{"title":"Ford, (2018-2021), 3.0L, Suspension, Lift Kit","description":"","products":[{"product_id":"4-inch-lift-kit-fox-2-5-performance-elite-coil-over-ford-f150-15-20-4wd","title":"BDS Suspension 4 Inch Lift Kit FOX 2.5 Performance Elite Coil-Over (2018-2020 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eMaximize the performance and capability of the 2015-2020 Ford F150 trucks with 4-inch coil-over suspension lift kits. These kits feature proprietary FOX Performance Elite 2.5 coil-over shocks designed specifically to bolt-on performance for increase travel and the ability to soak up the roughest terrain along with smooth on-road comfort. This kit includes everything necessary to set your F150 truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front the kit utilizes FOX 2.5 remote reservoir coil-over shocks, high-arched 1\/4-inch thick steel crossmembers, multipiece differential relocation brackets and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along with perfectly tuned FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 4 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch total backspacing should be test fit prior to mounting the Tire to ensure proper clearance to BDS steering knuckle.\u003c\/li\u003e\n\u003cli\u003e18 inch or larger diameter wheels are required. Stock 17 inch and 18 inch wheels cannot be reinstalled. Stock 20 inch wheels can be used with up to a 305\/60-20 Tires.\u003c\/li\u003e\n\u003cli\u003eThe 4 inch blocks will net a level\/tail LOW stance. The 5 inch blocks will net a level\/tail HIGH stance.\u003c\/li\u003e\n\u003cli\u003eWill not fit HD models (7 lug).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 coil-over shocks designed specifically for increase travel and the ability to soak up the roughest terrain\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs\u003c\/li\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Shock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Wheel Diameter: 20 x 9 Back Spacing: 5.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013439, 2015-2020 Ford F150 4 inch Rear Block Kit, UPC Code 658848613557\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023634, 2015-2020 Ford F150 Knuckle Box Kit - DS, UPC Code 658848615919\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023635, 2015-2020 Ford F150 Knuckle Box Kit - PS, UPC Code 658848615926\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023650, 2015-2020 Ford F150 Front Box Kit (1of2), UPC Code 658848615940\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023651, 2015-2020 Ford F150 Front Box Kit (2of2), UPC Code 658848615957\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406325, Kit: BDS 2015-2024 Ford F150, Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, 4 inchРЎСљ Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88426025, Kit: BDS 2015-2024 Ford F150, Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 4 inch-6 inch Lift Heights\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":50756926341408,"sku":"BDS1533FPE","price":4493.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance ElIte","offer_id":50756926374176,"sku":"BDS1590FPE","price":5543.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4-inch-lift-kit-fox-25-performance-elite-coil-over-2018-2020-30l-powerstroke-4wd-5602575.jpg?v=1779549727"},{"product_id":"3-inch-lift-kit-fox-2-5-performance-elite-coil-over-ford-f150-14-20-4wd","title":"BDS Suspension 3 Inch Lift Kit FOX 2.5 Performance Elite Coil-Over (2018-2020 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eUp the ante in your 2014-2020 Ford F150 truck with style and performance by installing this 3-inch lift kit featuring FOX Performance Elite 2.5 coil-over shocks from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes FOX 2.5 Performance Elite Series remote reservoir coil-over shocks and heavy duty tubular upper control arms for increased strength. In the rear this kit utilizes a complementary set of FOX 2.0 Performance shocks for the smoothest ride.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms (UCAs)\u003c\/p\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability.\u003c\/p\u003e\n\u003cp\u003eArms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Stock\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 0 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eWorks with bar pin lower strut mounts. For eye style lower strut mounts use 2009-13 model kits.\u003c\/li\u003e\n\u003cli\u003eWill not fit HD models (7 lug).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 coil-over shocks designed specifically for increase travel and the ability to soak up the roughest terrain\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs\u003c\/li\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013204, 2014-2020 Ford F150 Coilover 2 inch-3 inch Box kit, UPC Code 658848613113\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406317, Kit: BDS, 14-On F-150 4wd Front Coilover 2.5 PEF Series, R\/R 5.5 inch 0-3 inch Lift, Dual Speed Compression Adjust, UPC Code 814897013506\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224651, Fox 2.0 Shock 27.95 x 17.35 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":50756882268448,"sku":"BDS1588FPE","price":3392.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50756882301216,"sku":"BDS1589FPE","price":4592.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-3-inch-lift-kit-fox-25-performance-elite-coil-over-2018-2020-30l-powerstroke-4wd-8486838.jpg?v=1779549726"},{"product_id":"4-inch-lift-kit-fox-2-0-strut-ford-f150-21-24-4wd-2-inch-block-fox-2-0-performance-shocks","title":"BDS Suspension 4 Inch Lift Kit FOX 2.0 Strut (2021 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eIncrease the performance and capability of the 2021-2024 Ford F150 trucks with 4-inch lift kit with FOX 2.0 struts by BDS Suspension. Designed to improve stance the BDS 4 inch lift kit with FOX 2.0 front struts give more capability off-road. This kit includes everything necessary to set your F150 truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front the kit utilizes FOX 2.0 strut shocks, high-arched 1\/4-inch thick steel crossmembers, multipiece differential relocation brackets and skidplate designed for offroad protection.\u003c\/p\u003e\n\u003cp\u003eSteering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along and NX2 Nitro or optional FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eFOX 2.0 Struts\u003c\/p\u003e\n\u003cp\u003eThese FOX 2.0 Performance Series coil-over struts bring impressive damper performance for great ride on and offroad capability designed as a direct bolt-in replacement for the factory strut assemblies while retaining the OE coil spring and top plate.\u003c\/p\u003e\n\u003cp\u003eThey feature a 2.0 inch extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (Internal Floating Piston) to eliminate oil aeration, FOX's proprietary internals, 5\/8 inch hard chrome plated heat-treated alloy shaft.