{"title":"Exergy Performance","description":"\u003ch2\u003eAbout Exergy Performance\u003c\/h2\u003e\n\u003cp\u003eExergy Performance builds high-pressure common-rail fuel-system parts for Cummins, Duramax and Powerstroke diesels. The line covers the whole high-pressure side: injectors, CP3 and CP4.2 pumps, fuel rails, rail pressure sensors, pressure relief valves and the fittings and seal kits that go with them. If you are chasing a rail-pressure problem or building more fuel into a truck, this is the brand we reach for on the high-pressure side.\u003c\/p\u003e\n\u003ch2\u003eWhat we carry\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePerformance injector sets\u003c\/li\u003e\n\u003cli\u003eCP3 and CP4.2 high-pressure pumps, including Sportsman and reverse-rotation CP3s and the CP4.2 for the 2011-2019 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003eFuel rails: new stock-replacement rails for the 2011-2019 6.7L Powerstroke and complete rails with sensor and PRV for the 2013-2018 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003eRail pressure sensors and pressure relief valves\u003c\/li\u003e\n\u003cli\u003eCP3 supply fittings, rear-outlet fitting and plug kits, rail plug kits and seal kits\u003c\/li\u003e\n\u003cli\u003eExergy diesel fuel additive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShop Exergy Performance by engine\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/cummins\"\u003eCummins\u003c\/a\u003e · \u003ca href=\"\/collections\/duramax\"\u003eDuramax\u003c\/a\u003e · \u003ca href=\"\/collections\/powerstroke\"\u003ePowerstroke\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNot sure it fits? Use the Fits-your-truck checker on any product page, or text your VIN to (352) 722-5295 and a tech at our Wildwood, FL shop will confirm it.\u003c\/p\u003e","products":[{"product_id":"2003-2004-early-5-9-cummins-reman-exergy-sportsman-fuel-injectors-set-of-6-e01-20102","title":"Exergy Performance REMAN Fuel Injectors Set (2003-2004 5.9L Cummins)","description":"\u003cdiv\u003eHave your original or aftermarket injectors left you stranded? Are you cautious to use your truck for what its intended for? Want to feel confident in making that long trip across country or hauling that heavy load for work? Well, look no further than our Sportsman line of fuel injectors! \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAt 10% over stock, these are an affordable upgrade for stock trucks and people looking for a slight increase in performance without worrying about smoke or heat issues.  No other vehicle modifications are required.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector.  All components are built and tested on specialized equipment designed and built in-house at Exergy. Every Sportsman injector set is tested at multiple calibration points, and held to tolerances that are tighter than factory.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll our Reman injectors are remanufactured by Bosch where all moving parts and wear surfaces are replaced. Very few parts are reused.  In our years of experience these reman injectors have not exhibited an increased reliability risk.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)! For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThese injectors can be used as a direct replacement for Bosch part numbers 0 445 120 018, 0 445 120 113, 0 445 120 210, 0 445 120 255, and 0 986 435 503, Cummins part numbers 3949619, 4940589, 5254686, 5263318, and 3949913, as well as Mopar part numbers R8004082AA, R8004082AB, R8004082AC, R5086894AA, and R8310748AA.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eCore Return:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eExergy requires that all cores be returned within 30 days from original purchase of product. If you fail to return the core(s) within 30 days, you will be charged in full for the core(s) ($150 per injector). Cores that have missing and\/or damaged component(s) will not receive credit. To avoid this, please package your cores well in an organized fashion with the Injector Process Form inserted (see examples and find Injector Process Form on the\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.exergyperformance.com\/ft-2433-shipping-returns.html\" title=\"Shipping and Returns\" target=\"_blank\"\u003eshipping and returns\u003c\/a\u003e page). If you have an outstanding circumstance, please contact us.\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Sportsman","offer_id":51914035495200,"sku":"E01 20102","price":2449.99,"currency_code":"USD","in_stock":true},{"title":"30 Percent Over","offer_id":51914035527968,"sku":"E01 20105","price":3169.99,"currency_code":"USD","in_stock":true},{"title":"45 Percent Over","offer_id":51914035560736,"sku":"E01 20106","price":3249.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":51914035593504,"sku":"E01 20107","price":3319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e01-20102-reman-exergy-sportsman-fuel-injectors-set-2003-2004-cummins-7403796.png?v=1779546186"},{"product_id":"2007-5-2012-early-6-7-cummins-exergy-sportsman-cp3-pump-6-7c-based-e04-20305","title":"Exergy Performance CP3 Pump (6.7C Based) (2007.5-2012 6.7L Cummins)","description":"\u003cdiv id=\"wsm-prod-tab-decrip\" class=\"wsm-tab-content wsm-tab-content-description\"\u003e\n\u003cdiv itemprop=\"description\" class=\"wsm-prod-tab-content\"\u003e\n\u003cdiv\u003eAre you losing rail pressure from a worn out CP3 pump? Are you in need of a factory replacement CP3 pump? Did you try a \"parts kit\" on your original pump with no fix? From stock up to 650+HP our Sportsman CP3 pumps are the best and most affordable solution for an upgraded pump that won't require significant supporting modifications or tuning.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eExergy Sportsman pumps have higher flowing valves that last longer than stock making them a great replacement option. They also continue to increase flow with RPM beyond 3,000 RPM. Stock pumps typically stop increasing flow when RPM exceeds approximately 3,000 RPM.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003ePioneering a reliable modified CP3 pump did not come easy. Thousands of hours of research and development have gone into making our pumps what they are today. We found the limits on a durability test bench, not on customers vehicles. After the initial R\u0026amp;D was complete, each series of pump was subject to one final test in which we ran the pump at 4500 rpms and a pressure that far exceeded what the pumps will see in the field for 40 hours. A final inspection was done after this test to ensure no parts had significant wear. In production, each and every pump is tested throughout the entire operating range of the pump up to 4500 rpm and 29,000 psi to ensure 100% proper function before being installed into a vehicle.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eOur Sportsman pumps have been verified by third party testing to have a \"Reasonable Bases\" of being compliant with Federal Emission requirements.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your fuel system purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNote: Though a lift pump is not required, to achieve maximum pump performance a fuel supply of 150 GPH @ 15 psi per pump is recommended.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThis pump can be used as a direct replacement for Bosch part numbers 0 986 437 334, 0 445 020 146, 0 445 020 076, 0 445 020 106, and 0 445 020 047, Cummins Part number 50104877AA, as well as Mopar part numbers R80277022AA and 8027067AC.