











S&B 75-5140 Cold Air Intake (2020-2026 6.7L Powerstroke)
Fits: Ford 6.7L (2017-Current Powerstroke)
Diesel Dollars is Southern Diesel Supply's Loyalty Program. Purchasing with Us Earns you 1 Point for every 1 Dollar spent to use for future buys!
By ordering the S&B 75-5140 Cold Air Intake (2020-2026 6.7L Powerstroke) you will earn 380 DIESEL DOLLARS in your SDS Fuel Tank!
The S&B 75-5140 Cold Air Intake fits 2020-2026 Ford Super Duty trucks with the 6.7L Power Stroke. It trades the factory intake for an enclosed box with a snap-in lid, silicone seals and a washable filter, and S&B rates it at up to 39.05% more airflow than stock with a 99.42% efficiency rating.
Fitment
This listing is for 2020-2026 Ford Super Duty trucks with the 6.7L Power Stroke (more Power Stroke parts). S&B lists the 75-5140 for 2020-2026. 2017-2019 trucks share the same 6.7L generation but are not covered by this listing, so do not assume it fits one. F-450, F-550 and chassis-cab owners should call before ordering too. Verify fitment by VIN or call the shop.
Why this part
S&B designed this air intake system to increase torque and horsepower and improve overall performance. The intake tube was built with minimal bends and connects directly to the turbo inlet, and that layout gives an increase in airflow of up to 39.05% over stock. The filter carries a 99.42% efficiency rating, so the extra air is still filtered air.
The airbox is fully enclosed. Its snap-in lid has a silicone edge that keeps engine heat and unwanted debris away from the air filter, so the intake is not just pulling hot under-hood air.
S&B uses silicone because it holds up. Silicone is durable yet elastic enough to stretch and then snap into a perfect seal, and it can withstand temperatures up to 400° F without cracking or tearing with age. The optional silicone box plug is made from the same material. Compare it with our other diesel intakes.
What you get
- Enclosed airbox with snap-in lid and silicone edge
- Washable, reusable air filter
- Intake tube with minimal bends that connects directly to the turbo inlet
- Optional silicone box plug
- Injection-molded MAF plate for your stock MAF sensor
Specifications
- Washable & Reusable Filter
- Innovative Snap-In Lid Design
- 39.05% More Airflow Than Stock
Filter efficiency: 99.42%.
Silicone temperature rating: up to 400° F.
This listing carries two SKUs, 75-5140 and 75-5140D. S&B offers its intakes with either a cotton cleanable filter or a dry filter, so check the variant you pick or call us.
Manufacturer warranty: Million Mile Limited.
Installation notes
The snap-in lid needs no screws to secure it to the intake box, which makes the install and later filter inspections fast. The silicone box plug can be installed or removed with ease. S&B's engineers built the system to work with your stock MAF sensor through an injection-molded MAF plate, and it is designed to avoid check engine lights.
About S&B
Based in Fontana, California, with roots going back to 1975, S&B Filters makes intakes, replacement filters, intercooler pipes and boot kits, body mounts and replacement fuel tanks for diesel pickups. Its 6.7L Powerstroke intakes sit alongside kits for LB7 through L5P Duramax and 5.9L and 6.7L Cummins. We stock S&B because the parts fit the trucks we work on every day.
Frequently asked questions
Will this fit my 2018 F-250?
S&B lists the 75-5140 for 2020-2026 trucks. A 2017-2019 truck has the same generation of 6.7L, but it is not covered by this listing. Call us with your VIN and we will tell you what fits.
Can I wash the filter?
Yes. The filter is washable and reusable, and the snap-in lid means there are no screws to remove to reach it.
Will it set a check engine light?
S&B designed the system around an injection-molded MAF plate that works with your stock MAF sensor, specifically to avoid check engine lights.
Questions on fitment? Call the shop at the number in the header. We install everything we sell.
✓ added to your cart
Finish the job
Parts our Wildwood techs pair with this one — take a look before you check out.

Diesel Dollars is Southern Diesel Supply's Loyalty Program. Purchasing with Us Earns you 1 Point for every 1 Dollar spent to use for future buys!
By ordering the S&B 75-5140 Cold Air Intake (2020-2026 6.7L Powerstroke) you will earn 380 DIESEL DOLLARS in your SDS Fuel Tank!



