
Fleece Performance Engineering FPE-CRTFL-19 Turbocharger Oil Feed Line (2019-2024 6.7L Cummins)
Fits: Cummins 6.7L (2019-Current Cummins)
Diesel Dollars is Southern Diesel Supply's Loyalty Program. Purchasing with Us Earns you 1 Point for every 1 Dollar spent to use for future buys!
By ordering the Fleece Performance Engineering FPE-CRTFL-19 Turbocharger Oil Feed Line (2019-2024 6.7L Cummins) you will earn 70 DIESEL DOLLARS in your SDS Fuel Tank!
The Fleece Performance Engineering FPE-CRTFL-19 is a turbocharger oil feed line for 2019-2024 Ram 2500 and 3500 pickups with the 6.7L Cummins. It replaces Chrysler Part No. 68444984AA and fits a stock Holset VGT or a Fleece Cheetah turbo in the factory location. You buy it so the turbo on your truck has a good oil supply line after a repair.
Fitment
Fits 2019-2024 Ram 2500 and 3500 pickups with the 6.7L Cummins and a Cheetah or stock Holset VGT turbocharger in the factory location. Fleece lists it for 2019 and newer trucks, but the 2025 and later 6.7L changed substantially, and 2019-2024 engine parts should not be assumed to fit a 2025. Verify fitment by VIN.
Ram 3500, 4500 and 5500 chassis cabs run the same engine family on a separate calibration with the Aisin AS69RC, so check with us before ordering for a chassis cab. Fleece sells a separate oil feed line for 1991-2018 Cummins trucks. Browse more for your truck in our Cummins section.
Why this part
Fleece built this replacement oil feed line kit to make sure your turbocharger has a good oil supply line. It is a -6 line made from extra flexible smooth bore Teflon hose, and it wears a thermal heat shield. Two -6AN to M12 aluminum fittings with sealing washers come with it.
The turbo on a 2019-2024 6.7L has a few known problems. Soot and oil coking stick the VGT vanes, starting with a weak exhaust brake and moving to low boost and limp mode. Bearing wear or a failed oil seal shows up as a siren whine, blue smoke or oil in the intake and condemns the cartridge. When the turbo comes off for a repair or a replacement, a new feed line on reassembly is one less question. If you are replacing the turbo, check the build sheet for sales code ETL (standard output) or ETM (high output) before you order it. Replacement units are in our turbo section.
Oil care helps the turbo too. The recommended habits on this engine are the correct 10W-30 or 5W-40 CK-4 oil, shorter intervals when towing or idling, and oil analysis 500-1,000 miles before each change to catch turbo metal early. Factory oil intervals instead of extended ones, a full warm-up before load and an idle-down after hard pulls round it out.
What you get
- One -6 turbocharger oil feed line, extra flexible smooth bore Teflon hose with a thermal heat shield
- Two -6AN to M12 aluminum fittings
- Sealing washers
Specifications
Features:
- -6 Oil Feed Line
- Includes 2, -6AN to M12 aluminum fittings with sealing washers
- Extra Flexible Smooth Bore Teflon Hose with thermal heat shield
Application Notes:
- Replaces Chrysler Part No.: 68444984AA
Warranty:
- 1 Year Limited Parts Warranty
About Fleece Performance Engineering
Fleece Performance Engineering is the Pittsboro, Indiana company Brayden and Chase Fleece launched in 2008. Beyond its turbochargers and turbo plumbing, Fleece is known for PowerFlo lift pumps and Freedom Series cylinder heads, along with fuel, cooling and transmission line kits. Its parts cover Cummins, Duramax and Powerstroke trucks.
Frequently asked questions
Will this fit my 2016 Ram 2500?
No. This line is for 2019-2024 trucks. Fleece makes a separate oil feed line for 1991-2018 5.9L and 6.7L Cummins trucks.
Does it work with a Cheetah turbo?
Yes. Fleece designed it for a Cheetah or a stock Holset VGT turbocharger in the factory location.
What warranty does it carry?
It is covered by a 1 Year Limited Parts Warranty.
Questions on fitment? Call the shop at the number in the header. We install everything we sell.

Diesel Dollars is Southern Diesel Supply's Loyalty Program. Purchasing with Us Earns you 1 Point for every 1 Dollar spent to use for future buys!
By ordering the Fleece Performance Engineering FPE-CRTFL-19 Turbocharger Oil Feed Line (2019-2024 6.7L Cummins) you will earn 70 DIESEL DOLLARS in your SDS Fuel Tank!


