Exergy Performance 1-018-149 M12X1.5 to -8AN HIGH Flow CP3 Supply Fitting
Fits: RAM • Chevrolet • GMC • Ford
Diesel Dollars is Southern Diesel Supply's Loyalty Program. Purchasing with Us Earns you 1 Point for every 1 Dollar spent to use for future buys!
By ordering the Exergy Performance 1-018-149 M12X1.5 to -8AN HIGH Flow CP3 Supply Fitting you will earn 32 DIESEL DOLLARS in your SDS Fuel Tank!
Exergy Performance part number 1-018-149 is the -8AN version of Exergy's high flow CP3 supply fitting. One end threads into a CP3 supply port with an M12x1.5 thread, and the other end takes a -8AN line. It is the fitting to use when the fuel supply to your CP3 is plumbed in -8AN and you want a single-piece connection at the pump.
Fitment
There is no vehicle application list for 1-018-149 on Exergy's site, and our listing is not tied to a particular engine. Two things decide whether it fits your setup: an M12x1.5 thread at the CP3 supply port, and a -8AN line feeding it. If both match, the fitting fits. If you do not know what thread your pump uses, call us with your VIN before you order and we will look it up.
Why this part
The -8AN end takes a larger line than the -6AN version of this fitting, part number 1-018-148. That makes 1-018-149 the one to use when the rest of your supply side is built around -8AN plumbing. Carrying the line size all the way to the pump means you are not stepping it down with extra adapters right at the inlet, and fewer joints at the pump means fewer places for a leak to start.
What you get
- One Exergy Performance M12x1.5 to -8AN High Flow CP3 Supply Fitting, part number 1-018-149
Specifications
- Part number: 1-018-149
- Pump-side thread: M12x1.5
- Line-side connection: -8AN
- Brand: Exergy Performance
- Condition: New
- Shipping weight (Exergy listing): 1.0 lbs
- Package dimensions (Exergy listing): 2.0 in W x 2.0 in H x 4.0 in L
About Exergy Performance
Exergy Performance focuses on the high-pressure side of common-rail Cummins, Duramax and Power Stroke engines. Its catalog runs from performance injector sets and CP3 and CP4.2 pumps to fuel rails, rail pressure sensors and pressure relief valves, plus the supply fittings and seal kits that go with them. Shop the full Exergy Performance line.
Frequently asked questions
What is the difference between 1-018-149 and 1-018-148?
Only the line end. 1-018-149 has a -8AN end and 1-018-148 has a -6AN end. Both thread into the CP3 supply port with an M12x1.5 thread.
How much flow does it support?
Exergy calls it a high flow fitting but does not publish a flow rating for it, and we will not guess at one. If you are sizing a fuel supply for a specific power goal, call us and we will talk through the whole supply side with you, not just the fitting.
Can you install it for me?
Yes. We are a working diesel repair shop in Wildwood, FL, and we install what we sell. Call the shop to set up a time.
Questions on fitment? Call the shop at the number in the header. We install everything we sell.
Diesel Dollars is Southern Diesel Supply's Loyalty Program. Purchasing with Us Earns you 1 Point for every 1 Dollar spent to use for future buys!
By ordering the Exergy Performance 1-018-149 M12X1.5 to -8AN HIGH Flow CP3 Supply Fitting you will earn 32 DIESEL DOLLARS in your SDS Fuel Tank!