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNO CORE CHARGE or CORE RETURNED NEEDED!!!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"Sportsman","offer_id":51914447290656,"sku":"E04 20305","price":1279.99,"currency_code":"USD","in_stock":true},{"title":"10mm Stroker","offer_id":51914447323424,"sku":"E04 20306","price":2159.99,"currency_code":"USD","in_stock":true},{"title":"12mm Stroker","offer_id":51914447356192,"sku":"E04 20307","price":2659.99,"currency_code":"USD","in_stock":true},{"title":"14mm Stroker","offer_id":51914447388960,"sku":"E04 20309","price":3209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-cp3-pump-67c-based-20075-2012-67l-cummins-7384039.png?v=1782447477"},{"product_id":"2007-5-2012-early-6-7-cummins-new-exergy-fuel-injectors-60-over-set-of-6-e02-20307","title":"Exergy Performance New Fuel injectors Set (2007.5-2012 6.7L Cummins)","description":"\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 New Bosch Injectors\u003c\/li\u003e\n\u003cli\u003eModified 60% flow over OEM\u003c\/li\u003e\n\u003cli\u003eCopper Washers\u003c\/li\u003e\n\u003cli\u003eO-rings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Exergy Performance","offers":[{"title":"30 Percent Over","offer_id":51914406166816,"sku":"E02 20305","price":4149.99,"currency_code":"USD","in_stock":true},{"title":"45 Percent Over","offer_id":51914406199584,"sku":"E02 20306","price":4219.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":51914406232352,"sku":"E02 20307","price":4299.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":51914406265120,"sku":"E02 20308","price":4539.99,"currency_code":"USD","in_stock":true},{"title":"150 Percent Over","offer_id":51914406297888,"sku":"E02 20350","price":4889.99,"currency_code":"USD","in_stock":true},{"title":"200 Percent Over","offer_id":51914406330656,"sku":"E02 20352","price":4989.99,"currency_code":"USD","in_stock":true},{"title":"250 Percent Over","offer_id":51914406363424,"sku":"E02 20354","price":5119.99,"currency_code":"USD","in_stock":true},{"title":"300 Percent Over","offer_id":51914406396192,"sku":"E02 20356","price":6399.99,"currency_code":"USD","in_stock":true},{"title":"400 Percent Over","offer_id":51914406428960,"sku":"E02 20360","price":6719.99,"currency_code":"USD","in_stock":true},{"title":"500 Percent Over","offer_id":51914406461728,"sku":"E02 20364","price":6919.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-20075-2012-early-67-cummins-new-exergy-fuel-injectors-60-over-set-of-6-e02-20307-7265116.png?v=1779545946"},{"product_id":"2007-5-2012-early-6-7-cummins-reman-exergy-sportsman-fuel-injectors-set-of-6-e01-20302","title":"Exergy Performance REMAN Fuel Injectors Set (2007.5-2012 6.7L Cummins)","description":"\u003cdiv\u003eHave your original or aftermarket injectors left you stranded? Are you cautious to use your truck for what its intended for? Want to feel confident in making that long trip across country or hauling that heavy load for work? Well, look no further than our Sportsman line of fuel injectors! \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAt 10% over stock, these are an affordable upgrade for stock trucks and people looking for a slight increase in performance without worrying about smoke or heat issues.  No other vehicle modifications are required.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector.  All components are built and tested on specialized equipment designed and built in-house at Exergy. Every Sportsman injector set is tested at multiple calibration points, and held to tolerances that are tighter than factory.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll our Reman injectors are remanufactured by Bosch where all moving parts and wear surfaces are replaced. Very few parts are reused.  In our years of experience these reman injectors have not exhibited an increased reliability risk.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)! For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThese injectors can be used as a direct replacement for Bosch part numbers 0 986 435 518, 0 445 120 050, 0 445 120 185, and 0 445 120 193, Cummins part numbers 3968158, 4937700, 4940051, 4940095, and 5253220, as well as Mopar part numbers R8069384AA, R8310749AA, R8002011AB, R8027067AA, and 68027067AB. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eCore Return:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eExergy requires that all cores be returned within 30 days from original purchase of product. If you fail to return the core(s) within 30 days, you will be charged in full for the core(s) ($150 per injector). Cores that have missing and\/or damaged component(s) will not receive credit. To avoid this, please package your cores well in an organized fashion with the Injector Process Form inserted (see examples and find Injector Process Form on the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Shipping and Returns\" href=\"https:\/\/www.exergyperformance.com\/ft-2433-shipping-returns.html\" rel=\"noopener\" target=\"_blank\"\u003eshipping and returns\u003c\/a\u003e page). If you have an outstanding circumstance, please contact us.\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Sportsman","offer_id":51914189537568,"sku":"E01 20302","price":2989.99,"currency_code":"USD","in_stock":true},{"title":"30 Percent Over","offer_id":51914189570336,"sku":"E01 20305","price":3769.99,"currency_code":"USD","in_stock":true},{"title":"45 Percent Over","offer_id":51914189603104,"sku":"E01 20306","price":3859.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":51914189635872,"sku":"E01 20307","price":3939.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":51914189668640,"sku":"E01 20308","price":4099.99,"currency_code":"USD","in_stock":true},{"title":"150 Percent Over","offer_id":51914189701408,"sku":"E01 20350","price":4239.99,"currency_code":"USD","in_stock":true},{"title":"200 Percent Over","offer_id":51914189734176,"sku":"E01 20352","price":4539.99,"currency_code":"USD","in_stock":true},{"title":"250 Percent Over","offer_id":51914189766944,"sku":"E01 20354","price":4749.99,"currency_code":"USD","in_stock":true},{"title":"300 Percent Over","offer_id":51914189799712,"sku":"E01 20356","price":5989.99,"currency_code":"USD","in_stock":true},{"title":"400 Percent Over","offer_id":51914189832480,"sku":"E01 20360","price":6289.99,"currency_code":"USD","in_stock":true},{"title":"500 Percent Over","offer_id":51914189865248,"sku":"E01 20364","price":6609.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-20075-2012-early-67-cummins-reman-exergy-sportsman-fuel-injectors-set-of-6-e01-20302-7953745.png?v=1779545888"},{"product_id":"2007-5-2012-early-6-7-cummins-exergy-550-alpha-stroker-cp3-pump-6-7c-based-e04-20310","title":"Exergy Performance E04 20310 550 Alpha Stroker CP3 Pump (6.7C Based) (2007.5-2012 6.7L Cummins)","description":"\u003cp\u003eIntroducing the Exergy 550 Alpha CP3! The first of an industry leading series of pumps set to take the CP3 pump platform to the next level! Based on our legendary 14mm Stroker pumps, the 550 Alpha CP3 carries the output trajectory 1000 RPM farther than previous and competing CP3 Stroker pumps, peaking at an output of 550 liters per hour. This makes it the perfect pump for high RPM race applications that spin beyond 4500 RPM.\u003c\/p\u003e\n\u003cp\u003eNote: The 550 Alpha pumps will require a different supply line. The original supply port is plugged.  This plug should never be removed. The fuel supply is fed directly into the billet gear pump housing at the port labeled \"Inlet\". The 550 Alpha pumps have a proprietary MPROP\/fuel pressure regulator design for optimum rail pressure control without impeding max pump performance. Custom tuning and supporting modifications will be required. Primary fuel supply requirement for max pump performance: 200 GPH @ 15 psi per Pump.