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 4 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e18 inch or larger diameter wheels required. Stock 17 inch and 18 inch wheels cannot be re-installed. Stock 20 inch wheels can be used with up to a 305\/60R20 Tire.\u003c\/li\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch backspacing should be test fit prior to mounting the Tire to ensure proper clearance to the steering knuckle\/tie rod. 5.5 inch backspacing is highly recommended for Tire to frame crash bar clearance.\u003c\/li\u003e\n\u003cli\u003eModels with 2-piece rear driveshaft WILL require carrier bearing shim kit 122406 (not included w\/ kit)\u003c\/li\u003e\n\u003cli\u003eBlock kits replace factory 1-1\/4 inch block. Stock block will not be reinstalled.\u003c\/li\u003e\n\u003cli\u003eCrash bars may require modification based on wheel and Tire choice. It is the end users responsibility to ensure modifications are non-detrimental to vehicle safety.\u003c\/li\u003e\n\u003cli\u003eDoes NOT fit diesel models.\u003c\/li\u003e\n\u003cli\u003eTremor models: only the 3-1\/4 inch rear block is recommended. Larger blocks cause driveline vibration. Expected rake is 1 inchwith new block installed. Factory block provides slight tail low stance if desired\u003c\/li\u003e\n\u003cli\u003eSome trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, BDS recommends to have this performed prior to installing the lift.\u003c\/li\u003e\n\u003cli\u003eThis system has not been tested on models equipped with Ford BlueCruise.\u003c\/li\u003e\n\u003cli\u003eWill not work with models with CCD (Continuous Controlled Damping)\u003c\/li\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.0 Performance Internal Floating Piston shocks eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving\u003c\/li\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRear Lift Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel to tail high appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Wheel Diameter: 20 x 9 Back Spacing: 5.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013437, 2021-2024 Ford F150 3 inch Rear Box Kit, UPC Code 658848613533\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023652, 2021-2024 Ford F150 Front Box Kit (1of2), UPC Code 658848615964\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023653, 2021-2024 Ford F150 Front Box Kit (2of2), UPC Code 658848615971\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023670, 2021-2024 Ford F150 Knuckle Box Kit - DS, UPC Code 658848616053\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023671, 2021-2024 Ford F150 Knuckle Box Kit - PS, UPC Code 658848616060\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224828, Fox 2.0 Shock 31.02 x 18.95 x 2- EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98662001, BDS, 2014-2024 Ford F-150, Front Coilover, Snap Ring, PS, 2.0, Internal Floating Piston, 6.1 inch, 4 \u0026amp; 6 inch Lift\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"2 inch Block Kit","offer_id":50756827021600,"sku":"BDS1902FSR","price":2608.99,"currency_code":"USD","in_stock":true},{"title":"3 inch Block Kit","offer_id":50756826988832,"sku":"BDS1583FSR","price":2608.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4-inch-lift-kit-fox-20-strut-2021-30l-powerstroke-4wd-8555781.jpg?v=1779549726"},{"product_id":"4-inch-lift-kit-ford-f150-21-24-4wd-3-inch-block-fox-2-0-performance-shocks","title":"BDS Suspension 4 Inch Lift Kit (2021 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eBDS steps up the performance and capability of the 2021-2024 Ford F150 trucks with 4-inch suspension lift kits. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics. Up front the kit utilizes high-arched 1\/4-inch thick steel crossmembers, multipiece differential relocation brackets and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along and NX2 Nitro or optional FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 4 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e18 inch or larger diameter wheels are required. Stock 17 inch and 18 inch wheels cannot be re-installed. Stock 20 inch wheels can be used with up to a 305\/60R20 Tire.\u003c\/li\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch backspacing should be test fit prior to mounting the Tire to ensure proper clearance to the steering knuckle\/tie rod. 5.5 inch backspacing is highly recommended for Tire-to-frame crash bar clearance.\u003c\/li\u003e\n\u003cli\u003eModels with 2-piece rear driveshaft WILL require carrier bearing shim kit 122406 (not included w\/ kit)\u003c\/li\u003e\n\u003cli\u003eBlock kits replace factory 1-1\/4 inch block. The stock block will not be reinstalled.\u003c\/li\u003e\n\u003cli\u003eCrash bars may require modification based on wheel and Tire choice. It is the end user's responsibility to ensure modifications are non-detrimental to vehicle safety.\u003c\/li\u003e\n\u003cli\u003eDoes NOT fit diesel models.\u003c\/li\u003e\n\u003cli\u003eWill not work with Tremor models.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003cli\u003eThis system has not been tested on models equipped with Ford BlueCruise.\u003c\/li\u003e\n\u003cli\u003eWill not work with models with CCD (Continuous Controlled Damping)\u003c\/li\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRear Lift Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel to tail high appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Wheel Diameter: 20 x 9 Back Spacing: 5.75\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013437, 2021-2024 Ford F150 3 inch Rear Box Kit, UPC Code 658848613533\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023414, 2021-2024 Ford F150 4 inch Spacer Box Kit, UPC Code 658848615711\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023652, 2021-2024 Ford F150 Front Box Kit (1of2), UPC Code 658848615964\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023653, 2021-2024 Ford F150 Front Box Kit (2of2), UPC Code 658848615971\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023670, 2021-2024 Ford F150 Knuckle Box Kit - DS, UPC Code 658848616053\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023671, 2021-2024 Ford F150 Knuckle Box Kit - PS, UPC Code 658848616060\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224828, Fox 2.0 Shock 31.02 x 18.95 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"3 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50756768891168,"sku":"BDS1583FS","price":2246.99,"currency_code":"USD","in_stock":true},{"title":"3 inch Block Kit \/ NX2 Nitro Series","offer_id":50756768923936,"sku":"BDS1583H","price":1946.99,"currency_code":"USD","in_stock":true},{"title":"2 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50756768956704,"sku":"BDS1902FS","price":2246.99,"currency_code":"USD","in_stock":true},{"title":"2 inch Block Kit \/ NX2 Nitro Series","offer_id":50756768989472,"sku":"BDS1902H","price":1946.