{"product_id":"hamilton-cams-07-c-188-220s-188-220-steel-cam-1989-2018-cummins","title":"Hamilton Cams 07-c-188\/220S 188\/220 Steel Cam (1989-2018 5.9\/6.7L Cummins)","description":"\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\" aria-labelledby=\"tab-title-description\"\u003e\n\u003ch3\u003eInformation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRPM Range: 1700-4500\u003c\/li\u003e\n\u003cli\u003eDrops EGT 200-300\u003c\/li\u003e\n\u003cli\u003eIncreased  power we have seen 40-60hp depending on fueling and turbo.\u003c\/li\u003e\n\u003cli\u003eDuration at .050″ of lift  188 Intake, 220 Exhaust\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWe only offer warranty on our cams if our lifters and springs are used.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eModification Required:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor it to be “drop in” on a 12v you will need no more than .018″ piston protrusion and at least .055″ valve face depth with a standard head gasket and a 99 intake centerline. On a 24v you will need no more than .018″ piston protrusion and at least .038″ valve face depth with a standard gasket. If you do not meet the minimum requirements for piston to valve clearance, don’t worry, you can still run an oversize head gasket or cut valve reliefs.\u003c\/li\u003e\n\u003cli\u003eAlthough this is considered a drop in cam it is important to check clearances\u003c\/li\u003e\n\u003cli\u003eFor the Steel version you will need at least two bushings installed in the cam tunnel, otherwise the steel could eat into the cast iron block\u003c\/li\u003e\n\u003cli\u003eWe always recommend new lifters when changing a cam.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrag strip\u003c\/li\u003e\n\u003cli\u003eStock class pulling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBreak in:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eTo make sure that you have no issues during break-in, follow these few suggestions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMake sure that the cam has a Liberal amount of quality assembly lube applied\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDO NOT let the engine start without oil pressure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen this is a new engine, be sure to put a liberal amount of assembly lube in the oil pump and prime the oil filter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBe sure to change the oil after you have done your break-in procedure. When the filter and oil system are already primed, engine will get oil pressure much faster than if the oil is changed at the same time.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDisconnect the fuel system and spin the engine with the starter until oil pressure can be read or until oil is coming out of the rocker arms.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnce oil pressure has been verified, let the engine start and run until up to operating temp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjust valves then you are cleared to abuse your engine. Enjoy the added airflow\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eif you need to re-torque or “hot-torque “the head, do so before adjusting valves. When you retorque the head, the valve lash setting, so it is important to set lash last.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Hamilton Cams","offers":[{"title":"Default Title","offer_id":51105650966816,"sku":"07-c-188\/220S","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/hamilton-cams-07-c-188220s-188220-steel-cam-1989-2018-cummins-7192225.jpg?v=1779544748","url":"https:\/\/www.southerndieselsupply.com\/products\/hamilton-cams-07-c-188-220s-188-220-steel-cam-1989-2018-cummins","provider":"Southern Diesel Supply","version":"1.0","type":"link"}