{"title":"Ford, (2020-2022), 6.7L Powerstroke, Suspension, Lift Kits","description":"","products":[{"product_id":"5-inch-lift-kit-w-4-link-fox-2-5-performance-elite-coil-over-conversion-ford-f250-f350-super-duty-20-22-4wd-diesel","title":"BDS Suspension 5 Inch Lift Kit w\/ 4-Link FOX 2.5 Coil-Over Conversion (2020-2022 6.7L Powerstroke 4WD)","description":"\u003cdiv class=\"custom_overview\"\u003e\n\u003cdiv class=\"custom_overview_left\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eMaximize the capability of your Ford Super Duty diesel powered truck with this 5-inch lift kit with 4-Link and FOX 2.5 Performance Elite Coil-over conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, 4-link control arms with conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.\u003c\/p\u003e\n\u003ch2\u003e4-Link Conversion\u003c\/h2\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength ¼-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003ch2\u003eFOX Performance Elite Coil-Over\u003c\/h2\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"custom_overview_right\"\u003e\n\u003cdiv class=\"feature_benefits_panel\"\u003e\n\u003cp class=\"title\"\u003eFeatures \u0026amp; Benefits\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"max_tire_panel\"\u003e\n\u003cp class=\"title\"\u003eRecommended Tires \u0026amp; Wheels\u003c\/p\u003e\n\u003cp class=\"trimming_note\"\u003e(Trimming may be required)\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 17 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 with 18 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 with 20 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"help_text_container\"\u003e\n\u003cdiv class=\"help_text_item\"\u003e\n\u003ch3\u003e\u003cstrong\u003eRear Lift Option\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eBlock Kit\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded in the base system.\u003c\/li\u003e\n\u003cli\u003eMade of cast iron for high strength.\u003c\/li\u003e\n\u003cli\u003eDesigned to provide correct pinion angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eLeaf Springs\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates any need for a lift block.\u003c\/li\u003e\n\u003cli\u003eReduces axle wrap and creates a more controlled and stable feel.\u003c\/li\u003e\n\u003cli\u003eMulti-leaf progressive design for a smooth ride.\u003c\/li\u003e\n\u003cli\u003eMaintains factory payload weight ratings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"help_text_item\"\u003e\n\u003ch3\u003e\u003cstrong\u003eAuxiliary Front and Rear Shock Option\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4\u003eFOX 2.0 Performance Series\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDSC - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BDS Suspension","offers":[{"title":"Block Kit \/ FOX 2.0 Performance Series","offer_id":50783930876192,"sku":"BDS1567FPE","price":5030.99,"currency_code":"USD","in_stock":true},{"title":"Block Kit \/ FOX 2.5 Performance Elite","offer_id":50783930908960,"sku":"BDS1972FPE","price":7762.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.0 Performance Series","offer_id":50783930941728,"sku":"BDS1569FPE","price":5994.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.5 Performance Elite","offer_id":50783930974496,"sku":"BDS1973FPE","price":8726.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-5-inch-lift-kit-w-4-link-fox-25-performance-elite-coil-over-conversion-2020-2022-powerstroke-4wd-1835940.jpg?v=1779549910"},{"product_id":"9-inch-lift-kit-w-4-link-ford-f250-f350-super-duty-20-22-4wd-diesel-with-fox-2-0-performance-shocks","title":"BDS Suspension 9 Inch Lift Kit w\/ 4-Link (2020-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eTake your Ford Super Duty diesel truck to the next level with this 9-inch 4-Link lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 40 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arm conversion, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, bump stop extensions, stainless steel braided brake lines, NX2 steering stabilizer, and custom-tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes full replacement Glideride leaf springs to provide full lift height and increased capacity with a built in overload spring, u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003e4-Link Conversion\u003c\/p\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1\/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eT-Case Indexing\u003c\/p\u003e\n\u003cp\u003eAt this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Leaf Spring\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 9 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 8 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eIf equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)\u003c\/li\u003e\n\u003cli\u003e40 x 13.50 Tires WILL require trimming.\u003c\/li\u003e\n\u003cli\u003eTransfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a factory rear sway bar add: 123009\u003c\/li\u003e\n\u003cli\u003eIndexing ring has not been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes two BDS003839, 2017 F250\/F350 8 inch Rear Leaf Spring, UPC Code 658848611447\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013601, 2017-2022 Super Duty 4-Link Box Kit 1of2, UPC Code 658848613700\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013801, 2017 Super Duty 8 inch Front Box Kit, UPC Code 658848613830\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013809, 2017 Super Duty 8 inch Rear Box Kit, UPC Code 658848613847\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033811, 05 Ford F250 SD Diesel 8in Coil Kit, UPC Code 658848616602\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123805, 2020-2022 Ford Superduty 8 inch Transfer Case Indexing Ring Kit, UPC Code 711745612181\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224721, Fox 2.0 Shock - 27.95 x 17.35 x 2- Special\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224779, Fox 2.0 Shock 35.95 x 21.85 x 2-EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"NX2 Nitro Series","offer_id":50783928320288,"sku":"BDS1959H","price":3894.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Performance Series","offer_id":50783928287520,"sku":"BDS1959FS","price":4570.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-9-inch-lift-kit-w-4-link-2020-2022-powerstroke-4wd-5221441.jpg?v=1779549909"},{"product_id":"2-5-inch-lift-kit-w-radius-arm-ford-f450-super-duty-20-22-4wd-diesel-gas-fox-2-0-performance-shocks","title":"BDS Suspension 2.5 Inch Lift Kit w\/ Radius Arm (2020-2022 F-450 Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eLevel out and take your Ford F450 Super Duty diesel or gas powered truck with this 2.5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty replacement radius arms, high strength 1-3\/8 inch solid steel track bar for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eHD Adjustable Track Bar\u003c\/p\u003e\n\u003cp\u003eMaintain proper handling and steering geometry with the BDS high strength adjustable track bar that allows you to recenter the front axle at a variety of lift heights. Built from 1-3\/8 inch solid steel stock, the track bar comes pre-assembled with bushings and is ready to bolt into the factory mounting points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 2.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003cli\u003eDesigned for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1\/2 inch front ride height).\u003c\/li\u003e\n\u003cli\u003eLarger Tires on stock wheels are not recommended due to brake line clearance required. Use recommended specifications listed in Tire and wheel fitment section.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWheel\/Tire Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- Max Tire Size: 35x12.50\u003cbr\u003e- Front Wheel: 20x8.25, 8.76 inch BS\u003cbr\u003e- Rear Outer: 20x8.25, -3.33 inch BS\u003cbr\u003e- Rear Inner: 20x8.25, 9.11 inch BS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs ride smooth through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eAdjustable solid steel track bar designed to recenter the front axle\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013207, 2020-2022 Ford F-450 4wd 2 inch Rear Block Kit, UPC Code 658848613137\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013263, 2020-2022 Ford F-450 Super Duty 4wd 2.5 inch Front Box Kit, UPC Code 658848613250\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033251, 2005-2024 Ford Super Duty 2.5 inch Coil Spring Box Kit, Front Diesel, Pair, UPC Code 658848616480\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224710, Fox 2.0 Shock 23.27 x 14.65 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224717, Fox 2.0 Shock 30.05 x 18.45 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":50783058493728,"sku":"BDS1915FS","price":2430.99,"currency_code":"USD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":50783058526496,"sku":"BDS1915H","price":1830.