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4-inch-lift-kit-2021-30l-powerstroke-4wd-1638388.jpg?v=1779549727"},{"product_id":"4-inch-lift-kit-fox-2-5-performance-elite-coil-over-ford-f150-21-24-4wd-3-inch-block","title":"BDS Suspension 4 Inch Lift Kit FOX 2.5 Performance Elite Coil-Over (2021 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eMaximize the performance and capability of the 2021-2024 Ford F150 trucks with 4-inch coil-over suspension lift kits. These kits feature proprietary FOX Performance Elite 2.5 coil-over shocks designed specifically to bolt-on performance for increase travel and the ability to soak up the roughest terrain along with smooth on-road comfort.\u003c\/p\u003e\n\u003cp\u003eThis kit Includes everything necessary to set your F150 truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front the kit utilizes FOX 2.5 remote reservoir coil-over shocks, high-arched 1\/4-inch thick steel crossmembers, multipiece differential relocation brackets and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along with perfectly tuned FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 4 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e18 inch or larger diameter wheels are required. Stock 17 inch and 18 inch wheels cannot be re-installed. Stock 20 inch wheels can be used with up to a 305\/60R20 Tire.\u003c\/li\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch backspacing should be test fit prior to mounting the Tire to ensure proper clearance to the steering knuckle\/tie rod. 5.5 inch backspacing is highly recommended for Tire-to-frame crash bar clearance.\u003c\/li\u003e\n\u003cli\u003eModels with 2-piece rear driveshaft WILL require carrier bearing shim kit 122406 (not included w\/ kit)\u003c\/li\u003e\n\u003cli\u003eBlock kits replace factory 1-1\/4 inch block. The stock block will not be reinstalled.\u003c\/li\u003e\n\u003cli\u003eCrash bars may require modification based on wheel and Tire choice. It is the end user's responsibility to ensure modifications are non-detrimental to vehicle safety.\u003c\/li\u003e\n\u003cli\u003eDoes NOT fit diesel models.\u003c\/li\u003e\n\u003cli\u003eWill not work with Tremor models.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003cli\u003eThis system has not been tested on models equipped with Ford BlueCruise.\u003c\/li\u003e\n\u003cli\u003eWill not work with models with CCD (Continuous Controlled Damping)\u003c\/li\u003e\n\u003cli\u003e3 inchРЎСљ Block kit recommended for a more level stance, 2 inchРЎСљ block kit will result in a tail low stance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 coil-over shocks designed specifically for increase travel and the ability to soak up the roughest terrain\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs\u003c\/li\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRear Lift Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel to tail high appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Wheel Diameter: 20 x 9 Back Spacing: 5.75\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013437, 2021-2024 Ford F150 3 inch Rear Box Kit, UPC Code 658848613533\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023652, 2021-2024 Ford F150 Front Box Kit (1of2), UPC Code 658848615964\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023653, 2021-2024 Ford F150 Front Box Kit (2of2), UPC Code 658848615971\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023670, 2021-2024 Ford F150 Knuckle Box Kit - DS, UPC Code 658848616053\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023671, 2021-2024 Ford F150 Knuckle Box Kit - PS, UPC Code 658848616060\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406325, Kit: BDS 2015-2024 Ford F150, Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, 4 inchРЎСљ Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224828, Fox 2.0 Shock 31.02 x 18.95 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"3 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50756742873376,"sku":"BDS1583FPE","price":4388.99,"currency_code":"USD","in_stock":true},{"title":"3 inch Block Kit \/ FOX 2.5 Performance Elite","offer_id":50756742906144,"sku":"BDS1584FPE","price":5438.99,"currency_code":"USD","in_stock":true},{"title":"2 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50756742938912,"sku":"BDS1902FPE","price":4388.99,"currency_code":"USD","in_stock":true},{"title":"2 inch Block Kit \/ FOX 2.5 Performance Elite","offer_id":50756742971680,"sku":"BDS1903FPE","price":5588.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4-inch-lift-kit-fox-25-performance-elite-coil-over-2021-30l-powerstroke-4wd-2446149.jpg?v=1779549727"},{"product_id":"6-inch-lift-kit-fox-2-0-strut-ford-f150-21-24-4wd-4-inch-block-kit-fox-2-0-performance-shocks","title":"BDS Suspension 6 Inch Lift Kit FOX 2.0 Strut (2021 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eIncrease the performance and capability of the 2021-2024 Ford F150 trucks with 6-inch lift kit with FOX 2.0 struts by BDS Suspension. Designed to improve stance the BDS 6 inch lift kit with FOX 2.0 front struts give more capability off-road.\u003c\/p\u003e\n\u003cp\u003eThis kit includes everything necessary to set your F150 truck up right with clearance for up to 37 inch tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front the kit utilizes FOX 2.0 strut shocks, high-arched 1\/4-inch thick steel crossmembers, multipiece differential relocation brackets and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles.\u003c\/p\u003e\n\u003cp\u003eThese combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along and NX2 Nitro or optional FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eFOX 2.0 Struts\u003cbr\u003eThese FOX 2.0 Performance Series coil-over struts bring impressive damper performance for great ride on and offroad capability designed as a direct bolt-in replacement for the factory strut assemblies while retaining the OE coil spring and top plate.\u003c\/p\u003e\n\u003cp\u003eThey feature a 2.0 inch extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX's proprietary internals, 5\/8 inch hard chrome plated heat-treated alloy shaft.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003cbr\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003cbr\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.0 Performance IFP shocks eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving\u003c\/li\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(Trimming may be required)\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 with 18 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 with 20 x 9 and 4.5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 with 20 x 9 and 5.