\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653167321376,"sku":"E04 20310","price":3709.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e04-20310-550-alpha-stroker-cp3-pump-67c-based-20075-2010-duramax-3203282.png?v=1779545888"},{"product_id":"2011-2016-duramax-6-6l-m18x1-5-rail-plug-flush-mount-requires-triple-square-bit-1-000-002","title":"Exergy Performance 1-000-002 M18X1.5 Rail Plug Flush Mount (Requires Triple Square Bit) (2011-2016 Duramax)","description":"","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653167354144,"sku":"1-000-002","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-1-000-002-m18x15-rail-plug-flush-mount-requires-triple-square-bit-2011-2016-duramax-4554793.png?v=1779545888"},{"product_id":"2011-2016-lml-chevy-duramax-m16x1-5-fuel-rail-plug-kit-1-029-022","title":"Exergy Performance M16X1.5 Fuel Rail Plug Kit (2011-2016 6.6L Duramax)","description":"","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653167386912,"sku":"1-029-022","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-m16x15-fuel-rail-plug-kit-2011-2016-duramax-3890277.png?v=1779545888"},{"product_id":"2011-2016-lml-duramax-electronic-pressure-regulator-drv-e05-10520","title":"Exergy Performance E05 10520 Electronic Pressure Regulator DRV (2011-2016 6.6L Duramax)","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis part can be used as a direct replacement for Bosch part number 0 281 006 019, GM part number 12611872, as well as ACDelco part number 12611872.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e***Torque DRV to 85ft-lbs***\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653167911200,"sku":"E05 10520","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-10520-electronic-pressure-regulator-drv-2011-2016-duramax-6137089.png?v=1779545888"},{"product_id":"2011-2016-lml-duramax-exergy-improved-stock-cp4-2-pump-e04-10504","title":"Exergy Performance E04 10504 Improved Stock CP4.2 Pump (2011-2016 Duramax)","description":"\u003cdiv\u003eAre you loosing rail pressure from a worn out CP4.2 pump? Are you in need of a factory replacement pump? From stock up to 550+HP our Improved Stock LML CP4.2 pumps are the best and most affordable solution for an upgraded pump that won't require supporting modifications or tuning.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eOur Improved Stock pump comes with our System Saver Inlet Metering Valve installed.  This inlet valve replaces the factory single layer 85 micron inlet screen that is molded in a plastic frame with our two layer 10 micron screen which is mounted on a stainless steel frame that will not fail when the screen fills with debris and becomes a restriction. Not only is the screen over eight times finer than the factory screen, but the addition of another layer further increases protection from debris.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBased on a number of injector sets we have tested from systems with a failed pump with a System Saver installed it appears that injector survivability is increased more than 85% when compared to pump failures with the factory screen.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThere are further improvements beyond the fuel system saver:\u003c\/div\u003e\n\u003cdiv\u003e- Pump followers are now pinned which prevents the buckets from rotating, causing the roller to grind along the cam.\u003c\/div\u003e\n\u003cdiv\u003e- Rollers now have an increased diameter which makes them less susceptible to contamination jamming the roller. It also lowers the stresses at the cam\/roller interface.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your fuel system purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNote: Though a lift pump is not required, to achieve maximum pump performance a fuel supply of 150 GPH @ 8-10 psi per pump is recommended.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThis pump can be used as a direct replacement for Bosch part numbers 0 445 010 616, 0 986 437 421, and 0 445 010 817, as well as GM part numbers 98077841, 12645102, 12638262, 12658095, and 12661059.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNO CORE CHARGE or CORE RETURNED NEEDED!!!\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653168140576,"sku":"E04 10504","price":1659.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e04-10504-improved-stock-cp42-pump-2011-2016-duramax-4289779.png?v=1779545889"},{"product_id":"2011-2016-lml-duramax-fuel-injector-leak-rail-assembly-e05-10510","title":"Exergy Performance E05 10510 Fuel Injector Leak Rail Assembly (2011-2016 6.6L Duramax)","description":"\u003cp\u003eExergy Injector Leak Rail Assembly\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653168173344,"sku":"E05 10510","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-10510-fuel-injector-leak-rail-assembly-2011-2016-duramax-4388112.png?v=1779545888"},{"product_id":"2011-2016-lml-duramax-new-stock-replacement-lh-fuel-rail-e06-10550","title":"Exergy Performance E06 10550 New Stock Replacement LH Fuel Rail (2011-2016 6.6L Duramax)","description":"\u003cp\u003eExergy New Stock Replacement LML LH Fuel Rail\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653168959776,"sku":"E06 10550","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e06-10550-new-stock-replacement-lh-fuel-rail-2011-2016-duramax-6899121.png?v=1779545887"},{"product_id":"2011-2016-lml-duramax-new-stock-replacement-lh-fuel-rail-w-o-sensor-or-valve-e06-10552","title":"Exergy Performance E06 10552 New Stock Replacement LH Fuel Rail w\/o Sensor or Valve (2011-2016 6.6L Duramax)","description":"\u003cp\u003eExergy New Stock Replacement LML LH Fuel Rail w\/o Sensor and Valve\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653168992544,"sku":"E06 10552","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e06-10552-new-stock-replacement-lh-fuel-rail-wo-sensor-or-valve-2011-2016-duramax-8601910.png?v=1779545888"},{"product_id":"2011-2016-lml-duramax-new-stock-replacement-rh-fuel-rail-e06-10551","title":"Exergy Performance E06 10551 New Stock Replacement RH Fuel Rail (2011-2016 6.6L Duramax)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis part can be used as a direct replacement for Bosch part number F 00R L00 591, as well as GM part number 12620532.\u003c\/span\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653169025312,"sku":"E06 10551","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e06-10551-new-stock-replacement-rh-fuel-rail-2011-2016-duramax-7644078.png?v=1779545887"},{"product_id":"2011-2016-lml-duramax-rail-pressure-sensor-e05-10521","title":"Exergy Performance E05 10521 Rail Pressure Sensor (2011-2016 6.6L Duramax)","description":"\u003cdiv\u003eAre you seeing intermittent rail pressure fluctuations that are causing running issues? The rail pressure sensor may be the root cause.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe fuel pressure sensor is a crucial part of the high pressure fuel system. It effectively measures fuel pressure allowing for proper pressure control from the ECU. A faulty or failing sensor can cause serious running issues and potential system failure due to over pressure. If the connector is broken or cracked, water could be introduced to the terminals also causing incorrect information relayed back to the ECU. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNote: A professional diagnosis is recommended to ensure the rail pressure sensor is the cause of your issues. If mis-diagnosed and the rail pressure sensor does no fix your issue it can not be returned once it has been installed.