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50783058559264,"sku":"BDS2219FPE","price":5162.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-25-inch-lift-kit-w-radius-arm-2020-2022-f-450-powerstroke-4wd-7482079.jpg?v=1779549908"},{"product_id":"2-5-inch-lift-kit-w-radius-arm-fox-2-5-performance-elite-coil-over-conversion-ford-f450-super-duty-20-22-4wd","title":"BDS Suspension 2.5 Inch Lift Kit w\/ Radius Arm FOX 2.5 Coil-Over Conversion (2020-2022 F-450 Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eBuild the ultimate Ford F450 Super Duty diesel powered truck with this 2.5-inch radius arm lift kit with FOX 2.5 Performance Elite coil-over shocks from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, heavy duty replacement radius arms, high strength 1-3\/8 inch solid steel track bar for steering correction, sway bar relocation, brake line brackets and secondary FOX 2.0 shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003eHD Adjustable Track Bar\u003c\/p\u003e\n\u003cp\u003eMaintain proper handling and steering geometry with the BDS high strength adjustable track bar that allows you to recenter the front axle at a variety of lift heights. Built from 1-3\/8 inch solid steel stock, the track bar comes pre-assembled with bushings and is ready to bolt into the factory mounting points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 2.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eDesigned for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1\/2 inch front ride height).\u003c\/li\u003e\n\u003cli\u003eLarger Tires on stock wheels are not recommended due to brake line clearance required.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eWheel\/Tire Specs:\u003cbr\u003e- Max Tire Size: 35x12.50\u003cbr\u003e- Front Wheel: 20x8.25, 8.76 inch BS\u003cbr\u003e- Rear Outer: 20x8.25, -3.33 inch BS\u003cbr\u003e- Rear Inner: 20x8.25, 9.11 inch BS\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eAdjustable solid steel track bar designed to recenter the front axle\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013207, 2020-2022 Ford F-450 4wd 2 inch Rear Block Kit, UPC Code 658848613137\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013263, 2020-2022 Ford F-450 Super Duty 4wd 2.5 inch Front Box Kit, UPC Code 658848613250\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406426, Kit: BDS 2005-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 2.5 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224710, Fox 2.0 Shock 23.27 x 14.65 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224717, Fox 2.0 Shock 30.05 x 18.45 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":49659096170784,"sku":"BDS1915FPE","price":4704.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-25-inch-lift-kit-w-radius-arm-fox-25-performance-elite-coil-over-conversion-202-2022-f-450-powerstroke-4wd-5960522.jpg?v=1779549907"},{"product_id":"6-inch-lift-kit-w-4-link-ford-f350-super-duty-drw-20-22-4wd-diesel-fox-2-0-performance-shocks","title":"BDS Suspension 6 Inch Lift Kit w\/ 4-Link (2020-2022 6.7L Powerstroke DRW, 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eTake your dual rear wheel inchDRW inch Ford F350 Super Duty diesel truck to the next level with this 6-inch 4-Link lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your dually Ford truck up right with clearance for up to 38 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arm conversion, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003e4-Link Conversion\u003c\/p\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eT-Case Indexing\u003c\/p\u003e\n\u003cp\u003eAt this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eDually Models Only\u003c\/li\u003e\n\u003cli\u003eThe transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.\u003c\/li\u003e\n\u003cli\u003eIf equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402).\u003c\/li\u003e\n\u003cli\u003e38 x 13.50 Tires may require minor trimming.\u003c\/li\u003e\n\u003cli\u003eThe indexing ring is not designed for manual shift transfer case models. Modification of the shift cable mount will be required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 38 x 13.5 Wheel Diameter: 20 x 10 Back Spacing: 5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013526, 2017-2020 F350 Dually 5 inch Block Kit, UPC Code 658848613632\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013601, 2017-2022 Super Duty 4-Link Box Kit 1of2, UPC Code 658848613700\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013604, 2017-2022 Ford F-250 \/ F-350 6 inch 4-Link Box Kit 2of2, UPC Code 658848613731\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033611, 2005-2022 Ford F250\/F350 6 inch (Diesel) Coil Kit, UPC Code 658848616589\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123605, 2017-2022 SD T-Case Indexing Kit- Diesel, UPC Code 711745604377\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224750, Fox 2.0 Shock 28.25 x 17.15 x 2- S50\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"NX2 Nitro Series","offer_id":50755543335200,"sku":"BDS1574H","price":2417.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Performance Series","offer_id":50755543302432,"sku":"BDS1574FS","price":3017.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50755543367968,"sku":"BDS2218FPE","price":5749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-6-inch-lift-kit-w-4-link-2020-2022-powerstroke-drw-4wd-4139709.jpg?v=1779549674"},{"product_id":"7-inch-lift-kit-w-radius-arm-ford-f350-super-duty-drw-20-22-4wd-diesel-fox-2-0-performance-shocks","title":"BDS Suspension 7 Inch Lift Kit w\/ Radius Arm (2020-2022 6.7L Powerstroke DRW, 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eTake your Ford F350 Dually InchDRW Inch Super Duty diesel truck to the next level with this 7-inch radius arm lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38 Inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003eT-Case Indexing\u003c\/p\u003e\n\u003cp\u003eAt this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final right height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eDually Models Only\u003c\/li\u003e\n\u003cli\u003eThe transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.\u003c\/li\u003e\n\u003cli\u003eIf equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402).\u003c\/li\u003e\n\u003cli\u003e38 x 13.50 Tires may require minor trimming.\u003c\/li\u003e\n\u003cli\u003eThe indexing ring is not designed for manual shift transfer case models. Modification of the shift cable mount will be required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 38 x 13.5 Wheel Diameter: 20 x 10 Back Spacing: 5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013526, 2017-2020 F350 Dually 5 Inch Block Kit, UPC Code 658848613632\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013603, 2020-2022 F250\/F350 6 Inch RA Front Box Suspension System, UPC Code 658848613724\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033611, 2005-2022 Ford F250\/F350 6 Inch (Diesel) Coil Kit, UPC Code 658848616589\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123605, 2017-2022 SD T-Case Indexing Kit- Diesel, UPC Code 711745604377\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224750, Fox 2.0 Shock 28.25 x 17.15 x 2- S50\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"NX2 Nitro Series","offer_id":50755532685600,"sku":"BDS1573H","price":2018.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Performance Series","offer_id":50755532652832,"sku":"BDS1573FS","price":2618.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50755532718368,"sku":"BDS2217FPE","price":5350.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-7-inch-lift-kit-w-radius-arm-2020-2022-powerstroke-drw-4wd-1148173.jpg?v=1779549674"},{"product_id":"7-inch-lift-kit-w-4-link-ford-f250-f350-super-duty-20-22-4wd-diesel-fox-2-0-performance-shocks","title":"BDS Suspension 7 Inch Lift Kit w\/ 4-Link (2020-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eTake your Ford Super Duty diesel truck to the next level with this 7-inch 4-Link lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arm conversion, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003e4-Link Conversion\u003c\/p\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eT-Case Indexing\u003c\/p\u003e\n\u003cp\u003eAt this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 7 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 6 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eFord recommends the replacement of the pitman arm nut after each time it has been removed.