{"title":"Ford, (2023-present), 6.7L Powerstroke, Suspension, Lift Kit","description":"","products":[{"product_id":"5-inch-lift-kit-w-radius-arm-ford-f250-f350-super-duty-23-24-4wd-diesel-5-inch-block-with-3-leaf-main-fox-2-0-performance","title":"BDS Suspension 5 Inch Lift Kit w\/ Radius Arm (2023-2026 Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eImprove the ride on your 23-26 Ford Super Duty diesel truck with this 5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eSteering Correction\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Leaf Spring\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eVehicles with radius arm mounted ride height sensors will require BDS123303.\u003c\/li\u003e\n\u003cli\u003eFord recommends the replacement of the pitman arm nut after each time it has been removed.\u003c\/li\u003e\n\u003cli\u003eUse a small pitman arm puller to remove the drag link joint and steering stabilizer taper.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and Tire fitment section.\u003c\/li\u003e\n\u003cli\u003eMinor trimming may be necessary for clearance of 37x12.50 Tires on certain wheel setups.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 406 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eVehicles with leaf spring ride height sensors must select the rear block option.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Lift Option\u003c\/strong\u003e \u003cstrong\u003e5 Inch Block with 3 Leaf Main\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome F250\/350 factory options increase the main leaf pack count from 2 to 3 leaf's (this is for top overload options only). Be sure to verify which factory leaf spring configuration your vehicle has and choose the appropriate option.\u003c\/p\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eLarge 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013414, 2017-2024 Super Duty 4 inch Front Box Kit, UPC Code 658848613458\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013516, 2017-2024 F250 5 inch Rear Block Kit -3 Leaf Main, UPC Code 658848613595\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033411, 2005-2024 Ford F250\/F350 Superduty 4 inch Coil Kit - Diesel, UPC Code 658848616527\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123263, 2023-2024 Ford F250\/350 4wd Radius Arm Kit, Pair, UPC Code 711745612709\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224700, Fox 2.0 Shock 25.65 x 16.05 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"5 inch Block Kit without Overload \/ FOX 2.0 Performance Series","offer_id":50788553130272,"sku":"BDS2242FS","price":2313.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit without Overload \/ NX2 Nitro Series","offer_id":50788553163040,"sku":"BDS2242H","price":1713.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit without Overload \/ FOX 2.5 Performance Elite","offer_id":50788553195808,"sku":"BDS2242FPE","price":5085.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit with Overload \/ FOX 2.0 Performance Series","offer_id":50788553228576,"sku":"BDS2203FS","price":2313.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit with Overload \/ NX2 Nitro Series","offer_id":50788553261344,"sku":"BDS2203H","price":1713.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit with Overload \/ FOX 2.5 Performance Elite","offer_id":50788553294112,"sku":"BDS2205FPE","price":5085.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.0 Performance Series","offer_id":50788553326880,"sku":"BDS2208FS","price":3265.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ NX2 Nitro Series","offer_id":50788553359648,"sku":"BDS2208H","price":2665.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.5 Performance Elite","offer_id":50788553392416,"sku":"BDS2210FPE","price":6037.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-5-inch-lift-kit-w-radius-arm-2023-2026-powerstroke-4wd-6728164.jpg?v=1779549972"},{"product_id":"3-inch-lift-kit-w-radius-arm-ford-f250-f350-super-duty-23-24-4wd-fox-2-5-performance-elite","title":"BDS Suspension 3 Inch Lift Kit w\/ Radius Arm (2023-2026 Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eLevel out and take your 23-26 Ford Super Duty diesel powered truck with this 3-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty replacement radius arms, high strength 1-3\/8 inch solid steel track bar for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eHD Adjustable Track Bar\u003c\/p\u003e\n\u003cp\u003eMaintain proper handling and steering geometry with the BDS high strength adjustable track bar that allows you to recenter the front axle at a variety of lift heights. Built from 1-3\/8 inch solid steel stock, the track bar comes pre-assembled with bushings and is ready to bolt into the factory mounting points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eVehicles with radius arm mounted ride height sensors will require BDS123303.\u003c\/li\u003e\n\u003cli\u003eDesigned for use on diesel models, but can be installed on gas trucks, will achieve additional 1\/2 inch front ride height.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 406 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eDue to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and Tire fitment section.\u003c\/li\u003e\n\u003cli\u003eTrucks without top mounted overload spring will require (x4) UBT4031 available to purchase separately.