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis part can be used as a direct replacement for Bosch part number 0 281 006 313, GM part number 12651990, as well as ACDelco part number 12651990.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e***Torque Rail Pressure Sensor to 52ft-lbs***\u003c\/span\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653169090848,"sku":"E05 10521","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-10521-rail-pressure-sensor-2011-2016-duramax-9116814.png?v=1779545887"},{"product_id":"2011-2016-lml-duramax-reman-exergy-fuel-injectors-60-over-set-of-8-e01-10508","title":"Exergy Performance REMAN Fuel Injectors Set (2011-2016 6.6L Duramax)","description":"\u003cdiv\u003eHave your original or aftermarket injectors left you stranded? Are you looking for an increase in power without sacrificing drivability or reliability? Well, look no further than our 20\/30\/45\/60\/100\/150\/200\/300% over fuel injectors!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAt 20% over stock, these are an excellent upgrade for close to stock trucks that have minimal supporting mods.  The nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector.  All components are built and tested on specialized equipment designed and built in-house at Exergy. Every 20% over injector set is tested at multiple calibration points, balanced to +\/- 1%, and shipped with a detailed calibration sheet.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll our Reman injectors are remanufactured by Bosch where all moving parts and wear surfaces are replaced. Very few parts are reused.  In our years of experience these reman injectors have not exhibited an increased reliability risk.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eFor the best drivability tuning is recommended.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)! For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"20 Percent Over","offer_id":50912337232160,"sku":"E01 10505","price":4449.99,"currency_code":"USD","in_stock":true},{"title":"30 Percent Over","offer_id":50912337264928,"sku":"E01 10506","price":4599.99,"currency_code":"USD","in_stock":true},{"title":"45 Percent Over","offer_id":50912337297696,"sku":"E01 10507","price":4699.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":50912337330464,"sku":"E01 10508","price":4809.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":50912337363232,"sku":"E01 10510","price":5119.99,"currency_code":"USD","in_stock":true},{"title":"150 Percent Over","offer_id":50912337396000,"sku":"E01 10514","price":5769.99,"currency_code":"USD","in_stock":true},{"title":"200 Percent Over","offer_id":50912337428768,"sku":"E01 10518","price":6389.99,"currency_code":"USD","in_stock":true},{"title":"300 Percent Over","offer_id":50912337461536,"sku":"E01 10520","price":7619.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e01-10508-reman-fuel-injectors-set-of-8-2011-2016-duramax-8844294.png?v=1779545886"},{"product_id":"2011-2016-lml-duramax-seal-kit-o-ring-and-copper-gasket-set-of-8-e05-10501","title":"Exergy Performance E05 10501 Seal Kit (O-Ring and Copper Gasket) Set (2011-2016 6.6L Duramax)","description":"\u003cp\u003eExergy Seal Kit (O-Ring and Copper Gasket)\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653171646752,"sku":"E05 10501","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-10501-seal-kit-o-ring-and-copper-gasket-set-of-8-2011-2016-duramax-8493873.png?v=1779545887"},{"product_id":"2011-2016-lml-duramax-new-exergy-fuel-injectors-300-over-w-internal-modification-set-of-8-e02-10520","title":"Exergy Performance New Fuel Injectors w\/Internal Modification Set (2011-2016 6.6L Duramax)","description":"\u003cdiv\u003eHave your original or aftermarket injectors left you stranded? Are you looking for an increase in power without sacrificing drivability or reliability? Well, look no further than our 20\/30\/45\/60\/100\/150\/200\/300% over fuel injectors!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAt 20% over stock, these are an excellent upgrade for close to stock trucks that have minimal supporting mods.  The nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector.  All components are built and tested on specialized equipment designed and built in-house at Exergy. Every 20% over injector set is tested at multiple calibration points, balanced to +\/- 1%, and shipped with a detailed calibration sheet.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eFor the best drivability tuning is recommended.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)! For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"20 Percent Over","offer_id":50912287752480,"sku":"E02 10505","price":4939.99,"currency_code":"USD","in_stock":true},{"title":"30 Percent Over","offer_id":50912287785248,"sku":"E02 10506","price":5089.99,"currency_code":"USD","in_stock":true},{"title":"45 Percent Over","offer_id":50912287818016,"sku":"E02 10507","price":5199.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":50912287850784,"sku":"E02 10508","price":5299.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":50912287883552,"sku":"E02 10510","price":5619.99,"currency_code":"USD","in_stock":true},{"title":"150 Percent Over","offer_id":50912287916320,"sku":"E02 10514","price":6269.99,"currency_code":"USD","in_stock":true},{"title":"200 Percent Over","offer_id":50912287949088,"sku":"E02 10518","price":6719.99,"currency_code":"USD","in_stock":true},{"title":"300 Percent Over","offer_id":50912287981856,"sku":"E02 10520","price":8069.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e02-10520-new-fuel-injectors-winternal-modification-set-of-8-2011-2016-duramax-3384999.png?v=1779545887"},{"product_id":"2011-2019-6-7-ford-power-stroke-seal-kit-o-ring-copper-gasket-set-of-8-e05-40101","title":"Exergy Performance E05 40101 Seal Kit (O-Ring \u0026 Copper Gasket) (Set of 8) (2011-2019 6.7L Powerstroke)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eAre you doing head gaskets and don't want to reuse the original injector seals? You are making the right choice. Replacing the injector seals is cheap insurance you won't have an issue when you get the truck back together. Don't risk having to do the job twice.\u003c\/span\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653172334880,"sku":"E05 40101","price":60.99,"currency_code":"USD","in_stock":true}]},{"product_id":"2011-2019-6-7-ford-scorpion-accessories-exergy-cp4-2-6an-supply-return-fitting-kit-1-018-295","title":"Exergy Performance 1-018-295 Scorpion Accessories CP4.2 -6AN Supply\/Return Fitting Kit (2011-2019 Power Stroke)","description":"\u003cp\u003eExergy Scorpion CP4.2 - 6AN Supply\/Return Fitting Kit\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653172367648,"sku":"1-018-295","price":109.99,"currency_code":"USD","in_stock":true}]},{"product_id":"2011-2019-6-7-power-stroke-exergy-improved-stock-cp4-2-pump-e04-40104","title":"Exergy Performance CP4.2 Pump (2011-2019 6.7L Powerstroke)","description":"\u003cdiv\u003eAre you loosing rail pressure from a worn out CP4.2 pump? Are you in need of a factory replacement pump? From stock up to 570+HP our Improved Stock 6.7 Power Stroke CP4.2 pumps are the best and most affordable solution for an upgraded pump that won't require supporting modifications or tuning.  For added flow capability our Improved Stock CP4.2 pumps are based on new pumps from the 2015-2019 series of 6.7 Power Stroke.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eOur Improved Stock pump comes with our System Saver Inlet Metering Valve installed.  