\u003c\/li\u003e\n\u003cli\u003eUse a small pitman arm puller to remove the drag link joint and steering stabilizer taper.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a factory rear sway bar add: BDS123808\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on the stock wheel are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and Tire fitment section.\u003c\/li\u003e\n\u003cli\u003eThe indexing ring is only compatible with 10-speed transmission trucks. Please verify your truck's equipment before installing it. The transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.\u003c\/li\u003e\n\u003cli\u003eIndexing Ring has NOT been designed to work on manual shift transfer case models. Modification of the shift cable mount will be required.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 38 x 13.5 Tire Size 2: 38 x 13.5 Wheel Diameter: 20 x 9 Wheel Diameter 2: 20 x 10 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013601, 2017-2022 Super Duty 4-Link Box Kit 1of2, UPC Code 658848613700\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013604, 2017-2022 Ford F-250 \/ F-350 6 inch 4-Link Box Kit 2of2, UPC Code 658848613731\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013606, 2020-2022 F250\/F350 6.25in Rear Box Suspension System, UPC Code 658848613748\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033611, 2005-2022 Ford F250\/F350 6 inch (Diesel) Coil Kit, UPC Code 658848616589\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123605, 2017-2022 SD T-Case Indexing Kit- Diesel, UPC Code 711745604377\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224750, Fox 2.0 Shock 28.25 x 17.15 x 2- S50\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"NX2 Nitro Series","offer_id":50755527672096,"sku":"BDS1571H","price":2438.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Performance Series","offer_id":50755527639328,"sku":"BDS1571FS","price":3038.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50755527704864,"sku":"BDS2215FPE","price":5770.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-7-inch-lift-kit-w-4-link-2020-2022-powerstroke-4wd-2112606.jpg?v=1779549674"},{"product_id":"5-inch-lift-kit-w-4-link-ford-f250-f350-super-duty-20-22-4wd-diesel-4-inch-block-fox-2-0-performance-shocks","title":"BDS Suspension 5 Inch Lift Kit w\/ 4-Link (2020-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eRaise the height of your Ford Super Duty diesel powered truck with this 5-inch lift kit and 4-Link conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, 4-link control arms with conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003e4-Link Conversion\u003c\/p\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eSteering Correction\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eFord recommends the replacement of the pitman arm nut after each time it has been removed.\u003c\/li\u003e\n\u003cli\u003eIf installed on a truck with a top-mounted overload spring, with an overload spacer block taller than 1-1\/8 inch UBT4027 (Qty: 4) is required.\u003c\/li\u003e\n\u003cli\u003eUse a small pitman arm puller to remove the drag link joint and steering stabilizer taper.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on the stock wheel are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and Tire fitment section.\u003c\/li\u003e\n\u003cli\u003eMinor trimming may be necessary for clearance of 37x12.50 Tires on certain wheel setups.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Lift Option\u003c\/strong\u003e \u003cstrong\u003e4 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded in the base system.\u003c\/li\u003e\n\u003cli\u003eMade of cast iron for high strength.\u003c\/li\u003e\n\u003cli\u003eDesigned to provide correct pinion angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013423, 2017-2022 Ford F-250 \/ F-350 4 Inch 4-Link Box Kit 2of2, UPC Code 658848613496\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013459, 2020-2022 F250\/F350 4.5 inch Rear Block Kit, UPC Code 658848613564\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013601, 2017-2022 Super Duty 4-Link Box Kit 1of2, UPC Code 658848613700\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033411, 2005-2024 Ford F250\/F350 Superduty 4 inch Coil Kit - Diesel, UPC Code 658848616527\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224700, Fox 2.0 Shock 25.65 x 16.05 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"4 inch Block Kit \/ NX2 Nitro Series","offer_id":50755503456544,"sku":"BDS1567H","price":2110.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50755503423776,"sku":"BDS1567FS","price":2710.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ FOX 2.5 Performance Elite","offer_id":50755503489312,"sku":"BDS1998FPE","price":5442.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ NX2 Nitro Series","offer_id":50755503554848,"sku":"BDS1569H","price":3074.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.0 Performance Series","offer_id":50755503522080,"sku":"BDS1569FS","price":3674.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.5 Performance Elite","offer_id":50755503587616,"sku":"BDS2213FPE","price":6406.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-5-inch-lift-kit-w-4-link-2020-2022-powerstroke-4wd-3593449.jpg?v=1779549675"},{"product_id":"4-inch-lift-kit-w-4-link-ford-f350-super-duty-drw-20-22-4wd-diesel-fox-2-0-performance-shocks","title":"BDS Suspension 4 Inch Lift Kit w\/ 4-Link (2020-2022 6.7L Powerstroke DRW, 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eRaise the height of your dual rear wheel Ford F350 Super Duty diesel powered truck with this 4-inch lift kit and 4-Link conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, 4-link control arms with conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003e4-Link Conversion\u003c\/p\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1\/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eSteering Correction\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 4 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 3 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eRemoval of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.\u003c\/li\u003e\n\u003cli\u003eIf equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)\u003c\/li\u003e\n\u003cli\u003eTorque wrench capable of 405 ft-lbs required.\u003c\/li\u003e\n\u003cli\u003e37 x 12.50 Tires may require minor trimming.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013317, 2020-2022 Ford F-250\/F-350 3In Rear Box Kit, UPC Code 658848613281\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013423, 2017-2022 Ford F-250 \/ F-350 4 Inch 4-Link Box Kit 2of2, UPC Code 658848613496\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013601, 2017-2022 Super Duty 4-Link Box Kit 1of2, UPC Code 658848613700\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033411, 2005-2024 Ford F250\/F350 Superduty 4 inch Coil Kit - Diesel, UPC Code 658848616527\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224700, Fox 2.0 Shock 25.65 x 16.05 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"NX2 Nitro Series","offer_id":50753252196640,"sku":"BDS1565H","price":2062.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Performance Series","offer_id":50753252163872,"sku":"BDS1565FS","price":2662.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50753252229408,"sku":"BDS1996FPE","price":5394.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4-inch-lift-kit-w-4-link-2020-2022-powerstroke-drw-4wd-8848224.jpg?v=1779549673"},{"product_id":"4-inch-lift-kit-w-4-link-fox-2-5-performance-elite-coil-over-conversion-ford-f350-super-duty-drw-20-22-4wd-diesel","title":"BDS Suspension 4 Inch Lift Kit w\/ 4-Link FOX 2.5 Coil-Over Conversion (2020-2022 6.7L Powerstroke DRW, 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eMaximize the capability of your dual rear wheel Ford F350 Super Duty diesel powered truck with this 4-inch lift kit with 4-Link and FOX 2.5 Performance Elite Coil-over conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your dually truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, 4-link control arms with conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003e4-Link Conversion\u003c\/p\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength Р РІР‚в„ўР РЋРїС—Р…-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eSteering Correction\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 4 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eRemoval of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.