Filters
3 products
Not sure it fits your truck?
Our Wildwood, FL techs will confirm the right part for your build before you buy.
Call or Text (352) 722-5295Monitor mounts on the 2017-2019 Ford 6.7L Powerstroke
A monitor only helps if you can see it without hunting for it. On the 2017-2019 Super Duty, the choices here are the A-pillar, a dash vent, or a bracket built for your display. The 2017 cab was all-new, and Ford kept that cab through the 2020 refresh, so cab-mounted parts generally run 2017-2022. That is why the Edge and SPE mounts here are listed for 2017-2022 6.7L Powerstroke trucks.
Choosing the right mount
With mounts, the usual problem is buying the wrong one. A mount has to match two things: the truck and the display. A-pillar pods are shaped for a specific vehicle. A 52 mm gauge mount holds a round 52 mm (2-1/16 inch) gauge, not a rectangular screen. A bracket made for one brand of display may not hold another. Check both before you order.
Vehicle-specific vs. universal
A vehicle-specific mount, like an A-pillar pod, puts the display in a set spot built for your cab. A universal mount, such as a suction cup, a surface mount or a 52 mm gauge-hole mount, trades that fitted look for flexibility. Pick vehicle-specific if the monitor is staying in this truck. Pick universal if you move the screen between vehicles or want to try a few spots first.
What we carry
- Edge Products 18601 A-Pillar Display Mount, listed for 2017-2022 6.7L Powerstroke trucks, for an Edge display.
- SPE Motorsport S200122 vent gauge mount, which holds a 52 mm (2-1/16 inch) gauge at a dash vent and is listed for 2017-2022 6.7L Powerstroke trucks.
- No Limit Fabrication Edge Clean Mount, a bracket made for an Edge display, listed for 6.7L Powerstroke trucks through 2019.
Fitment notes
Read the year range on each product. The Edge and SPE mounts list 2017-2022, matching the cab that carried through the 2020 refresh. The No Limit mount's range ends at 2019, so it is not catalogued for 2020-2022 trucks. Also confirm which display or gauge each mount was made for. Chassis cab trucks differ from pickups in many parts, so verify by VIN with the fitment checker. The 6.7L Powerstroke hub has the rest of the parts for this engine.
Frequently asked questions
Which mount works with my Edge Insight CTS3?
The Edge A-pillar display mount and the No Limit Fabrication Edge Clean Mount are both made for Edge displays. Check each product page to confirm the CTS3 is covered. The SPE vent mount is for a round 52 mm gauge, not the CTS3 screen.
Will a mount from this page fit my 2021 F-250?
The Edge and SPE mounts are listed for 2017-2022, because the cab carried over through the 2020 refresh. The No Limit mount is listed through 2019 only. Run your exact year through the fitment checker.
Is an A-pillar mount universal?
No. A-pillar pods are vehicle-specific. If you want something that moves between trucks, suction, surface and 52 mm gauge-hole mounts are universal.
Not sure what fits? Call the shop at the number in the header, or use the fitment checker on any product page. We install everything we sell.