This inlet valve replaces the factory single layer 85 micron inlet screen that is molded in a plastic frame with our two layer 10 micron screen which is mounted on a stainless steel frame that will not fail when the screen fills with debris and becomes a restriction. Not only is the screen over eight times finer than the factory screen, but the addition of another layer further increases protection from debris.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBased on a number of injector sets we have tested from systems with a failed pump with a System Saver installed it appears that injector survivability is increased more than 85% when compared to pump failures with the factory screen.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your fuel system purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNote: We recommend using the stock factory lift pump with this CP4.2.  It has enough flow with at the target feed pressure to support 900hp.  If an aftermarket lift pump is used, it will need a minimum pressure capability of 86psi.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThis pump can be used as a direct replacement for Bosch part numbers 0 445 010 649, 0 445 010 622, 0 445 010 851, 0 986 437 422, 0 445 010 844, 0 986 437 441, and 0 445 010 804, as well as Ford part numbers BC3Z-9A543-A, BC3Z-9A543-B, BC3Q-9B395-CB, BC3Q-9B395-CC, BC3Q-9B395-CD, BC3Q-9B395-CE, and FC3Q-9B395-AA.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNO CORE CHARGE or CORE RETURNED NEEDED!!!\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"Stock","offer_id":50912255476000,"sku":"E04 40104","price":1369.99,"currency_code":"USD","in_stock":true},{"title":"10mm Stroker","offer_id":50912255508768,"sku":"E04 40106","price":2209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-cp42-pump-2011-2019-power-stroke-2011-2019-power-stroke-5798525.png?v=1779545887"},{"product_id":"2011-2019-6-7-power-stroke-new-exergy-fuel-injectors-60-over-set-of-8-e02-40108","title":"Exergy Performance New Fuel Injectors Set (2011-2019 6.7L Powerstroke)","description":"\u003cdiv\u003eHave your original or aftermarket injectors left you stranded? Are you looking for an increase in power without sacrificing drivability or reliability? Well, look no further than our 20\/30\/45\/60\/100\/150\/200\/300% over fuel injectors!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAt 20% over stock, these are an excellent upgrade for close to stock trucks that have minimal supporting mods.  The nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector.  All components are built and tested on specialized equipment designed and built in-house at Exergy. Every 20% over injector set is tested at multiple calibration points, balanced to +\/- 1%, and shipped with a detailed calibration sheet.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eFor the best drivability tuning is recommended.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)! For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"20 Percent Over","offer_id":50912237322528,"sku":"E02 40105","price":4849.99,"currency_code":"USD","in_stock":true},{"title":"30 Percent Over","offer_id":50912237355296,"sku":"E02 40106","price":4999.99,"currency_code":"USD","in_stock":true},{"title":"45 Percent Over","offer_id":50912237388064,"sku":"E02 40107","price":5099.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":50912237420832,"sku":"E02 40108","price":5209.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":50912237453600,"sku":"E02 40110","price":5729.99,"currency_code":"USD","in_stock":true},{"title":"150 Percent Over","offer_id":50912237486368,"sku":"E02 40114","price":6149.99,"currency_code":"USD","in_stock":true},{"title":"200 Percent Over","offer_id":50912237519136,"sku":"E02 40118","price":6409.99,"currency_code":"USD","in_stock":true},{"title":"300 Percent Over","offer_id":50912237551904,"sku":"E02 40120","price":7689.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e02-40108-new-fuel-injectors-set-of-8-2011-2019-power-srtroke-8930729.png?v=1779545886"},{"product_id":"2011-2019-6-7-power-stroke-reman-exergy-fuel-injectors-60-over-set-of-8-e01-40108","title":"Exergy Performance REMAN Fuel Injectors Set (2011-2019 6.7L Powerstroke)","description":"\u003cdiv\u003eHave your original or aftermarket injectors left you stranded? Are you looking for an increase in power without sacrificing drivability or reliability? Well, look no further than our 20\/30\/45\/60\/80\/100\/150% over fuel injectors!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAt 20% over stock, these are an excellent upgrade for close to stock trucks that have minimal supporting mods.  The nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector.  All components are built and tested on specialized equipment designed and built in-house at Exergy. Every 20% over injector set is tested at multiple calibration points, balanced to +\/- 1%, and shipped with a detailed calibration sheet.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll our Reman injectors are remanufactured by Bosch where all moving parts and wear surfaces are replaced. Very few parts are reused.  In our years of experience these reman injectors have not exhibited an increased reliability risk.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eFor the best drivability tuning is recommended.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)!  For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"20 Percent Over","offer_id":50912183288096,"sku":"E01 40105","price":4409.99,"currency_code":"USD","in_stock":true},{"title":"30 Percent Over","offer_id":50912183320864,"sku":"E01 40106","price":4559.99,"currency_code":"USD","in_stock":true},{"title":"45 Percent Over","offer_id":50912183353632,"sku":"E01 40107","price":4659.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":50912183386400,"sku":"E01 40108","price":4769.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":50912183419168,"sku":"E01 40110","price":5269.99,"currency_code":"USD","in_stock":true},{"title":"150 Percent Over","offer_id":50912183451936,"sku":"E01 40114","price":5709.99,"currency_code":"USD","in_stock":true},{"title":"200 Percent Over","offer_id":50912183484704,"sku":"E01 40118","price":5969.99,"currency_code":"USD","in_stock":true},{"title":"300 Percent Over","offer_id":50912183517472,"sku":"E01 40120","price":7259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e01-40108-reman-fuel-injectors-set-of-8-2011-2019-power-stroke-1517008.png?v=1779545886"},{"product_id":"2011-2019-6-7-ford-power-stroke-electronic-pressure-regulator-drv-e05-40120","title":"Exergy Performance E05 40120 Electronic Pressure Regulator DRV (2011-2019 6.7L Powerstroke)","description":"\u003cp\u003eThis part can be used as a direct replacement for Bosch part number 0 281 006 019 as well as Ford Motorcraft part number CM5185 (BC3Z9C968A).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e***Torque DRV to 85ft-lbs***\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653174858016,"sku":"E05 40120","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-40120-electronic-pressure-regulator-drv-2011-2019-power-stroke-6188207.png?v=1779545886"},{"product_id":"2011-2019-6-7-ford-power-stroke-exergy-leak-rail-asembly-e05-40110","title":"Exergy Performance E05 40110 Leak Rail Assembly (2011-2019 6.7L Powerstroke)","description":"\u003cp\u003eExergy Leak Rail Asembly\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653174890784,"sku":"E05 40110","price":209.99,"currency_code":"USD","in_stock":true}]},{"product_id":"2011-2019-6-7-ford-power-stroke-new-stock-replacement-lh-fuel-rail-e05-40150","title":"Exergy Performance E05 40150 New Stock Replacement LH Fuel Rail (2011-2019 6.7L Powerstroke)","description":"\u003cp\u003eThis part can be used as a direct replacement for Bosch part number 0 445 218 017, and Ford part number BC3Z9D280B.