\u003c\/li\u003e\n\u003cli\u003eIf equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)\u003c\/li\u003e\n\u003cli\u003eTorque wrench capable of 405 ft-lbs required.\u003c\/li\u003e\n\u003cli\u003e37 x 12.50 Tires may require minor trimming.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAuxiliary Front and Rear Shock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013317, 2020-2022 Ford F-250\/F-350 3In Rear Box Kit, UPC Code 658848613281\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013423, 2017-2022 Ford F-250 \/ F-350 4 Inch 4-Link Box Kit 2of2, UPC Code 658848613496\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013601, 2017-2022 Super Duty 4-Link Box Kit 1of2, UPC Code 658848613700\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406427, Kit: BDS 2005-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 4 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224700, Fox 2.0 Shock 25.65 x 16.05 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":50753239449888,"sku":"BDS1565FPE","price":4982.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50753239482656,"sku":"BDS1974FPE","price":7714.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4-inch-lift-kit-w-4-link-fox-25-performance-elite-coil-over-conversion-2020-2022-powerstroke-drw-4wd-8915134.jpg?v=1779549672"},{"product_id":"4-inch-lift-kit-w-radius-arm-ford-f350-super-duty-drw-20-22-4wd-diesel-fox-2-0-performance-shocks","title":"BDS Suspension 4 Inch Lift Kit w\/ Radius Arm (2020-2022 6.7L Powerstroke 4WD, DRW)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eImprove the ride on your Ford F350 Dually Super Duty diesel truck with this 4-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your dually truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eSteering Correction\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 4 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 3 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eRemoval of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.\u003c\/li\u003e\n\u003cli\u003eIf equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)\u003c\/li\u003e\n\u003cli\u003eTorque wrench capable of 405 ft-lbs required.\u003c\/li\u003e\n\u003cli\u003e37 x 12.50 Tires may require minor trimming.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013317, 2020-2022 Ford F-250\/F-350 3In Rear Box Kit, UPC Code 658848613281\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013414, 2017-2024 Super Duty 4 inch Front Box Kit, UPC Code 658848613458\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033411, 2005-2024 Ford F250\/F350 Superduty 4 inch Coil Kit - Diesel, UPC Code 658848616527\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224700, Fox 2.0 Shock 25.65 x 16.05 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"NX2 Nitro Series","offer_id":50753222246688,"sku":"BDS1563H","price":1670.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Performance Series","offer_id":50753222213920,"sku":"BDS1563FS","price":2270.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50753222279456,"sku":"BDS1994FPE","price":5002.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4-inch-lift-kit-w-radius-arm-2020-2022-powerstroke-4wd-drw-9136496.jpg?v=1779549673"},{"product_id":"4-inch-lift-kit-w-radius-arm-fox-2-5-performance-elite-coil-over-conversion-ford-f350-super-duty-drw-20-22-4wd-diesel","title":"BDS Suspension 4 Inch Lift Kit w\/ Radius Arm FOX 2.5 Coil-Over Conversion (2020-2022 6.7L Powerstroke DRW 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eBuilt to outperform, upgrade your Ford F350 Dually Super Duty diesel powered truck with this 4-inch radius arm lift kit and FOX 2.5 Performance Elite Coil-over conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your dually truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, heavy duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003eSteering Correction\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 4 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eRemoval of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.\u003c\/li\u003e\n\u003cli\u003eIf equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)\u003c\/li\u003e\n\u003cli\u003eTorque wrench capable of 405 ft-lbs required.\u003c\/li\u003e\n\u003cli\u003e37 x 12.50 Tires may require minor trimming.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013317, 2020-2022 Ford F-250\/F-350 3In Rear Box Kit, UPC Code 658848613281\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013414, 2017-2024 Super Duty 4 inch Front Box Kit, UPC Code 658848613458\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406427, Kit: BDS 2005-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 4 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224700, Fox 2.0 Shock 25.65 x 16.05 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":50753211498784,"sku":"BDS1563FPE","price":4590.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50753211531552,"sku":"BDS1971FPE","price":7322.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4-inch-lift-kit-w-radius-arm-fox-25-performance-elite-coil-over-conversion-2020-2022-powerstroke-drw-4wd-7992220.jpg?v=1779549672"},{"product_id":"7-inch-lift-kit-w-radius-arm-ford-f250-f350-super-duty-20-22-4wd-diesel-6-inch-block-kit-fox-2-0-performance-shocks","title":"BDS Suspension 7 Inch Lift Kit w\/ Radius Arm (2020-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eTake your Ford Super Duty diesel truck to the next level with this 7-inch radius arm lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003eT-Case Indexing\u003c\/p\u003e\n\u003cp\u003eAt this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 7 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 6 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eFord recommends the replacement of the pitman arm nut after each time it has been removed.\u003c\/li\u003e\n\u003cli\u003eUse a small pitman arm puller to remove the drag link joint and steering stabilizer taper.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a factory rear sway bar add: BDS123808\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on the stock wheels are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and Tire fitment section.\u003c\/li\u003e\n\u003cli\u003eThe indexing ring is only compatible with 10-speed transmission trucks. Please verify your truck's equipment before installing it. The transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.\u003c\/li\u003e\n\u003cli\u003eIndexing Ring has NOT been designed to work on manual shift transfer case models. Modification of the shift cable mount will be required.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Lift Option\u003c\/strong\u003e \u003cstrong\u003e6 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded in the base system.\u003c\/li\u003e\n\u003cli\u003eMade of cast iron for high strength.\u003c\/li\u003e\n\u003cli\u003eDesigned to provide correct pinion angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 38 x 13.5 Tire Size 2: 38 x 13.5 Wheel Diameter: 18 x 10 Wheel Diameter 2: 20 x 10 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013603, 2020-2022 F250\/F350 6 inch RA Front Box Suspension System, UPC Code 658848613724\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013606, 2020-2022 F250\/F350 6.25in Rear Box Suspension System, UPC Code 658848613748\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033611, 2005-2022 Ford F250\/F350 6 inch (Diesel) Coil Kit, UPC Code 658848616589\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123605, 2017-2022 SD T-Case Indexing Kit- Diesel, UPC Code 711745604377\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224750, Fox 2.0 Shock 28.25 x 17.15 x 2- S50\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"6 inch Block Kit \/ NX2 Nitro Series","offer_id":50753201766688,"sku":"BDS1561H","price":2039.99,"currency_code":"USD","in_stock":true},{"title":"6 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50753201733920,"sku":"BDS1561FS","price":2639.99,"currency_code":"USD","in_stock":true},{"title":"6 inch Block Kit \/ FOX 2.5 Performance Elite","offer_id":50753201799456,"sku":"BDS1992FPE","price":5371.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ NX2 Nitro Series","offer_id":50753201864992,"sku":"BDS1562H","price":2968.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.0 Performance Series","offer_id":50753201832224,"sku":"BDS1562FS","price":3568.