{"title":"RAM, (2019-2024) 6.7L Cummins, Digital Monitors, Mounts","description":"\u003cdiv class=\"sds-copy-intro\"\u003e\u003cp\u003eMonitor mounts for the 2019-2024 Ram 2500 and 3500 with the 6.7L Cummins. Here's the fact that matters: pillar mounts are built for one cab generation. Edge's 38603 A-pillar mount fits this generation of Ram HD, from 2019 through 2026, as long as the truck does not have the factory Head-Up Display.\u003c\/p\u003e\u003c\/div\u003e\u003cdiv class=\"sds-copy-guide\"\u003e\n\u003ch2\u003eMonitor mounts for the 2019-2024 RAM 6.7L Cummins\u003c\/h2\u003e\n\u003cp\u003eThe 2019 Ram HD was a clean-sheet redesign with an all-new interior, and pillar hardware doesn't carry over between generations. A pillar mount gives a gauge monitor a fixed home where you can read it without hunting for it. The 38603 is Edge's pillar mount for this generation, and it's the mount Edge pairs with the Insight CTS3 touchscreen monitor on the 2019 and newer Ram 2500\/3500.\u003c\/p\u003e\n\u003ch2\u003eWhat to check before you buy\u003c\/h2\u003e\n\u003cp\u003eThere's no known failure pattern for monitor hardware on this truck, so the risk is ordering the wrong piece. The two ways to get it wrong are the wrong generation and the wrong equipment. The 38603 is listed for 2019-2026 Ram 2500 and 3500 pickups, and Edge excludes trucks with the factory Head-Up Display. If your truck has the HUD, this mount is not the one.\u003c\/p\u003e\n\u003ch2\u003eWhat we carry\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eEdge 38603 A-Pillar Display Mount\u003c\/strong\u003e from \u003ca href=\"\/collections\/edge-products\"\u003eEdge Products\u003c\/a\u003e: an A-pillar mount made for the 2019 and newer Ram 2500\/3500 with the 6.7L Cummins, built to hold Edge's Insight CTS3.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eThe mount is just the mount. The Insight CTS3 monitor lives in the monitors collection for this truck, and the Edge EGT and pressure sensor kits are in accessories. The CTS3 reads the truck through the OBD-II port and does no tuning.\u003c\/p\u003e\n\u003ch2\u003eFitment notes\u003c\/h2\u003e\n\u003cp\u003eThe 38603 fits Ram 2500 and 3500 pickups from 2019 through 2026. It is not listed for the Ram 1500, and it is not for trucks with the factory Head-Up Display. It doesn't matter whether you have the standard-output or high-output \u003ca href=\"\/collections\/cummins\"\u003e6.7L Cummins\u003c\/a\u003e, since the mount goes in the cab, not on the engine. Check your window sticker or build sheet for the HUD, or verify by VIN with us.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill the 38603 fit my Ram with a Head-Up Display?\u003c\/h3\u003e\n\u003cp\u003eNo. Edge lists the 38603 for 2019-2026 Ram 2500 and 3500 pickups without the factory Head-Up Display. If your truck has the HUD, call us before you order anything for the pillar.\u003c\/p\u003e\n\u003ch3\u003eWill this mount fit a 2018 or older Ram?\u003c\/h3\u003e\n\u003cp\u003eNo. Pillar mounts are generation-specific, and the 2019 redesign brought an all-new interior. The 38603 is listed for 2019-2026 Ram 2500\/3500 only.\u003c\/p\u003e\n\u003ch3\u003eDoes the mount come with a monitor?\u003c\/h3\u003e\n\u003cp\u003eNo, it's the mount only. Pair it with the Edge Insight CTS3, a touchscreen monitor that works on any OBD-II vehicle from 1996 on and does no tuning.\u003c\/p\u003e\n\u003cp class=\"sds-copy-cta\"\u003eNot sure what fits? Call the shop at the number in the header, or use the fitment checker on any product page. We install everything we sell.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"edge-products-38603-a-pillar-display-mount-2019-2025-ram-cummins","title":"Edge Products 38603 A-Pillar Display Mount (2019-2025 6.7L Cummins)","description":"\u003cdiv class=\"sds-pd-intro\"\u003e\u003cp\u003eThe Edge Products 38603 is a cast aluminum A-pillar mount that gives an Edge monitor a fixed home on 2019-2025 Ram 2500 and 3500 pickups with the 6.7L Cummins. It mounts at the factory grab handle location with no drilling and puts the screen in your line of sight without blocking the road. It does not fit Rams with a Heads Up Display.\u003c\/p\u003e\u003c\/div\u003e\u003cdiv class=\"sds-pd-body\"\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits 2019-2025 Ram 2500 and Ram 3500 pickups, single or dual rear wheel, with the 6.7L \u003ca href=\"\/collections\/cummins\"\u003eCummins\u003c\/a\u003e. Our engine tag for this mount reads 2019-current, but the part is listed through 2025, so treat 2026 and newer trucks as unconfirmed and verify fitment by VIN.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Does not fit Rams equipped with Heads Up Display (HUD).