Exergy Performance 1-018-132 M18X1.5 Rail End to M14X1.5
Fits: RAM • Chevrolet • GMC • Ford
Diesel Dollars is Southern Diesel Supply's Loyalty Program. Purchasing with Us Earns you 1 Point for every 1 Dollar spent to use for future buys!
By ordering the Exergy Performance 1-018-132 M18X1.5 Rail End to M14X1.5 you will earn 64 DIESEL DOLLARS in your SDS Fuel Tank!
The Exergy Performance 1-018-132 is a rail end that goes from M18x1.5 to M14x1.5. It adapts an M18x1.5 rail connection so it can take M14x1.5 hardware. Exergy does not publish a vehicle list for it, so you match it by the threads on your rail and on whatever you are connecting to it.
Fitment
Exergy lists this part under its general fittings with no engine or model-year list. Match it by thread. The rail side is M18x1.5, an 18 mm thread with a 1.5 mm pitch, and the other side is M14x1.5, a 14 mm thread with the same 1.5 mm pitch. Exergy also makes a separate rail end to M14x1.5 built for the LB7 Duramax, so LB7 owners should call us before ordering this one. For anything else, send us your VIN and tell us which rail port you are working on.
Why this part
Rail ports and the lines or fittings you want to run do not always share a thread. When the rail side is M18x1.5 and the hardware you are connecting is M14x1.5, this rail end is the step between the two. It comes from Exergy, which builds the rails, pumps and relief valves on the high-pressure side of common-rail diesels, so the adapter on your rail is made by the same people who make rails.
What you get
- M18x1.5 rail end to M14x1.5, Exergy part number 1-018-132
Exergy's listing does not mention seals or other hardware with it.
Specifications
- Part number / SKU: 1-018-132
- Threads: M18x1.5 rail end to M14x1.5
- Condition: New
- Shipping weight (Exergy listing): 1.0 lb
- Package dimensions (Exergy listing): 2.0 in W x 1.0 in H x 4.0 in L
About Exergy Performance
Exergy Performance builds the high-pressure side of common-rail diesels for Cummins, Duramax and Powerstroke owners. The range runs from performance injector sets and CP3 pumps to fuel rails, rail pressure sensors and relief valves, plus the plug kits, fittings and seal kits around them. Shop it all at Exergy Performance.
Frequently asked questions
Will this fit my LB7 Duramax?
Exergy makes a separate rail end to M14x1.5 specifically for the LB7. Call us with your VIN before you order so we can make sure you get the right one.
What is the difference between this and the M18x1.5 rail plug?
The rail plug closes an M18x1.5 port. This rail end converts it to M14x1.5 so something can connect there. Pick the plug if the port is being shut off and the rail end if something is being plumbed in.
Can you install it?
Yes. We install everything we sell. If you are re-plumbing a rail, call the shop and we will go over the whole setup with you.
Questions on fitment? Call the shop at the number in the header. We install everything we sell.
Diesel Dollars is Southern Diesel Supply's Loyalty Program. Purchasing with Us Earns you 1 Point for every 1 Dollar spent to use for future buys!
By ordering the Exergy Performance 1-018-132 M18X1.5 Rail End to M14X1.5 you will earn 64 DIESEL DOLLARS in your SDS Fuel Tank!