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.5 Performance Elite","offer_id":50753201897760,"sku":"BDS1993FPE","price":6300.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-7-inch-lift-kit-w-radius-arm-2020-2022-powerstroke-4wd-6089408.jpg?v=1779549674"},{"product_id":"5-inch-lift-kit-w-radius-arm-ford-f250-f350-super-duty-20-22-4wd-diesel-fox-2-0-performance-shocks","title":"BDS Suspension 5 Inch Lift Kit w\/ Radius Arm (2020-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eImprove the ride on your Ford Super Duty diesel truck with this 5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eSteering Correction\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eFord recommends the replacement of the pitman arm nut after each time it has been removed.\u003c\/li\u003e\n\u003cli\u003eIf installed on a truck with a top-mounted overload spring, an overload spacer block taller than 1-1\/8 inch UBT4027 (Qty: 4) is required.\u003c\/li\u003e\n\u003cli\u003eUse a small pitman arm puller to remove the drag link joint and steering stabilizer taper.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on the stock wheels are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and Tire fitment section.\u003c\/li\u003e\n\u003cli\u003eMinor trimming may be necessary for clearance of 37x12.50 Tires on certain wheel setups.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eShock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013414, 2017-2024 Super Duty 4 inch Front Box Kit, UPC Code 658848613458\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013459, 2020-2022 F250\/F350 4.5 inch Rear Block Kit, UPC Code 658848613564\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033411, 2005-2024 Ford F250\/F350 Superduty 4 inch Coil Kit - Diesel, UPC Code 658848616527\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224700, Fox 2.0 Shock 25.65 x 16.05 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"NX2 Nitro Series","offer_id":50753135804704,"sku":"BDS1551H","price":1718.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Performance Series","offer_id":50753135771936,"sku":"BDS1551FS","price":2318.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50753135837472,"sku":"BDS1991FPE","price":5050.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-5-inch-lift-kit-w-radius-arm-2020-2022-powerstroke-4wd-7388282.jpg?v=1779549672"},{"product_id":"5-inch-lift-kit-w-radius-arm-fox-2-5-performance-elite-coil-over-conversion-ford-f250-f350-super-duty-20-22-4wd-diesel","title":"BDS Suspension 5 Inch Lift Kit w\/ Radius Arm FOX 2.5 Coil-Over Conversion (2020-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eBuilt to outperform, upgrade your Ford Super Duty diesel powered truck with this 5-inch radius arm lift kit and FOX 2.5 Performance Elite Coil-over conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, heavy duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003eSteering Correction\u003c\/p\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 3 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eFord recommends the replacement of the pitman arm nut after each time it has been removed.\u003c\/li\u003e\n\u003cli\u003eIf installed on a truck with a top-mounted overload spring, an overload spacer block taller than 1-1\/8 inch UBT4027 (Qty: 4) is required.\u003c\/li\u003e\n\u003cli\u003eUse a small pitman arm puller to remove the drag link joint and steering stabilizer taper.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on the stock wheels are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and Tire fitment section.\u003c\/li\u003e\n\u003cli\u003eMinor trimming may be necessary for clearance of 37x12.50 Tires on certain wheel setups.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAuxiliary Front and Rear Shock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013414, 2017-2024 Super Duty 4 inch Front Box Kit, UPC Code 658848613458\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013459, 2020-2022 F250\/F350 4.5 inch Rear Block Kit, UPC Code 658848613564\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406427, Kit: BDS 2005-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 4 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224700, Fox 2.0 Shock 25.65 x 16.05 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224718, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":50753116602656,"sku":"BDS1551FPE","price":4638.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50753116635424,"sku":"BDS1968FPE","price":7370.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-5-inch-lift-kit-w-radius-arm-fox-25-performance-elite-coil-over-conversion-2020-2022-powerstroke-4wd-9558354.jpg?v=1779549671"},{"product_id":"3-inch-lift-kit-w-radius-arm-fox-2-5-performance-elite-coil-over-conversion-ford-f250-f350-super-duty-20-22-4wd-diesel","title":"BDS Suspension 3 Inch Lift Kit w\/ Radius Arm FOX 2.5 Coil-Over Conversion (2020-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eBuild the ultimate Ford Super Duty diesel powered truck with this 3-inch radius arm lift kit with FOX 2.5 Performance Elite coil-over shocks from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, heavy duty replacement radius arms, high strength 1-3\/8 inch solid steel track bar for steering correction, sway bar relocation, brake line brackets.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003eHD Adjustable Track Bar\u003c\/p\u003e\n\u003cp\u003eMaintain proper handling and steering geometry with the BDS high strength adjustable track bar that allows you to recenter the front axle at a variety of lift heights. Built from 1-3\/8 inch solid steel stock, the track bar comes pre-assembled with bushings and is ready to bolt into the factory mounting points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eDesigned for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1\/2 inch front ride height).\u003c\/li\u003e\n\u003cli\u003eLarger Tires on stock wheels are not recommended due to the brake line clearance required. Use recommended specifications listed in the Tire and wheel fitment section.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003cli\u003eTrucks without top-mounted overload springs require (x4) UBT4031 available to purchase separately.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eAdjustable solid steel track bar designed to recenter the front axle\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/55 hrs\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDesigned for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1\/2 inch front ride height).\u003c\/li\u003e\n\u003cli\u003eLarger Tires on stock wheels are not recommended due to the brake line clearance required. Use recommended specifications listed in the Tire and wheel fitment section.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003cli\u003eTrucks without top-mounted overload springs require (x4) UBT4031 available to purchase separately.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eModerate 30mm Socket, Die Grinder, Drill \/ Bit Set, Pitman Arm Puller, Reciprocating Saw\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013108, 2017-2024 F250\/F350 1 inchRear Block Kit, UPC Code 658848613052\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013261, 2020-2024 F250\/350 2.5 inch Front Box Kit, UPC Code 658848613236\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406426, Kit: BDS 2005-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 2.5 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224710, Fox 2.0 Shock 23.27 x 14.65 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224717, Fox 2.0 Shock 30.05 x 18.45 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":49659159904544,"sku":"BDS1549FPE","price":4625.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-3-inch-lift-kit-w-radius-arm-fox-25-performance-elite-coil-over-conversion-2020-2022-powerstroke-4wd-8411424.jpg?v=1779549670"},{"product_id":"fox-2-5-coil-over-conversion-upgrade-6-inch-lift-performance-elite-ford-f250-f350-super-duty-17-22-4wd-diesel","title":"BDS Suspension FOX 2.5 Coil-Over Conversion Upgrade 6 Inch Lift (2017-2026 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eBDS offers complete coilover conversion upgrade kits for your 2017-2022 Ford F250 and F350 Super Duty that make it effortless to convert your standard lifted suspension into coilovers.\u003c\/p\u003e\n\u003cp\u003eThese kits are equipped with heavy-duty brackets and FOX 2.5 Coilovers to withstand any rugged use and abuse you subject them to, taking your vehicle's performance to new heights. These upgrade kits are compatible with existing BDS 6-inch lift kits, allowing for seamless integration.