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Lift Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Inch Block Kit\u003c\/li\u003e\n\u003cli\u003eLevel to tail high appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013538, 2021-2024 Ford F150 5 inch Rear Box Kit, UPC Code 658848613663\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023652, 2021-2024 Ford F150 Front Box Kit (1of2), UPC Code 658848615964\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023653, 2021-2024 Ford F150 Front Box Kit (2of2), UPC Code 658848615971\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023670, 2021-2024 Ford F150 Knuckle Box Kit - DS, UPC Code 658848616053\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023671, 2021-2024 Ford F150 Knuckle Box Kit - PS, UPC Code 658848616060\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224760, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98662001, BDS, 2014-2024 Ford F-150, Front Coilover, Snap Ring, PS, 2.0, Internal Floating Piston, 6.1 inch, 4 \u0026amp; 6 inch Lift\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"5 inch Block Kit","offer_id":50756409098528,"sku":"BDS1579FSR","price":2660.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit","offer_id":50756409131296,"sku":"BDS1900FSR","price":2660.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-6-inch-lift-kit-fox-20-strut-2021-30l-powerstroke-4wd-3255835.jpg?v=1779549727"},{"product_id":"6-inch-lift-kit-ford-f150-21-24-4wd-5-inch-block-fox-2-0-performance-shocks","title":"BDS Suspension 6 Inch Lift Kit (2021 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eBDS steps up the performance and capability of the 2021-2024 Ford F150 trucks with 6-inch suspension lift kits. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics. Up front the kit utilizes high-arched 1\/4-inch thick steel crossmembers, top mounted strut spacers, multipiece differential relocation brackets and skidplate designed for offroad protection.\u003c\/p\u003e\n\u003cp\u003eSteering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along and NX2 Nitro or optional FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e18 inch or larger diameter wheels are required. Stock 17 inch and 18 inch wheels cannot be re-installed. Stock 20 inch wheels can be used with up to a 305\/60R20 Tire.\u003c\/li\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch backspacing should be test fit prior to mounting the Tire to ensure proper clearance to the steering knuckle\/tie rod. 5.5 inch backspacing is highly recommended for Tire-to-frame crash bar clearance.\u003c\/li\u003e\n\u003cli\u003eModels with 2-piece rear driveshaft WILL require carrier bearing shim kit 122406 (not included w\/ kit)\u003c\/li\u003e\n\u003cli\u003eBlock kits replace factory 1-1\/4 inch block. The stock block will not be reinstalled.\u003c\/li\u003e\n\u003cli\u003eCrash bars may require modification based on wheel and Tire choice. It is the end user's responsibility to ensure modifications are non-detrimental to vehicle safety.\u003c\/li\u003e\n\u003cli\u003eDoes NOT fit diesel models.\u003c\/li\u003e\n\u003cli\u003eWill not work with Tremor models.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003cli\u003eThis system has not been tested on models equipped with Ford BlueCruise.\u003c\/li\u003e\n\u003cli\u003eWill not work with models with CCD (Continuous Controlled Damping)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRear Lift Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel to tail high appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 20 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 4.5\/5.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013538, 2021-2024 Ford F150 5 inch Rear Box Kit, UPC Code 658848613663\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023652, 2021-2024 Ford F150 Front Box Kit (1of2), UPC Code 658848615964\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023653, 2021-2024 Ford F150 Front Box Kit (2of2), UPC Code 658848615971\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023654, 2021-2024 Ford F150 6 inch Spacer Box Kit, UPC Code 658848615988\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023670, 2021-2024 Ford F150 Knuckle Box Kit - DS, UPC Code 658848616053\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023671, 2021-2024 Ford F150 Knuckle Box Kit - PS, UPC Code 658848616060\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224760, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"5 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50756388585760,"sku":"BDS1579FS","price":2298.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit \/ NX2 Nitro Series","offer_id":50756388618528,"sku":"BDS1579H","price":1998.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50756388651296,"sku":"BDS1900FS","price":2298.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ NX2 Nitro Series","offer_id":50756388684064,"sku":"BDS1900H","price":1998.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-6-inch-lift-kit-2021-30l-powerstroke-4wd-3290949.jpg?v=1779549728"},{"product_id":"6-inch-lift-kit-fox-2-5-performance-elite-coil-over-ford-f150-21-24-4wd-5-inch-block-fox-2-0-performance-elite-shocks","title":"BDS Suspension 6 Inch Lift Kit FOX 2.5 Performance Elite Coil-Over (2021 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eMaximize the performance and capability of the 2021-2024 Ford F150 trucks with 6-inch coil-over suspension lift kits. These kits feature proprietary FOX Performance Elite 2.5 coil-over shocks designed specifically to bolt-on performance for increase travel and the ability to soak up the roughest terrain along with smooth on-road comfort.\u003c\/p\u003e\n\u003cp\u003eThis kit Includes everything necessary to set your F150 truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics. Up front the kit utilizes FOX 2.5 remote reservoir coil-over shocks, high-arched 1\/4-inch thick steel crossmembers, multipiece differential relocation brackets and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along with perfectly tuned FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e18 inch or larger diameter wheels are required. Stock 17 inch and 18 inch wheels cannot be re-installed. Stock 20 inch wheels can be used with up to a 305\/60R20 Tire.\u003c\/li\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch backspacing should be test fit prior to mounting the Tire to ensure proper clearance to the steering knuckle\/tie rod. 5.5 inch backspacing is highly recommended for Tire-to-frame crash bar clearance.\u003c\/li\u003e\n\u003cli\u003eModels with 2-piece rear driveshaft WILL require carrier bearing shim kit 122406 (not included w\/ kit)\u003c\/li\u003e\n\u003cli\u003eBlock kits replace factory 1-1\/4 inch block. The stock block will not be reinstalled.\u003c\/li\u003e\n\u003cli\u003eCrash bars may require modification based on wheel and Tire choice. It is the end user's responsibility to ensure modifications are non-detrimental to vehicle safety.