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs ride smooth through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eAdjustable solid steel track bar designed to recenter the front axle\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eShock Option\u003c\/strong\u003e \u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance EliteSeries\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013108, 2017-2024 F250\/F350 1 inchRear Block Kit, UPC Code 658848613052\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013261, 2020-2024 F250\/350 2.5 inch Front Box Kit, UPC Code 658848613236\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033251, 2005-2024 Ford Super Duty 2.5 inch Coil Spring Box Kit, Front Diesel, Pair, UPC Code 658848616480\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123263, 2023-2024 Ford F250\/350 4wd Radius Arm Kit, Pair, UPC Code 711745612709\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326096, Kit: 2017-2024 Ford SD Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 0-1.5 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326097, Kit: 2017-2024 Ford SD Front, 2.5 Truck Fox Performance Elite Series, R\/R, 2-3.5 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":50788504338720,"sku":"BDS2200FS","price":2306.99,"currency_code":"USD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":50788504371488,"sku":"BDS2200H","price":1706.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50788504404256,"sku":"BDS2200FPE","price":5078.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-3-inch-lift-kit-w-radius-arm-2023-2026-powerstroke-4wd-2348321.jpg?v=1779549969"},{"product_id":"2-5-inch-lift-kit-w-radius-arm-ford-f450-super-duty-23-24-w-fox-performance-elite-shocks","title":"BDS Suspension 2.5 Inch Lift Kit w\/ Radius Arm (2023-2026 Powerstroke)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eLevel out and take your Ford Super Duty diesel powered truck with this 2.5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty replacement radius arms, high strength 1-3\/8 inch solid steel track bar for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eHD Adjustable Track Bar\u003c\/p\u003e\n\u003cp\u003eMaintain proper handling and steering geometry with the BDS high strength adjustable track bar that allows you to recenter the front axle at a variety of lift heights. Built from 1-3\/8 inch solid steel stock, the track bar comes pre-assembled with bushings and is ready to bolt into the factory mounting points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 2.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eDiesel vehicles with radius arm mounted ride height sensors will require BDS123303\u003c\/li\u003e\n\u003cli\u003eThis kit does not work with Gas models equipped with ride height sensors.\u003c\/li\u003e\n\u003cli\u003eDesigned for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1\/2 inch front ride height).\u003c\/li\u003e\n\u003cli\u003eLarger Tires on stock wheels are not recommended due to brake line clearance required. Use recommended specifications listed in Tire and wheel fitment section.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eWheel\/Tire Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMax Tire Size: 35x12.50\u003c\/p\u003e\n\u003cp\u003eFront Wheel: 20x8.25, 8.76 inch BS\u003c\/p\u003e\n\u003cp\u003eRear Outer: 20x8.25, -3.33 inch BS\u003c\/p\u003e\n\u003cp\u003eRear Inner: 20x8.25, 9.11 inch BS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs ride smooth through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eAdjustable solid steel track bar designed to recenter the front axle\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013207, 2020-2022 Ford F-450 4wd 2 inch Rear Block Kit, UPC Code 658848613137\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013263, 2020-2022 Ford F-450 Super Duty 4wd 2.5 inch Front Box Kit, UPC Code 658848613250\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033251, 2005-2024 Ford Super Duty 2.5 inch Coil Spring Box Kit, Front Diesel, Pair, UPC Code 658848616480\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123263, 2023-2024 Ford F250\/350 4wd Radius Arm Kit, Pair, UPC Code 711745612709\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326096, Kit: 2017-2024 Ford SD Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 0-1.5 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326097, Kit: 2017-2024 Ford SD Front, 2.5 Truck Fox Performance Elite Series, R\/R, 2-3.5 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.5 Performance Elite","offer_id":50751858245920,"sku":"BDS1306FPE","price":5197.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Performance Series","offer_id":50751858278688,"sku":"BDS1306FS","price":2425.99,"currency_code":"USD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":50751858311456,"sku":"BDS1306H","price":1825.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-25-inch-lift-kit-w-radius-arm-2023-2026-powerstroke-7977378.jpg?v=1779549610"},{"product_id":"3-inch-lift-kit-w-radius-arm-fox-2-5-coil-over-conversion-performance-elite-ford-f250-f350-super-duty-23-24-4wd","title":"BDS Suspension 4WD 3 Inch Lift Kit w\/ Radius Arm FOX 2.5 Coil-Over Conversion Performance Elite (2023-2024 Powerstroke)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eBuilt to Outperform, take your 23-24 Ford Super Duty diesel powered truck with this 3-inch radius arm lift kit with FOX 2.5 Performance Elite Coil-over shocks from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty replacement radius arms, high strength 1-3\/8 inch solid steel track bar for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003eHD Adjustable Track Bar\u003c\/p\u003e\n\u003cp\u003eMaintain proper handling and steering geometry with the BDS high strength adjustable track bar that allows you to recenter the front axle at a variety of lift heights. Built from 1-3\/8 inch solid steel stock, the track bar comes pre-assembled with bushings and is ready to bolt into the factory mounting points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eVehicles with radius arm mounted ride height sensors will require BDS123303.