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Overs\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Shocks\u003c\/li\u003e\n\u003cli\u003eLower Mount Type: No Lower Mount Type\u003c\/li\u003e\n\u003cli\u003eUpper Mount Type: No Upper Mount Type\u003c\/li\u003e\n\u003cli\u003eGas Charged: No Gas Charged\u003c\/li\u003e\n\u003cli\u003eAdjustable: true\u003c\/li\u003e\n\u003cli\u003eAdjustable Dampening: No Adjustable Dampening\u003c\/li\u003e\n\u003cli\u003eCompressed Length: No Compressed Length\u003c\/li\u003e\n\u003cli\u003eTravel Length: No Travel Length\u003c\/li\u003e\n\u003cli\u003eExtended Length: No Extended Length\u003c\/li\u003e\n\u003cli\u003eShaft Diameter: No Shaft Diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003cli\u003e2.5-inch smooth bore zinc plated seamless steel body\u003c\/li\u003e\n\u003cli\u003eZinc-plated and double-clear coated for long lasting finish\u003c\/li\u003e\n\u003cli\u003eBlack-anodized, CNC-machined 6061-T6 billet aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApplication specific valving to maximize performance\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406428, Kit: BDS 05-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 6 Inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":49659164492064,"sku":"BDS1531FPE","price":2534.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-fox-25-coil-over-conversion-upgrade-6-inch-lift-2017-2022-powerstroke-4wd-1325222.jpg?v=1779549668"},{"product_id":"fox-2-5-coil-over-conversion-upgrade-4-inch-lift-performance-elite-ford-f250-f350-super-duty-17-22-4wd-diesel","title":"BDS Suspension FOX 2.5 Coil-Over Conversion Upgrade 4 Inch Lift (2017-2026 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eBDS offers complete coilover conversion upgrade kits for your 2017-2022 Ford F250 and F350 Super Duty that make it effortless to convert your standard lifted suspension into coilovers. These kits are equipped with heavy-duty brackets and FOX 2.5 Coilovers to withstand any rugged use and abuse you subject them to, taking your vehicle's performance to new heights.\u003c\/p\u003e\n\u003cp\u003eThese upgrade kits are compatible with existing BDS 4-inch lift kits, allowing for seamless integration.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Overs\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Shocks\u003c\/li\u003e\n\u003cli\u003eLower Mount Type: No Lower Mount Type\u003c\/li\u003e\n\u003cli\u003eUpper Mount Type: No Upper Mount Type\u003c\/li\u003e\n\u003cli\u003eGas Charged: No Gas Charged\u003c\/li\u003e\n\u003cli\u003eAdjustable: false\u003c\/li\u003e\n\u003cli\u003eAdjustable Dampening: No Adjustable Dampening\u003c\/li\u003e\n\u003cli\u003eCompressed Length: No Compressed Length\u003c\/li\u003e\n\u003cli\u003eTravel Length: No Travel Length\u003c\/li\u003e\n\u003cli\u003eExtended Length: No Extended Length\u003c\/li\u003e\n\u003cli\u003eShaft Diameter: No Shaft Diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003cli\u003e2.5-inch smooth bore zinc plated seamless steel body\u003c\/li\u003e\n\u003cli\u003eZinc-plated and double-clear coated for long lasting finish\u003c\/li\u003e\n\u003cli\u003eBlack-anodized, CNC-machined 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eApplication specific valving to maximize performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406427, Kit: BDS 2005-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 4 Inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":49659164721440,"sku":"BDS1530FPE","price":2534.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-fox-25-coil-over-conversion-upgrade-4-inch-lift-2017-2022-powerstroke-4wd-7062006.jpg?v=1779549668"},{"product_id":"3-inch-lift-kit-w-radius-arm-ford-f250-f350-super-duty-20-22-4wd-diesel-fox-2-0-performance-elite","title":"BDS Suspension 3 Inch Lift Kit w\/ Radius Arm (2020-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eLevel out and take your Ford Super Duty diesel powered truck with this 3-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty replacement radius arms, high strength 1-3\/8 inch solid steel track bar for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003cp\u003eHD Adjustable Track Bar\u003c\/p\u003e\n\u003cp\u003eMaintain proper handling and steering geometry with the BDS high strength adjustable track bar that allows you to recenter the front axle at a variety of lift heights. Built from 1-3\/8 inch solid steel stock, the track bar comes pre-assembled with bushings and is ready to bolt into the factory mounting points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eDesigned for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1\/2 inch front ride height).\u003c\/li\u003e\n\u003cli\u003eLarger Tires on stock wheels are not recommended due to the brake line clearance required. Use recommended specifications listed in the Tire and wheel fitment section.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003cli\u003eTrucks without top-mounted overload springs require (x4) UBT4031 available to purchase separately.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs ride smooth through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eAdjustable solid steel track bar designed to recenter the front axle\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eShock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013108, 2017-2024 F250\/F350 1 inchRear Block Kit, UPC Code 658848613052\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013261, 2020-2024 F250\/350 2.5 inch Front Box Kit, UPC Code 658848613236\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS033251, 2005-2024 Ford Super Duty 2.5 inch Coil Spring Box Kit, Front Diesel, Pair, UPC Code 658848616480\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326096, Kit: 2017-2024 Ford SD Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 0-1.5 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326097, Kit: 2017-2024 Ford SD Front, 2.5 Truck Fox Performance Elite Series, R\/R, 2-3.5 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"NX2 Nitro Series","offer_id":50746640892192,"sku":"BDS1549H","price":1711.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Performance Series","offer_id":50746640826656,"sku":"BDS1549FS","price":2271.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50746640859424,"sku":"BDS1989FPE","price":5043.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-3-inch-lift-kit-w-radius-arm-2020-2022-powerstroke-7583269.jpg?v=1779549607"},{"product_id":"7-inch-lift-kit-w-radius-arm-fox-2-5-performance-elite-coil-over-conversion-ford-f250-f350-super-duty-20-22-4wd-diesel","title":"BDS Suspension 7 Inch Lift Kit w\/ Radius Arm FOX 2.5 Coil-Over Conversion (2020-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eBuilt to Outperform, take your Ford Super Duty diesel truck to the next level with this 7-inch radius arm lift kit with FOX 2.5 Performance Elite Coil-over shocks from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes FOX 2.5 coil-over shocks, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003eT-Case Indexing\u003c\/p\u003e\n\u003cp\u003eAt this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Leaf Spring\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 7 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 6 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eFord recommends the replacement of the pitman arm nut after each time it has been removed.\u003c\/li\u003e\n\u003cli\u003eUse a small pitman arm puller to remove the drag link joint and steering stabilizer taper.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a factory rear sway bar add: BDS123808\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on the stock wheels are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and Tire fitment section.\u003c\/li\u003e\n\u003cli\u003eThe indexing ring is only compatible with 10-speed transmission trucks. Please verify your truck's equipment before installing it. The transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.\u003c\/li\u003e\n\u003cli\u003eIndexing Ring has NOT been designed to work on manual shift transfer case models. Modification of the shift cable mount will be required.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Lift Option\u003c\/strong\u003e \u003cstrong\u003eBlock Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded in the base system.\u003c\/li\u003e\n\u003cli\u003eMade of cast iron for high strength.\u003c\/li\u003e\n\u003cli\u003eDesigned to provide correct pinion angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLeaf Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates any need for a lift block.