\u003c\/li\u003e\n\u003cli\u003eDoes NOT fit diesel models.\u003c\/li\u003e\n\u003cli\u003eWill not work with Tremor models.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.\u003c\/li\u003e\n\u003cli\u003eThis system has not been tested on models equipped with Ford BlueCruise.\u003c\/li\u003e\n\u003cli\u003eWill not work with models with CCD (Continuous Controlled Damping)\u003c\/li\u003e\n\u003cli\u003e5 inch Block kit recommended for a more level stance, 4 inch block kit will result in a tail low stance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 coil-over shocks designed specifically for increase travel and the ability to soak up the roughest terrain\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs\u003c\/li\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRear Lift Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel to tail high appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 20 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 4.5\/5.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013538, 2021-2024 Ford F150 5 inch Rear Box Kit, UPC Code 658848613663\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023652, 2021-2024 Ford F150 Front Box Kit (1of2), UPC Code 658848615964\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023653, 2021-2024 Ford F150 Front Box Kit (2of2), UPC Code 658848615971\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023670, 2021-2024 Ford F150 Knuckle Box Kit - DS, UPC Code 658848616053\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023671, 2021-2024 Ford F150 Knuckle Box Kit - PS, UPC Code 658848616060\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406327, Kit: BDS 2015-2024 Ford F150, Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, 6 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224760, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"5 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50756376658208,"sku":"BDS1579FPE","price":4440.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit \/ FOX 2.5 Performance Elite","offer_id":50756376690976,"sku":"BDS1585FPE","price":5490.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50756376723744,"sku":"BDS1900FPE","price":4440.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ FOX 2.5 Performance Elite","offer_id":50756376756512,"sku":"BDS1901FPE","price":5490.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-6-inch-lift-kit-fox-25-performance-elite-coil-over-2021-30l-powerstroke-4wd-8003451.jpg?v=1779549728"},{"product_id":"2-inch-lift-kit-fox-2-0-strut-ford-f150-14-20-4wd-fox-2-0-performance-shocks","title":"BDS Suspension 2 Inch Lift Kit FOX 2.0 Strut (2015-2020 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eBuilt to outperform, upgrade your 2014-2020 Ford F150 truck with this 2-inch leveling kit featuring FOX 2.0 Snap Ring Struts from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes FOX 2.0 Performance Series strut shocks and heavy duty tubular upper control arms for increased strength. In the rear this kit utilizes a matching set of FOX 2.0 Performance shocks for the smoothest ride.\u003c\/p\u003e\n\u003cp\u003eFOX 2.0 Snap Ring Strut\u003c\/p\u003e\n\u003cp\u003eThe mono-tube design's internal reservoir separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The Internal Floating Piston eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving.\u003c\/p\u003e\n\u003cp\u003eA custom-molded spring seat allows the use of your stock spring and mounting hardware. The precision, impact-extruded 2-inch aluminum body is lightweight and rust resistant. Three predetermined preload settings allow a choice of 0-, 1- or 2-inches of lift.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms\u003c\/p\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability.\u003c\/p\u003e\n\u003cp\u003eArms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Stock\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 2 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 0 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eWorks with bar pin lower strut mounts. For eye style lower strut mounts use 2009-13 model kits.\u003c\/li\u003e\n\u003cli\u003eWill not fit HD models (7 lug).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX Performance Internal Floating Piston shocks eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving\u003c\/li\u003e\n\u003cli\u003eHD Upper control arms provide superior strength and proper alignment\u003c\/li\u003e\n\u003cli\u003eAdjustable height to fine tune\u003c\/li\u003e\n\u003cli\u003eProvides level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eEasy, 100 percent Bolt On installation\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eWorks with bar pin lower strut mounts. For eye style lower strut mounts use 2009-13 model kits.\u003c\/li\u003e\n\u003cli\u003eWill not fit HD models (7 lug).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX Performance Internal Floating Piston shocks eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving\u003c\/li\u003e\n\u003cli\u003eHD Upper control arms provide superior strength and proper alignment\u003c\/li\u003e\n\u003cli\u003eAdjustable height to fine tune\u003c\/li\u003e\n\u003cli\u003eProvides level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eEasy, 100 percent Bolt On installation\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS123253, 2004-2020 F150 Upper Control Arm Box Kit, UPC Code 711745604100\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224651, Fox 2.0 Shock 27.95 x 17.35 x 2- EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98562009, 15-20 Ford F150 4WD, Front C\/O, Snap Ring, PS, 2.0, Internal Floating Piston, 5.6 inch, 0-2 inch Lift\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":49659159052576,"sku":"BDS1553FSR","price":1800.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-2-inch-lift-kit-fox-20-strut-2015-2020-30l-powerstroke-4wd-3666745.jpg?v=1779549671"},{"product_id":"2-inch-lift-kit-fox-2-0-coil-over-ford-f150-14-20-4wd","title":"BDS Suspension 2 Inch Lift Kit FOX 2.0 Coil-Over (2015-2020 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eLevel out your 2014-2020 Ford F150 truck and improve the ride with this 2-inch leveling kit featuring FOX 2.0 coil-over shocks from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes FOX 2.0 Performance Series coil-over shocks and heavy duty tubular upper control arms for increased strength. In the rear this kit utilizes a matching set of FOX 2.0 Performance shocks for the smoothest ride.\u003c\/p\u003e\n\u003cp\u003eFOX 2.0 Coil-Over Shocks\u003c\/p\u003e\n\u003cp\u003eThese FOX 2.0 Performance Series coil-overs bring impressive damper performance for great ride on and offroad capability designed as a direct bolt-in replacement for the factory strut. They feature a 2.0 inch extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (Internal Floating Piston) to eliminate oil aeration, FOX's proprietary internals, 5\/8 inch hard chrome plated heat treated alloy shaft and come preloaded with springs and top-plate for easy installation.