\u003c\/strong\u003e Check your dash before you order. Ram 3500, 4500 and 5500 chassis cabs share the engine family but are separate trucks with their own setup, so ask us about those. If your Ram is a 2010-2018, you want the Edge 38602 instead. Send us your VIN or call the shop and we will confirm the right mount.\u003c\/p\u003e\n\u003ch2\u003eWhy this part\u003c\/h2\u003e\n\u003cp\u003eEdge made this mount to replace its standard suction-cup mount with something permanent and specific to the truck. The cast aluminum body is molded for the 2019-2025 Ram pillar, sets the monitor in a clean viewing position, and has an OEM look in the cab. It is a solid mounting point, so the screen stays where you put it.\u003c\/p\u003e\n\u003cp\u003eOn 2019-2024 trucks, the factory variable-geometry turbo is the part we watch. Soot and oil coking can stick its vanes. The first sign is usually a weaker exhaust brake, then low or erratic boost, high EGTs and limp mode, and the trouble commonly shows up between 50,000 and 150,000 miles. Underboost (P0299) can come from boost leaks, a clogged air filter or the actuator, and overboost (P0234) almost always means vanes stuck closed. The electronic actuator can also fail on its own and take the exhaust brake with it. A monitor at eye level that shows boost makes those changes easier to catch.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEdge Products 38603 cast aluminum A-pillar display mount in matte black\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eDual t-slot mount for the monitor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003eEdge lists these features for the 38603:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast aluminum for rigidity and solid mounting\u003c\/li\u003e\n\u003cli\u003eCustom molded for vehicle specific fitment\u003c\/li\u003e\n\u003cli\u003ePaintable finish for complete end user customization\u003c\/li\u003e\n\u003cli\u003eNo drilling required, mounts using existing A-Pillar grab handle location\u003c\/li\u003e\n\u003cli\u003eLocates monitor in optimum viewing position\u003c\/li\u003e\n\u003cli\u003eHardware and dual t-slot mount included\u003c\/li\u003e\n\u003cli\u003eWorks with all CTS3, Trinity 2 and Dashpaq Plus devices\u003c\/li\u003e\n\u003cli\u003eAlso works with older CTS2 and CS2 style monitors\u003c\/li\u003e\n\u003cli\u003eMay work with other aftermarket mounts that use similar uni-ball construction\u003c\/li\u003e\n\u003cli\u003eNote: Does not fit Rams equipped with Heads Up Display (HUD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe 38603 needs no drilling. It mounts using the existing A-pillar grab handle location with the hardware in the box, and the monitor attaches to the dual t-slot mount. Before you start, confirm your truck does not have a Heads Up Display, because the mount will not fit a HUD-equipped Ram. The matte black finish takes paint if you want to match your interior.\u003c\/p\u003e\n\u003ch2\u003eAbout Edge Products\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/edge-products\"\u003eEdge Products\u003c\/a\u003e is an Ogden, Utah company, founded in 1999, that builds in-cab monitors and plug-in modules for diesel pickups. An Edge monitor puts boost, EGTs, trans temp and other readings on one screen and lets you set your own alerts. In our shop, the monitors and the mounts that hold them are the part of the Edge line we use most.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my Ram has a Heads Up Display?\u003c\/h3\u003e\n\u003cp\u003eA HUD projects speed and other readings onto the windshield in front of the driver. If your truck has one, this mount will not fit. If you are not sure, send us your VIN and we will check.\u003c\/p\u003e\n\u003ch3\u003eWhich Edge devices work with the 38603?\u003c\/h3\u003e\n\u003cp\u003eEdge lists it for all CTS3, Trinity 2 and Dashpaq Plus devices. It also works with older CTS2 and CS2 style monitors, and it may work with other aftermarket mounts that use a similar uni-ball construction.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit a 2026 Ram?\u003c\/h3\u003e\n\u003cp\u003eThe 38603 is listed for 2019-2025. For a 2026 truck, verify fitment by VIN or call us before you order.\u003c\/p\u003e\n\u003cp class=\"sds-pd-cta\"\u003eQuestions on fitment? Call the shop at the number in the header. We install everything we sell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Edge Products","offers":[{"title":"Default Title","offer_id":50449500864800,"sku":"38603","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/edge-products-38603-a-pillar-display-mount-2019-2025-ram-cummins-7105492.webp?v=1779546427"}],"url":"https:\/\/www.southerndieselsupply.com\/collections\/ram-2019-2024-6-7l-cummins-digital-monitors-mounts.oembed","provider":"Southern Diesel Supply","version":"1.0","type":"link"}