\u003c\/li\u003e\n\u003cli\u003eDesigned for use on diesel models, but can be installed on gas trucks, will achieve additional 1\/2 inch front ride height\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 406 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eDue to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and Tire fitment section.\u003c\/li\u003e\n\u003cli\u003eTrucks without top mounted overload spring will require (x4) UBT4031 available to purchase separately.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs ride smooth through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eAdjustable solid steel track bar designed to recenter the front axle\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013108, 2017-2024 F250\/F350 1 inchRear Block Kit, UPC Code 658848613052\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013261, 2020-2024 F250\/350 2.5 inch Front Box Kit, UPC Code 658848613236\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123263, 2023-2024 Ford F250\/350 4wd Radius Arm Kit, Pair, UPC Code 711745612709\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406426, Kit: BDS 2005-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 2.5 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224710, Fox 2.0 Shock 23.27 x 14.65 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224717, Fox 2.0 Shock 30.05 x 18.45 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":50746706395424,"sku":"BDS2201FPE","price":4620.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50746706428192,"sku":"BDS2202FPE","price":7392.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-3-inch-lift-kit-w-radius-arm-fox-25-coil-over-conversion-performance-elite-2023-2024-powerstroke-5883544.jpg?v=1779549606"},{"product_id":"5-inch-lift-kit-w-radius-arm-fox-2-5-coil-over-conversion-performance-elite-ford-f250-f350-super-duty-23-24-4wd-diesel-block-w-overload-2-0-performance","title":"BDS Suspension 4WD 5 Inch Lift Kit w\/ Radius Arm FOX 2.5 Coil-Over Conversion Performance Elite (2023-2024 Powerstroke)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eBuilt to outperform, upgrade your 23-24 Ford F250\/F350 Super Duty diesel powered truck with this 5-inch radius arm lift kit and FOX 2.5 Performance Elite Coil-over conversion from BDS Suspension.\u003c\/p\u003e\n\u003cp\u003eDesigned to improve stance, performance, and capability, this kit includes everything necessary to set your dually truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, heavy duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003eSteering Correction\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Leaf Spring\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eVehicles with radius arm mounted ride height sensors will require BDS123303.\u003c\/li\u003e\n\u003cli\u003eFord recommends the replacement of the pitman arm nut after each time it has been removed.\u003c\/li\u003e\n\u003cli\u003eUse a small pitman arm puller to remove the drag link joint and steering stabilizer taper.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and Tire fitment section.\u003c\/li\u003e\n\u003cli\u003eMinor trimming may be necessary for clearance of 37x12.50 Tires on certain wheel setups.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 406 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eTrucks without top mounted overload springs will require (4) UBT4028.\u003c\/li\u003e\n\u003cli\u003eVehicles with leaf spring ride height sensors must select the rear block option.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Lift Option \u003c\/strong\u003e\u003cstrong\u003eBlock Kit with Factory Overload\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded in the base system.\u003c\/li\u003e\n\u003cli\u003eMade of fabricated steel for high strength.\u003c\/li\u003e\n\u003cli\u003eDesigned to provide correct pinion angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShock Option \u003c\/strong\u003eFOX 2.0 Performance Series\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eLarge 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013414, 2017-2024 Super Duty 4 inch Front Box Kit, UPC Code 658848613458\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013516, 2017-2024 F250 5 inch Rear Block Kit -3 Leaf Main, UPC Code 658848613595\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123263, 2023-2024 Ford F250\/350 4wd Radius Arm Kit, Pair, UPC Code 711745612709\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406427, Kit: BDS 2005-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 4 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224700, Fox 2.0 Shock 25.65 x 16.05 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Block Kit With Factory Overload \/ FOX 2.0 Performance Series","offer_id":50745767526688,"sku":"BDS2203FPE","price":4633.99,"currency_code":"USD","in_stock":true},{"title":"Block Kit With Factory Overload \/ FOX 2.5 Performance Elites","offer_id":50745767559456,"sku":"BDS2206FPE","price":7405.99,"currency_code":"USD","in_stock":true},{"title":"Block Kit Without Factory Overload \/ FOX 2.5 Performance Elites","offer_id":50745767592224,"sku":"BDS2244FPE","price":7405.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.0 Performance Series","offer_id":50745767624992,"sku":"BDS2208FPE","price":5585.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.5 Performance Elites","offer_id":50745767657760,"sku":"BDS2211FPE","price":8357.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-5-inch-lift-kit-w-radius-arm-fox-25-coil-over-conversion-performance-elite-2023-2024-powerstroke-9981283.jpg?v=1779549550"}],"url":"https:\/\/www.southerndieselsupply.com\/collections\/ford-2023-present-6-7l-powerstroke-suspension-lift-kit.oembed","provider":"Southern Diesel Supply","version":"1.0","type":"link"}