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms\u003c\/p\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Stock\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 2 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 0 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eWorks with bar pin lower strut mounts. For eye style lower strut mounts use 2009-13 model kits.\u003c\/li\u003e\n\u003cli\u003eWill not fit HD models (7 lug).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX Performance Internal Floating Piston shocks eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving\u003c\/li\u003e\n\u003cli\u003eHD Upper control arms provide superior strength and proper alignment\u003c\/li\u003e\n\u003cli\u003eAdjustable height to fine tune\u003c\/li\u003e\n\u003cli\u003eProvides level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eEasy, 100 percent Bolt On installation\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS123253, 2004-2020 F150 Upper Control Arm Box Kit, UPC Code 711745604100\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224651, Fox 2.0 Shock 27.95 x 17.35 x 2- EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98502015, 14-ON Ford F150 4wd Front Coilover, PS, 2.0, Internal Floating Piston, 4.9 inch, 0-2 inch Lift, UPC Code 714686858779\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":49659159085344,"sku":"BDS1553FSL","price":2430.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-2-inch-lift-kit-fox-20-coil-over-2015-2020-30l-powerstroke-4wd-7462928.jpg?v=1779549671"},{"product_id":"4-inch-lift-kit-ford-f150-15-20-4wd-4-inch-block-kit-fox-2-0-performance-shocks","title":"BDS Suspension 4 Inch Lift Kit (2015-2020 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eBDS steps up the performance and capability of the 2015-2020 Ford F150 4WD trucks with 4-inch suspension lift kits. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics. Up front the kit utilizes high-arched 1\/4-inch thick steel crossmembers, multipiece differential relocation brackets and skidplate designed for offroad protection.\u003c\/p\u003e\n\u003cp\u003eSteering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along and NX2 Nitro or optional FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 4 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch total backspacing should be test fir prior to mounting Tire to ensure proper clearance to BDS steering knuckle.\u003c\/li\u003e\n\u003cli\u003e18 inch or larger diameter wheels required. Stock 17 inch and 18 inch wheels cannot be reinstalled. Stock 20 inch wheels can be used with up to a 305\/60-20 Tires.\u003c\/li\u003e\n\u003cli\u003eE-brake bracket required for factory powersteps (123018)\u003c\/li\u003e\n\u003cli\u003eBlock kits replace factory 1-1\/4 inch block.\u003c\/li\u003e\n\u003cli\u003eModels with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122406\u003c\/li\u003e\n\u003cli\u003eWill not fit HD models (7 lug).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRear Lift Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel to tail high appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Wheel Diameter: 20 x 9 Back Spacing: 5.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear Shock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013439, 2015-2020 Ford F150 4 inch Rear Block Kit, UPC Code 658848613557\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023404, 2014-2020 Ford F150 4 Inch Spacer Box Kit, UPC Code 658848615636\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023634, 2015-2020 Ford F150 Knuckle Box Kit - DS, UPC Code 658848615919\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023635, 2015-2020 Ford F150 Knuckle Box Kit - PS, UPC Code 658848615926\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023650, 2015-2020 Ford F150 Front Box Kit (1of2), UPC Code 658848615940\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023651, 2015-2020 Ford F150 Front Box Kit (2of2), UPC Code 658848615957\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224828, Fox 2.0 Shock 31.02 x 18.95 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"4 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50752979009824,"sku":"BDS1533FS","price":2343.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ NX2 Nitro Series","offer_id":50752979042592,"sku":"BDS1533H","price":2043.99,"currency_code":"USD","in_stock":true},{"title":"3 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50752979075360,"sku":"BDS1908FS","price":2331.99,"currency_code":"USD","in_stock":true},{"title":"3 inch Block Kit \/ NX2 Nitro Series","offer_id":50752979108128,"sku":"BDS1908H","price":2031.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4-inch-lift-kit-2015-2020-30l-powerstroke-4wd-3165078.jpg?v=1779549671"},{"product_id":"6-inch-lift-kit-ford-f150-15-20-4wd-5-inch-block-kit-fox-2-0-performance-shocks","title":"BDS Suspension 6 Inch Lift Kit (2015-2020 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eTake your 2015-2020 Ford F150 4WD truck to new heights with a 6-inch suspension lift kit by BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front the kit utilizes high-arched 1\/4-inch thick steel crossmembers, top mounted strut spacers, multipiece differential relocation brackets and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles.\u003c\/p\u003e\n\u003cp\u003eThese combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along and NX2 Nitro or optional FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch total backspacing should be test fir prior to mounting Tire to ensure proper clearance to BDS steering knuckle.\u003c\/li\u003e\n\u003cli\u003e18 inch or larger diameter wheels required. Stock 17 inch and 18 inch wheels cannot be reinstalled. Stock 20 inch wheels can be used with up to a 305\/60-20 Tires.\u003c\/li\u003e\n\u003cli\u003eE-brake bracket required for factory powersteps (123018)\u003c\/li\u003e\n\u003cli\u003eBlock kits replace factory 1-1\/4 inch block.\u003c\/li\u003e\n\u003cli\u003eModels with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122406\u003c\/li\u003e\n\u003cli\u003eWill not fit HD models (7 lug).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRear Lift Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel to tail high appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013539, 2015-2020 Ford F150 Rear Box Kit, UPC Code 658848613670\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023605, 2014-15 F150 6 Inch Spacer Box Kit, UPC Code 658848615780\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023634, 2015-2020 Ford F150 Knuckle Box Kit - DS, UPC Code 658848615919\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023635, 2015-2020 Ford F150 Knuckle Box Kit - PS, UPC Code 658848615926\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023650, 2015-2020 Ford F150 Front Box Kit (1of2), UPC Code 658848615940\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023651, 2015-2020 Ford F150 Front Box Kit (2of2), UPC Code 658848615957\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224760, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"5 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50752961216800,"sku":"BDS1532FS","price":2356.