\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653174923552,"sku":"E05 40150","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-40150-new-stock-replacement-lh-fuel-rail-2011-2019-power-stroke-9574883.png?v=1779545886"},{"product_id":"2011-2019-6-7-ford-power-stroke-new-stock-replacement-rh-fuel-rail-e05-40151","title":"Exergy Performance E05 40151 New Stock Replacement RH Fuel Rail (2011-2019 6.7L Powerstroke)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis part can be used as a direct replacement for Bosch part number 0 445 218 015, and Ford part number BC3Z9D280A.\u003c\/span\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653174956320,"sku":"E05 40151","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-40151-new-stock-replacement-rh-fuel-rail-2011-2019-power-stroke-5672807.png?v=1779545887"},{"product_id":"2011-2019-6-7-ford-power-stroke-return-port-o-ring-e05-40111","title":"Exergy Performance E05 40111 Return Port O-ring (2011-2019 6.7L Powerstroke)","description":"\u003cp\u003eO-ring (Return Port)\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653175021856,"sku":"E05 40111","price":4.99,"currency_code":"USD","in_stock":true}]},{"product_id":"2011-2024-6-7-ford-power-stroke-fuel-system-saver-improved-stock-inlet-metering-valve-fca-mprop-e05-40105","title":"Exergy Performance E05 40105 Fuel System Saver Improved Stock Inlet Metering Valve (FCA\/MPROP) (2011-2024 6.7L Powerstroke)","description":"\u003cdiv\u003eAre you concerned about the possibility your CP4.2 could fail and damage your injectors as well as contaminate the rest of your high pressure system? Our System Saver Inlet Metering valve (also called FCA and MPROP) offers an affordable option to help protect your high dollar fuel system components.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eStarting with a new inlet metering valve from Bosch we replace the factory single layer 85 micron inlet screen that is molded in a plastic frame with one of our own design. The Exergy screen is mounted on a stainless steel frame that will not fail when the screen fills with debris and becomes a restriction. It also has two layers of 10 micron screen.  Not only is the screen over eight times finer than the factory screen, but the addition of another layer further increases protection from debris.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBased on a number of injector sets we have tested from systems with a failed CP4.2 pump with a System Saver installed it appears that injector survivability is increased more than 85% when compared to CP4.2 failures with the factory screen.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eShould the pump actually fail we recommend replacing the pump, and not replacing the injectors unless there are injector related symptoms present after the install.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe System Saver Inlet Metering Valve is also a wise upgrade should the valve need to be replaced to address traditional metering valve failure modes such as idle surge and excessive rail pressure fluctuations.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003ePlease note that a valve cannot be returned after it has been installed.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThis part can be used as a direct replacement for Bosch part number 0 928 400 779 and 0 928 400 757, as well as Ford part number BC3Z9J307A.\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653175054624,"sku":"E05 40105","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-40105-fuel-system-saver-improved-stock-inlet-metering-valve-fcamprop-2011-2024-power-stroke-8534050.png?v=1779545886"},{"product_id":"2013-2018-cummins-6-7-high-pressure-feed-tube-set-of-6-e05-20410","title":"Exergy Performance E05 20410 High Pressure Feed Tube Set (2013-2018 6.7L Cummins)","description":"\u003cdiv\u003eHave your feed tubes been in service for some time?  Might there be a chance that the extended hot cranking you've been experiencing is due to leakage at the feed tube\/injector interface? Then we highly recommend that the feed tubes be replaced whenever the injectors are removed from the head.  Incorrect alignment at assembly, and relative micro movement in service can cause leak paths between the injector and tube that leads to rail pressure loss.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis part can be used as a direct replacement for Bosch part numbers F 00R J01 572, F 00R C00 647, and F 00R J01 831, Cummins part number 4929864, 3979419, 4929865, 2872288, and 2872395, as well as Mopar part numbers 5086874AB, 5175565AA, 6800533AA, 68460261AA, and 68005335AA.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653175251232,"sku":"E05 20410","price":409.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-20410-high-pressure-feed-tube-set-of-6-2013-2018-cummins-6437701.png?v=1779545887"},{"product_id":"2013-2018-cummins-6-7-inlet-metering-valve-fca-mprop-e05-20405","title":"Exergy Performance E05 20405 Inlet Metering Valve (FCA\/MPROP) (2013-2018 6.7L Cummins)","description":"\u003cdiv\u003eDo you have an engine lope at idle or surging while driving? Are you seeing unusual rail pressure fluctuations? Your 6.7 Inlet Metering Valve may be the root cause. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAlso known as the FCA (fuel control actuator) or the MPROP, this component can wear from age or poor fuel quality causing inconsistent travel in the spool valve. The MPROP controls the flow of fuel to the CP3 pump. A crucial part of the high pressure fuel system and if not functioning properly can cause severe running issues.  \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNote: A professional diagnosis is recommended to ensure the MPROP is the cause of your issues. If mis-diagnosed and the MPROP does not fix your issue it cannot be returned once it has been installed.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis part can be used as a direct replacement for Bosch part number 0 928 400 642 and 1 465 ZS0 054, Cummins part number 68005241AA, as well as Mopar part number 68005241AA.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653175742752,"sku":"E05 20405","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-20405-inlet-metering-valve-fcamprop-2013-2018-cummins-5969501.png?v=1779545887"},{"product_id":"2013-2018-cummins-6-7-rail-pressure-sensor-e05-20415","title":"Exergy Performance E05 20415 Rail Pressure Sensor (2013-2018 6.7L Cummins)","description":"\u003cdiv\u003eAre you seeing intermittent rail pressure fluctuations that are causing running issues? The rail pressure sensor may be the root cause.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe fuel pressure sensor is a crucial part of the high pressure fuel system. It effectively measures fuel pressure allowing for proper pressure control from the ECU. A faulty or failing sensor can cause serious running issues and potential system failure due to over pressure. If the connector is broken or cracked, water could be introduced to the terminals also causing incorrect information to be relayed back to the ECU. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNote:  A professional diagnosis is recommended to ensure the rail pressure sensor is the cause of your issues. If mis-diagnosed and the rail pressure sensor does not fix your issue it cannot be returned once it has been installed.