2004.5-2007 Dodge 5.9L Cummins Exhaust Accessories

Exhaust accessories for the 2004.5-2007 Ram 2500 and 3500 with the 5.9L Cummins: BD exhaust brakes and their air kits, a V-band clamp, tips, heat wrap and MAHLE head sets. If you tow, the exhaust brake is the accessory that earns its place on this truck. It adds engine braking and keeps your service brakes cooler, and BD splits the parts by model year.

Filters

Sort by:

Not sure it fits your truck?

Our Wildwood, FL techs will confirm the right part for your build before you buy.

Call or Text (352) 722-5295

Exhaust accessories for the 2004.5-2007 RAM 5.9L Cummins

From 2004.5 on, this Cummins left the factory with a 4-inch exhaust and a catalytic converter behind the Holset HE351CW turbo. Earlier 2003 and early 2004 trucks ran a 3.5-inch downpipe with no converter. The parts in this section work around that 4-inch system: a brake at the turbo or in the pipe, a clamp at a joint, a tip at the tailpipe. For complete cat-backs, mufflers and manifold parts, see this truck's other exhaust sections, or our main exhaust page for other trucks.

Exhaust brakes: matching the year

An exhaust brake adds engine braking for towing and keeps the service brakes cooler. BD Diesel covers this truck two ways. The remote-mount 4-inch brakes install away from the turbo and come in a 2003-2005 version (BD 1027338) and a 2006-2007 version (BD 1027330). For BD's turbo-mount brakes, the air kits are split the same way: 2023331 for 2004.5-2005 and 2023330 for 2006-2007. You'll also find BD's 1030900 manual transmission lever switch, listed for 1989-2007 Cummins trucks, and the BD 1405926 exhaust V-band clamp. A 2004.5 truck is a 2004 model year, so it takes the earlier part.

What we carry

Tips are a looks choice, but the inlet has to match your pipe. The factory exhaust on a 2004.5-2007 is 4-inch, and most of the MBRP tips here have a 4-inch inlet with outlets from 4 to 8 inches, in straight cut, angle cut, rolled edge, single wall, dual wall, turndown and a black hex finish. PPE adds 3-inch and 4-inch stainless tips. Mishimoto brings a 6-inch polished angle-cut tip and the MMTW-235 exhaust heat wrap set. This section also carries MAHLE HS54556 and HS54557 head sets, listed for 2003-2007 5.9L engines.

Fitment notes

Read the year range on every brake part, because BD changes parts at 2006. On 2007 trucks, confirm the engine first: the 5.9L and the 6.7L were both sold as 2007 models, and exhaust parts follow the engine, not the year. If your truck already has an aftermarket cat-back, measure the tailpipe before picking a tip. When in doubt, verify by VIN.

Frequently asked questions

Which exhaust brake fits my 2004.5-2007 5.9L?

It comes down to model year. BD's remote-mount 4-inch brake is 1027338 for 2003-2005 trucks and 1027330 for 2006-2007. A 2004.5 truck is a 2004 model year, so it falls in the earlier group. On a 2007, make sure the truck has the 5.9L before ordering.

Is an exhaust brake worth it if I tow?

For towing, it's the most useful part in this section. An exhaust brake adds engine braking and keeps your service brakes cooler. Most of the BD brake parts here are listed by year range, so match yours before you buy.

What size exhaust tip do I need?

Match the inlet to your tailpipe. A stock 2004.5-2007 runs a 4-inch exhaust, so a 4-inch-inlet tip fits, and the outlet size is up to you. If you've installed a 5-inch cat-back, check that kit's tailpipe size before choosing.

Not sure what fits? Call the shop at the number in the header, or use the fitment checker on any product page. We install everything we sell.