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit \/ NX2 Nitro Series","offer_id":50752961249568,"sku":"BDS1532H","price":2056.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50752961282336,"sku":"BDS1922FS","price":2356.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ NX2 Nitro Series","offer_id":50752961315104,"sku":"BDS1922H","price":2056.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-6-inch-lift-kit-2015-2020-30l-powerstroke-4wd-2428845.jpg?v=1779549671"},{"product_id":"6-inch-lift-kit-fox-2-5-performance-elite-coil-over-ford-f150-15-20-4wd","title":"BDS Suspension 6 Inch Lift Kit FOX 2.5 Performance Elite Coil-Over (2015-2020 3.0L Powerstroke 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eMaximize the performance and capability of the 2015-2020 Ford F150 trucks with 6-inch coil-over suspension lift kits. These kits feature proprietary FOX Performance Elite 2.5 coil-over shocks designed specifically to bolt-on performance for increase travel and the ability to soak up the roughest terrain along with smooth on-road comfort. This kit includes everything necessary to set your F150 truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front the kit utilizes FOX 2.5 remote reservoir coil-over shocks, high-arched 1\/4-inch thick steel crossmembers, multipiece differential relocation brackets and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles.\u003c\/p\u003e\n\u003cp\u003eThese combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along with perfectly tuned FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch total backspacing should be tested before mounting to ensure proper clearance to BDS steering knuckle.\u003c\/li\u003e\n\u003cli\u003e18 inch or larger diameter wheels are required. Stock 17 inch and 18 inch wheels cannot be reinstalled. Stock 20 inch wheels can be used with up to 305\/60-20 Tires.\u003c\/li\u003e\n\u003cli\u003eThe 4 inch blocks will net a level\/tail LOW stance. The 5 inch blocks will net a level\/tail HIGH stance.\u003c\/li\u003e\n\u003cli\u003eModels with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122406\u003c\/li\u003e\n\u003cli\u003eThis system WILL WORK on Diesel Models.\u003c\/li\u003e\n\u003cli\u003eWill not fit HD models (7 lug).\u003c\/li\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 coil-over shocks designed specifically for increase travel and the ability to soak up the roughest terrain\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs\u003c\/li\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Shock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013539, 2015-2020 Ford F150 Rear Box Kit, UPC Code 658848613670\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023634, 2015-2020 Ford F150 Knuckle Box Kit - DS, UPC Code 658848615919\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023635, 2015-2020 Ford F150 Knuckle Box Kit - PS, UPC Code 658848615926\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023650, 2015-2020 Ford F150 Front Box Kit (1of2), UPC Code 658848615940\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023651, 2015-2020 Ford F150 Front Box Kit (2of2), UPC Code 658848615957\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406327, Kit: BDS 2015-2024 Ford F150, Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, 6 inchРЎСљ Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224760, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":50752926941472,"sku":"BDS1532FPE","price":4493.99,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":50752926974240,"sku":"BDS1591FPE","price":5543.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-6-inch-lift-kit-fox-25-performance-elite-coil-over-2015-2020-30l-powerstroke-4wd-2361069.jpg?v=1779549670"},{"product_id":"4-inch-lift-kit-ford-f150-15-20-2wd-4-inch-block-kit-fox-2-0-performance-shocks","title":"BDS Suspension 4 Inch Lift Kit (2015-2020 3.0L Powerstroke 2WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eImprove the performance and capability of your 2015-2020 Ford F150 2WD truck by installing a 4-inch suspension lift kit by BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front the kit utilizes high-arched 1\/4-inch thick steel crossmembers, and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles.\u003c\/p\u003e\n\u003cp\u003eThese combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along and NX2 Nitro or optional FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003cbr\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003cbr\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(Trimming may be required)\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 with 18 x 9 and 5.5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 with 20 x 9 and 5.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRear Lift Option\u003cbr\u003e\u003cstrong\u003e4 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel to tail high appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Shock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 4 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013429, 09-15 F150 4 inch Rear Block Kit, UPC Code 658848613519\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023404, 2014-2020 Ford F150 4 Inch Spacer Box Kit, UPC Code 658848615636\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023634, 2015-2020 Ford F150 Knuckle Box Kit - DS, UPC Code 658848615919\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023635, 2015-2020 Ford F150 Knuckle Box Kit - PS, UPC Code 658848615926\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023644, 2015-2020 Ford F150 2wd Box Kit, UPC Code 658848615933\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224828, Fox 2.0 Shock 31.02 x 18.95 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"4 inch Block \/ FOX 2.0 Performance Series","offer_id":50752749535520,"sku":"BDS1523FS","price":2077.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block \/ NX2 Nitro Series","offer_id":50752749568288,"sku":"BDS1523H","price":1777.99,"currency_code":"USD","in_stock":true},{"title":"3 inch Block \/ FOX 2.0 Performance Series","offer_id":50752749601056,"sku":"BDS1909FS","price":2065.99,"currency_code":"USD","in_stock":true},{"title":"3 inch Block \/ NX2 Nitro Series","offer_id":50752749633824,"sku":"BDS1909H","price":1765.