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThis part can be used as a direct replacement for Bosch part number 0 281 006 327, as well as Cummins part number 52976640.\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e***Torque Rail Pressure Sensor to 52ft-lbs***\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653176103200,"sku":"E05 20415","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-20415-rail-pressure-sensor-2013-2018-cummins-1822689.png?v=1779545887"},{"product_id":"2013-2018-cummins-6-7-replacement-fuel-rail-complete-w-sensor-prv-e06-20450","title":"Exergy Performance E06 20450 Replacement Fuel Rail (Complete w\/Sensor \u0026 PRV) (2013-2018 6.7L Cummins)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis part can be used as a direct replacement for Bosch part number 0 445 226 126, as well as Cummins part number 5275117 and 68210146AA.\u003c\/span\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653176561952,"sku":"E06 20450","price":409.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e06-20450-replacement-fuel-rail-complete-wsensor-prv-2013-2018-cummins-2856369.png?v=1779545886"},{"product_id":"2013-2018-cummins-6-7-seal-kit-o-ring-copper-gasket-set-of-6-e05-20401","title":"Exergy Performance E05 20401 Seal Kit (O-Ring \u0026 Copper Gasket) Set (2013-2018 6.7L Cummins) | Fuel Injector","description":"\u003cp\u003eExergy Seal Kit (O-Ring \u0026amp; Copper Gasket)\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653176824096,"sku":"E05 20401","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-20401-seal-kit-o-ring-copper-gasket-set-of-6-2013-2018-cummins-fuel-injector-4422011.png?v=1779545829"},{"product_id":"2013-2018-late-6-7-cummins-new-exergy-fuel-injectors-60-over-set-of-6-e02-20407","title":"Exergy Performance New Exergy injectors Set (2013-2018 6.7L Cummins)","description":"\u003cdiv\u003eHave your original or aftermarket injectors left you stranded? Are you looking for an increase in power without sacrificing drivability or reliability? Well, look no further than our 30\/45\/60\/100% over fuel injectors!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAt 30% over stock, these are an excellent upgrade for close to stock trucks that have minimal supporting mods.  The nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector. All components are built and tested on specialized equipment designed and built in-house at Exergy. Every 30% over injector set is tested at multiple calibration points, balanced to +\/- 1%, and shipped with a detailed calibration sheet.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eFor the cleanest idle and best drivability tuning is recommended.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)! For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"30 Percent Over","offer_id":50912089014560,"sku":"E02 20405","price":4269.99,"currency_code":"USD","in_stock":true},{"title":"45 Percent Over","offer_id":50912089047328,"sku":"E02 20406","price":4339.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":50912089080096,"sku":"E02 20407","price":4419.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":50912089112864,"sku":"E02 20408","price":4639.99,"currency_code":"USD","in_stock":true},{"title":"150 Percent Over","offer_id":50912089145632,"sku":"E02 20450","price":4979.99,"currency_code":"USD","in_stock":true},{"title":"200 Percent Over","offer_id":50912089178400,"sku":"E02 20452","price":5329.99,"currency_code":"USD","in_stock":true},{"title":"250 Percent Over","offer_id":50912089211168,"sku":"E02 20454","price":5479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-new-exergy-injectors-set-of-6-2013-2018-cummins-4980390.png?v=1779545829"},{"product_id":"2013-2018-late-6-7-cummins-reman-exergy-sportsman-fuel-injectors-set-of-6-e01-20402","title":"Exergy Performance REMAN Fuel Injectors Set (2013-2018 6.7L Cummins)","description":"\u003cdiv\u003eHave your original or aftermarket injectors left you stranded? Are you cautious to use your truck for what its intended for? Want to feel confident in making that long trip across country or hauling that heavy load for work? Well, look no further than our Sportsman line of fuel injectors! \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAt 10% over stock, these are an affordable upgrade for stock trucks and people looking for a slight increase in performance without worrying about smoke or heat issues.  No other vehicle modifications are required.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector.  All components are built and tested on specialized equipment designed and built in-house at Exergy. Every Sportsman injector set is tested at multiple calibration points, and held to tolerances that are tighter than factory.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll our Reman injectors are remanufactured by Bosch where all moving parts and wear surfaces are replaced. Very few parts are reused.  In our years of experience these reman injectors have not exhibited an increased reliability risk.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)! For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThese injectors can be used as a direct replacement for Bosch part numbers 0 986 435 621 and 0 445 120 342, Cummins part number 4994925, and Mopar part numbers R8210512AA, R8415373AA, and 68210105AA. \u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"Sportsman","offer_id":50912060735776,"sku":"E01 20402","price":2989.99,"currency_code":"USD","in_stock":true},{"title":"30 Percent Over","offer_id":50912060768544,"sku":"E01 20405","price":3769.99,"currency_code":"USD","in_stock":true},{"title":"45 Percent Over","offer_id":50912060801312,"sku":"E01 20406","price":3859.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":50912060834080,"sku":"E01 20407","price":3939.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":50912060866848,"sku":"E01 20408","price":4099.99,"currency_code":"USD","in_stock":true},{"title":"150 Percent Over","offer_id":50912060899616,"sku":"E01 20450","price":4369.99,"currency_code":"USD","in_stock":true},{"title":"200 Percent Over","offer_id":50912064995616,"sku":"E01 20452","price":4539.99,"currency_code":"USD","in_stock":true},{"title":"250 Percent Over","offer_id":50912065028384,"sku":"E01 20454","price":4749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-reman-fuel-injectors-set-of-6-2013-2018-cummins-9963909.png?v=1779545829"},{"product_id":"2013-2018-2021-late-6-7-cummins-exergy-14mm-stroker-cp3-pump-race-series-6-7c-based-e04-20409","title":"Exergy Performance CP3 Pump - Race Series (6.7C Based) (2010-2018, 2021-2024 6.7L Cummins)","description":"\u003cdiv\u003eOne of the biggest pumps on the market with a track record to prove it. A single CP3 pump that will easily support 1200HP and in some applications have gone up to 1500+HP on fuel only! Don’t get caught with dual pump issues when you can make this kind of power with the simplicity of one pump! For high horsepower applications pushing the limits of the diesel rpm range our race series 14mm Stroker CP3 pumps is the best option to take your build to the next level.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003ePioneering a reliable modified CP3 pump did not come easy. Thousands of hours of research and development have gone into making our pumps what they are today. We found the limits on a durability test bench, not on customers vehicles. After the initial R\u0026amp;D was complete, each series of pump was subject to one final test in which we ran the pump at 4500 rpms and a pressure that far exceeded what the pumps will see in the field for 40 hours. A final inspection was done after this test to ensure no parts had significant wear. In production, each and every pump is tested throughout the entire operating range of the pump up to 4500 rpm and 29,000 psi to ensure 100% proper function before being installed into a vehicle.