\u003c\/li\u003e\n\u003cli\u003eReduces axle wrap and creates a more controlled and stable feel.\u003c\/li\u003e\n\u003cli\u003eMulti-leaf progressive design for a smooth ride.\u003c\/li\u003e\n\u003cli\u003eMaintains factory payload weight ratings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 38 x 13.5 Tire Size 2: 38 x 13.5 Wheel Diameter: 18 x 10 Wheel Diameter 2: 20 x 10 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAuxiliary Front and Rear Shock Option\u003c\/strong\u003e FOX 2.0 Performance Series\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes two BDS003639, 2017-2024 Super Duty 6 inch Rear Leaf Spring, UPC Code 658848611409\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013603, 2020-2022 F250\/F350 6 inch RA Front Box Suspension System, UPC Code 658848613724\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013617, 2017-2022 Super Duty Rear Leaf Spring Box Kit, UPC Code 658848613823\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123605, 2017-2022 SD T-Case Indexing Kit- Diesel, UPC Code 711745604377\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326099, Kit: 2017-2023 Ford SD Front, 2.5 Truck Fox Performance Elite Series, R\/R, 4-6 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326100, Kit: 2017-2024 Ford SD Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 4-6 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406428, Kit: BDS 05-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 6 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Block Kit \/ FOX 2.0 Performance Series","offer_id":50746519585056,"sku":"BDS1561FPE","price":4937.99,"currency_code":"USD","in_stock":true},{"title":"Block Kit \/ FOX 2.5 Performance Elite","offer_id":50746519617824,"sku":"BDS1980FPE","price":7669.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.0 Performance Series","offer_id":50746519650592,"sku":"BDS1562FPE","price":5866.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.5 Performance Elite","offer_id":51880421851424,"sku":"BDS1981FPE","price":8598.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-7-inch-lift-kit-w-radius-arm-fox-25-performance-elite-coil-over-conversion-2020-2022-powerstroke-6394397.jpg?v=1779549552"},{"product_id":"9-inch-inch-lift-kit-w-4-link-fox-2-5-performance-elite-coil-over-conversion-ford-f250-f350-super-duty-20-22-4wd-diesel","title":"BDS Suspension 9 inch Inch Lift Kit w\/ 4-Link FOX 2.5 Coil-Over Conversion (202-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eGo to new heights with your 2020-2022 Ford F250 and F350 Super Duty diesel truck by installing this 9-inch 4-Link lift kit with FOX 2.5 Performance Elite coil-over shocks from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 40 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific FOX 2.5 coil-overs, 4-Link control arm conversion, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned FOX nitrogen charged secondary shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes full replacement BDS Glideride leaf springs, u-bolts, brake line brackets and a matching set of FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003e4-Link Conversion\u003c\/p\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1\/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eT-Case Indexing\u003c\/p\u003e\n\u003cp\u003eAt this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle.\u003c\/p\u003e\n\u003cp\u003eAdditionally, a high clearance transmission crossmember supplied to allow sufficient clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Leaf Spring\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 9 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 8 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eThe transfer case indexing ring is designed for diesel models only and will not fit gas models equipped with the 6R100 transmission.\u003c\/li\u003e\n\u003cli\u003eIf equipped with a 2-piece rear driveshaft, a carrier-bearing drop kit may be required (BDS123402)\u003c\/li\u003e\n\u003cli\u003e40x13.50 Tires WILL require trimming.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a factory rear sway bar add BDS123009\u003c\/li\u003e\n\u003cli\u003eThe indexing ring is not designed for manual shift transfer case models. Modification of the shift cable mount will be required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eGlideride leaf springs to provide full lift height and increased capacity with a built in overload spring\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 40 x 13.5 Wheel Diameter: 20 x 10 Back Spacing: 512 hrs\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe transfer case indexing ring is designed for diesel models only and will not fit gas models equipped with the 6R100 transmission.\u003c\/li\u003e\n\u003cli\u003eIf equipped with a 2-piece rear driveshaft, a carrier-bearing drop kit may be required (BDS123402)\u003c\/li\u003e\n\u003cli\u003e40x13.50 Tires WILL require trimming.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a factory rear sway bar add BDS123009\u003c\/li\u003e\n\u003cli\u003eThe indexing ring is not designed for manual shift transfer case models. Modification of the shift cable mount will be required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eGlideride leaf springs to provide full lift height and increased capacity with a built in overload spring\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall Time:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes two BDS003839, 2017 F250\/F350 8 inch Rear Leaf Spring, UPC Code 658848611447\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013601, 2017-2022 Super Duty 4-Link Box Kit 1of2, UPC Code 658848613700\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013801, 2017 Super Duty 8 inch Front Box Kit, UPC Code 658848613830\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013809, 2017 Super Duty 8 inch Rear Box Kit, UPC Code 658848613847\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123805, 2020-2022 Ford Superduty 8 inch Transfer Case Indexing Ring Kit, UPC Code 711745612181\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406429, Kit: BDS 05-ON Ford SD, Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, 8 inchРЎСљ Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224721, Fox 2.0 Shock - 27.95 x 17.35 x 2- Special\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224779, Fox 2.0 Shock 35.95 x 21.85 x 2-EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":49659187593504,"sku":"BDS1959FPE","price":6780.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-9-inch-inch-lift-kit-w-4-link-fox-25-performance-elite-coil-over-conversion-202-2022-powerstroke-9240432.jpg?v=1779549550"},{"product_id":"6-inch-lift-kit-w-radius-arm-fox-2-5-performance-elite-coil-over-conversion-ford-f350-super-duty-drw-20-22-4wd-diesel-fox-2-5-performance-elite","title":"BDS Suspension 6 Inch Lift Kit w\/ Radius Arm FOX 2.5 Coil-Over Conversion (2020-2022 6.7L Powerstroke DRW, 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eBuilt to Outperform, take your dual rear wheel Ford F350 Super Duty diesel truck to the next level with this 6-inch radius arm lift kit with FOX 2.5 Performance Elite Coil-over shocks from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your dually truck up right with clearance for up to 38 Inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes FOX 2.5 coil-over shocks, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and secondary FOX 2.0 shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Radius Arms\u003c\/p\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003cp\u003eT-Case Indexing\u003c\/p\u003e\n\u003cp\u003eAt this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final right height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eDually Models Only\u003c\/li\u003e\n\u003cli\u003eThe transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.\u003c\/li\u003e\n\u003cli\u003eIf equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402).\u003c\/li\u003e\n\u003cli\u003e38 x 13.50 Tires may require minor trimming.