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4-inch-lift-kit-2015-2020-30l-powerstroke-2wd-8608531.jpg?v=1779549613"},{"product_id":"6-inch-lift-kit-ford-f150-15-20-2wd-5-inch-block-fox-2-0-performance-shocks","title":"BDS Suspension 6 Inch Lift Kit (2015-2020 3.0L Powerstroke 2WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eBDS Suspension leads the industry by developing a 2wd specific 6 inch lift kit suspension system for your 2015-2020 Ford F150 2WD truck. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front the kit utilizes high-arched 1\/4-inch thick steel crossmembers, top mounted strut spacers, and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along and NX2 Nitro or optional FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmemebers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch total backspacing should be tested before mounting to ensure proper clearance to BDS steering knuckle.\u003c\/li\u003e\n\u003cli\u003e18 inch or larger diameter wheels are required. Stock 17 inch and 18 inch wheels cannot be reinstalled. Stock 20 inch wheels can be used with up to 305\/60-20 Tires.\u003c\/li\u003e\n\u003cli\u003eThe 4 inch blocks will net a level\/tail LOW stance. The 5 inch blocks will net a level\/tail HIGH stance.\u003c\/li\u003e\n\u003cli\u003eModels with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122406\u003c\/li\u003e\n\u003cli\u003eThis system WILL WORK on Diesel Models.\u003c\/li\u003e\n\u003cli\u003eWill not fit HD models (7 lug).\u003c\/li\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRear Lift Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5 Inch Block Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel to tail high appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5\/5.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear Shock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013529, 2009-2016 Ford F150 Rear Box Kit, UPC Code 658848613656\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023605, 2014-15 F150 6 Inch Spacer Box Kit, UPC Code 658848615780\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023634, 2015-2020 Ford F150 Knuckle Box Kit - DS, UPC Code 658848615919\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023635, 2015-2020 Ford F150 Knuckle Box Kit - PS, UPC Code 658848615926\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023644, 2015-2020 Ford F150 2wd Box Kit, UPC Code 658848615933\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224760, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"5 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50752717979936,"sku":"BDS1522FS","price":2090.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit \/ NX2 Nitro Series","offer_id":50752718012704,"sku":"BDS1522H","price":1790.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ FOX 2.0 Performance Series","offer_id":50752718045472,"sku":"BDS1918FS","price":2090.99,"currency_code":"USD","in_stock":true},{"title":"4 inch Block Kit \/ NX2 Nitro Series","offer_id":50752718078240,"sku":"BDS1918H","price":1790.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-6-inch-lift-kit-2015-2020-30l-powerstroke-2wd-3694107.jpg?v=1779549614"},{"product_id":"6-inch-lift-kit-ford-f150-21-24-4wd-ccd-equipped-bds-suspension","title":"BDS Suspension 4WD 6 Inch Lift Kit CCD Equipped (2019-2024 3.0L Powerstroke)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eBDS steps up the performance and capability of the 2021-2024 Ford F150 trucks factory equipped with CCD (Continuously Controlled Damping) with a 6-inch suspension lift kit. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front the kit utilizes high-arched 1\/4-inch thick steel crossmembers, top mounted strut spacers, multipiece differential relocation brackets and skidplate designed for offroad protection.\u003c\/p\u003e\n\u003cp\u003eSteering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along with shock relocation brackets to maintain the factory CCD shocks.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmembers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Blocks\u003c\/li\u003e\n\u003cli\u003eShocks Included: No\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eWill not work with an aftermarket Upper Control Arm kits that do not have provisions for both driver and passenger side ride height sensors.\u003c\/li\u003e\n\u003cli\u003e18 inch or larger diameter wheels required. Stock 17 inch and 18 inch wheels cannot be re-installed. Stock 20 inch wheels can be used with up to a 305\/60R20 Tire.\u003c\/li\u003e\n\u003cli\u003e18 inch wheels with 5-5.5 inch backspacing should be test fit prior to mounting the Tire to ensure proper clearance to the steering knuckle\/tie rod. 5.5 inch backspacing is highly recommended for Tire to frame crash bar clearance.\u003c\/li\u003e\n\u003cli\u003eModels with 2-piece rear driveshaft WILL require carrier bearing shim kit 122406 (not included w\/ kit)\u003c\/li\u003e\n\u003cli\u003eBlock replaces factory 1-1\/4 inch block. Stock block will not be reinstalled.\u003c\/li\u003e\n\u003cli\u003eCrash bars may require modification based on wheel and Tire choice. It is the end users responsibility to ensure modifications are non-detrimental to vehicle safety.\u003c\/li\u003e\n\u003cli\u003eDoes NOT fit diesel models.\u003c\/li\u003e\n\u003cli\u003eWill not work with Tremor models.\u003c\/li\u003e\n\u003cli\u003eSome trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, BDS recommends to have this performed prior to installing the lift.\u003c\/li\u003e\n\u003cli\u003eThis system has not been tested on models equipped with Ford BlueCruise.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003cli\u003eShock relocation brackets included to maintain CCD shock system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 20 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5.5\/4.58-10 hrs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013538, 2021-2024 Ford F150 5 inch Rear Box Kit, UPC Code 658848613663\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023645, 2021-2024 Ford F150 4wd 6 inch Strut Spacer Box Kit, CCD Only, UPC Code 711745606524\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023652, 2021-2024 Ford F150 Front Box Kit (1of2), UPC Code 658848615964\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023653, 2021-2024 Ford F150 Front Box Kit (2of2), UPC Code 658848615971\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023670, 2021-2024 Ford F150 Knuckle Box Kit - DS, UPC Code 658848616053\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS023671, 2021-2024 Ford F150 Knuckle Box Kit - PS, UPC Code 658848616060\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":49659193688352,"sku":"BDS1961H","price":1960.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-6-inch-lift-kit-ccd-equipped-2019-2024-30l-powerstroke-7952865.jpg?v=1779549549"}],"url":"https:\/\/www.southerndieselsupply.com\/collections\/ford-2018-2021-3-0l-suspension-lift-kit.oembed","provider":"Southern Diesel Supply","version":"1.0","type":"link"}