\u003c\/li\u003e\n\u003cli\u003eThe indexing ring is not designed for manual shift transfer case models. Modification of the shift cable mount will be required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAuxiliary Front and Rear Shock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 38 x 13.5 Wheel Diameter: 20 x 10 Back Spacing: 5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013526, 2017-2020 F350 Dually 5 Inch Block Kit, UPC Code 658848613632\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013603, 2020-2022 F250\/F350 6 Inch RA Front Box Suspension System, UPC Code 658848613724\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123251, 2005-2022 Ford F250\/F350 Radius Arm Kit, Pair, UPC Code 711745604087\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123605, 2017-2022 SD T-Case Indexing Kit- Diesel, UPC Code 711745604377\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326099, Kit: 2017-2023 Ford SD Front, 2.5 Truck Fox Performance Elite Series, R\/R, 4-6 Inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326100, Kit: 2017-2024 Ford SD Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 4-6 Inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406428, Kit: BDS 05-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 6 Inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":51901232873760,"sku":"BDS1573FPE","price":4916.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":51901232906528,"sku":"BDS1982FPE","price":7648.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-drw-6-inch-lift-kit-w-radius-arm-fox-25-performance-elite-coil-over-conversion-2020-2022-powerstroke-3789309.webp?v=1779549546"},{"product_id":"7-inch-lift-kit-w-4-link-fox-2-5-performance-elite-coil-over-conversion-ford-f250-f350-super-duty-20-22-4wd-diesel-block-kit","title":"BDS Suspension 7 Inch Lift Kit w\/ 4-Link (2020-2022 6.7L Powerstroke 4WD)","description":"\u003ch3 class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/h3\u003e\n\u003cp\u003eRaise the bar on your Ford Super Duty diesel truck with this 7-inch 4-Link lift kit and FOX Performance Elite coil-over conversion from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes FOX 2.5 coil-over shocks and mounting brackets, 4-Link control arm conversion, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.\u003c\/p\u003e\n\u003cp\u003e4-Link Conversion\u003c\/p\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite Coil-Over\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eT-Case Indexing\u003c\/p\u003e\n\u003cp\u003eAt this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Leaf Spring\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 7 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 6 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eFord recommends the replacement of the pitman arm nut after each time it has been removed.\u003c\/li\u003e\n\u003cli\u003eUse a small pitman arm puller to remove the drag link joint and steering stabilizer taper.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a factory rear sway bar add: BDS123808\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger Tires on the stock wheel are not recommended due to the brake line clearance required.\u003c\/li\u003e\n\u003cli\u003eThe indexing ring is only compatible with 10-speed transmission trucks. Please verify your truck's equipment before installing it. The transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.\u003c\/li\u003e\n\u003cli\u003eIndexing Ring has NOT been designed to work on manual shift transfer case models. Modification of the shift cable mount will be required.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 405 ft-lbs.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coil-Over mounts in factory coil bucket location\u003c\/li\u003e\n\u003cli\u003eAdds additional secondary FOX 2.0 shock for max performance\u003c\/li\u003e\n\u003cli\u003eEibach coil springs ride smooth through the roughest terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Lift Option\u003c\/strong\u003e \u003cstrong\u003e5 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded in the base system.\u003c\/li\u003e\n\u003cli\u003eMade of cast iron for high strength.\u003c\/li\u003e\n\u003cli\u003eDesigned to provide correct pinion angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 38 x 13.5 Tire Size 2: 38 x 13.5 Wheel Diameter: 20 x 9 Wheel Diameter 2: 20 x 10 Back Spacing: 5\/5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAuxiliary Front and Rear Shock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFOX 2.0 Performance Series\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013601, 2017-2022 Super Duty 4-Link Box Kit 1of2, UPC Code 658848613700\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013604, 2017-2022 Ford F-250 \/ F-350 6 Inch 4-Link Box Kit 2of2, UPC Code 658848613731\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS013606, 2020-2022 F250\/F350 6.25in Rear Box Suspension System, UPC Code 658848613748\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123605, 2017-2022 SD T-Case Indexing Kit- Diesel, UPC Code 711745604377\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123613, 2017-2024 Super Duty Coil-over Mount Kit, UPC Code 711745604407\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS85431, 2017-2024 F250\/F350 Single Stabilizer, UPC Code 711745609242\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326099, Kit: 2017-2023 Ford SD Front, 2.5 Truck Fox Performance Elite Series, R\/R, 4-6 Inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326100, Kit: 2017-2024 Ford SD Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 4-6 Inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406428, Kit: BDS 05-On Ford SD Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R 6 Inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Block Kit \/ FOX 2.0 Performance Series","offer_id":50731259035936,"sku":"BDS1571FPE","price":5336.99,"currency_code":"USD","in_stock":true},{"title":"Block Kit \/ FOX 2.5 Performance Elite","offer_id":50731259068704,"sku":"BDS1985FPE","price":8068.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.0 Performance Series","offer_id":50731259101472,"sku":"BDS1572FPE","price":6265.99,"currency_code":"USD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.5 Performance Elite","offer_id":50731259134240,"sku":"BDS1986FPE","price":8997.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-7-inch-lift-kit-w-4-link-2020-2022-powerstroke-3671568.jpg?v=1779549492"},{"product_id":"spe-motorsport-s300106-fixed-caster-kit-for-2005-2024-power-stroke","title":"SPE Motorsport S300106 Fixed Caster Kit For (2005-2024 6.0\/6.4\/6.7L PowerStroke)","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured from 303 stainless steel, this caster camber kit is a game changer for your 2005-2024 Super Duty F250\/F350. Competitors use cast materials that simply don’t measure up when it comes to strength and durability. With a +2 degree caster adjustment, this kit gives you the flexibility to correct alignment on lifted or modified suspensions, ensuring your truck tracks straight and performs with precision. This kit was designed specifically to use with the \u003c\/span\u003e\u003ca href=\"https:\/\/www.spemotorsport.com\/search?q=Lift%20Suspension%20Kit*\"\u003e\u003cspan\u003eSPE Motorsport lift kits\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003e\u003cstrong\u003ePrecise 303 Billet Stainless –\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eEngineered for durability and strength, this kit’s billet stainless construction outperforms cast alternatives, handling tough conditions with ease. They wont rust and seize.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003e+2 Degree Caster Adjustment –\u003c\/strong\u003e\u003cspan\u003eCorrect alignment issues effectively with this +2-degree caster feature, ensuring smoother handling and enhanced stability.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003e\u003cstrong\u003eSimple Installation –\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eDirect-fit design seamlessly integrates with the\u003c\/span\u003e\u003ca href=\"https:\/\/www.spemotorsport.com\/search?q=Lift%20Suspension%20Kit*\"\u003e\u003cspan\u003eSPE Motorsport lift kits\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eVEHICLE COMPATIBILITY:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e2005-2024 Ford SuperDuty F-250\/F-350 SINGLE CAB (all engine configurations)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003e2005-2024 Ford SuperDuty F-250\/F-350 EXTENDED CAB (all engine configurations)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e2005-2024 Ford SuperDuty F-250\/F-350 CREW CAB (all engine configurations)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPE Motorsport","offers":[{"title":"Default Title","offer_id":50923969413408,"sku":"S300106","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/spe-motorsport-s300106-fixed-caster-kit-for-2005-2024-power-stroke-7027446.webp?v=1779545293"}],"url":"https:\/\/www.southerndieselsupply.com\/collections\/ford-2020-2024-6-7l-powerstroke-lift-kits.oembed","provider":"Southern Diesel Supply","version":"1.0","type":"link"}