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Exergy Late 6.7 Cummins CP3's are compatible with 2013-2018 6.7s, as well as 2021-present 6.7s. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eFactory CP4.2 trucks, that have had the CP3 conversion performed by Dodge under their recall, utilize a different CP3 pump that has a longer output shaft. This CP3 pump is not compatible with these vehicles.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your fuel system purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e Note: The Race Series 14mm pumps will require a different supply line. The original supply port is plugged.  This plug should never be removed. The fuel supply is fed directly into the billet gear pump housing at the port labeled \"Inlet\". The 14mm Stroker CP3 pumps have a proprietary MPROP\/fuel pressure regulator design for optimum rail pressure control without impeding max pump performance. Custom tuning and supporting modifications will be required. Primary fuel supply requirement for max pump performance: 200 GPH @ 15 psi per Pump.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNO CORE CHARGE or CORE NEEDED RETURNED!!!\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"Sportsman","offer_id":50912037601568,"sku":"E04 20405","price":1279.99,"currency_code":"USD","in_stock":true},{"title":"10mm Stroker","offer_id":50912037634336,"sku":"E04 20406","price":2159.99,"currency_code":"USD","in_stock":true},{"title":"12mm Stroker","offer_id":50912037667104,"sku":"E04 20407","price":2659.99,"currency_code":"USD","in_stock":true},{"title":"14mm Stroker","offer_id":50912037699872,"sku":"E04 20409","price":3209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-cp3-pump-race-series-67c-based-2010-2018-2021-2024-cummins-4762342.png?v=1779545830"},{"product_id":"2017-l5p-duramax-denso-hp4-pump-e04-10702","title":"Exergy Performance E04 10702 Denso HP4 Pump (2017-2024 6.6L Duramax)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis pump can be used as a direct replacement for GM part numbers 12678993 and 12701094, Denso part number 294050-0701, Alliant Power part number AP54850 and AP54851, as well as International part number 6040608C91. \u003c\/span\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653178233120,"sku":"E04 10702","price":1089.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e04-10702-denso-hp4-pump-2017-2024-duramax-5669716.png?v=1779545829"},{"product_id":"2017-l5p-duramax-new-exergy-stock-replacement-fuel-injectors-set-of-8-e02-10701","title":"Exergy Performance New Replacement Fuel Injectors Set (2017-2024 6.6L Duramax)","description":"\u003cdiv\u003eDo you want to edge out that Mustang at the track or put another 5' on the next truck? Are you looking for an increase in power without sacrificing drivability or reliability? Well, look no further than our Stock\/30\/60\/100\/200% over fuel injectors!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector. All components are built and tested on specialized equipment designed and built in-house at Exergy. Every 100% over injector set is tested at multiple calibration points, balanced to +\/- 1%, and shipped with a detailed calibration sheet.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eTuning will be needed for acceptable EGTs and optimum drivability.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)! For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"Stock","offer_id":50911842697504,"sku":"E02 10701","price":2520.99,"currency_code":"USD","in_stock":true},{"title":"30 Percent Over","offer_id":50911842730272,"sku":"E02 10706","price":3909.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":50911842763040,"sku":"E02 10708","price":4129.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":50911842795808,"sku":"E02 10710","price":4449.99,"currency_code":"USD","in_stock":true},{"title":"200 Percent Over","offer_id":50911842828576,"sku":"E02 10718","price":6299.99,"currency_code":"USD","in_stock":true},{"title":"300 Percent Over","offer_id":51913036792096,"sku":"E02 10720","price":6929.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-new-replacement-fuel-injectors-set-of-8-2017-2019-duramax-9570309.png?v=1779545829"},{"product_id":"2019-6-7-cummins-exergy-rail-pressure-sensor-e05-20915","title":"Exergy Performance E05 20915 Rail Pressure Sensor (2019-2024 6.7L Cummins)","description":"\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eAre you seeing intermittent rail pressure fluctuations that are causing running issues? The rail pressure sensor may be the root cause.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e The fuel pressure sensor is a crucial part of the high pressure fuel system. It effectively measures fuel pressure allowing for proper pressure control from the ECU. A faulty or failing sensor can cause serious running issues and potential system failure due to over pressure. If the connector is broken or cracked, water could be introduced to the terminals also causing incorrect information to be relayed back to the ECU. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eNote:  A professional diagnosis is recommended to ensure the rail pressure sensor is the cause of your issues. If mis-diagnosed and the rail pressure sensor does not fix your issue it cannot be returned once it has been installed.\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e***Torque Rail Pressure Sensor to 52ft-lbs***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653178724640,"sku":"E05 20915","price":189.99,"currency_code":"USD","in_stock":true}]},{"product_id":"2019-6-7-cummins-exergy-seal-kit-o-ring-copper-gasket-e05-20901","title":"Exergy Performance E05 20901 Seal Kit O-Ring \u0026 Copper Gasket (2019-2024 6.7L Cummins)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eAre you removing the injectors and don't want to reuse the seals? You are making the right choice. Replacing the injector seals is cheap insurance that you won't have an issue when you get the truck back together. Don't risk having to do the job twice.\u003c\/span\u003e\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653178757408,"sku":"E05 20901","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-20901-seal-kit-o-ring-copper-gasket-2019-2024-cummins-8758051.png?v=1779545829"},{"product_id":"2019-6-7-cummins-exergy-high-pressure-feed-tube-e05-20910","title":"Exergy Performance E05 20910 High Pressure Feed Tube Set (2019-2024 6.7L Cummins)","description":"\u003cdiv\u003eHave your feed tubes been in service for some time?  Might there be a chance that the extended hot cranking you've been experiencing is due to leakage at the feed tube\/injector interface? Then we highly recommend that the feed tubes be replaced whenever the injectors are removed from the head.  Incorrect alignment at assembly, and relative micro movement in service can cause leak paths between the injector and tube that leads to rail pressure loss.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThis part can be used as a direct replacement for Bosch part numbers F 00R J01 572, F 00R C00 647, and F 00R J01 831, Cummins part number 4929864, 3979419, 4929865, 2872288, and 2872395, as well as Mopar part numbers 5086874AB, 5175565AA, 6800533AA, 68460261AA, and 68005335AA.\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653178822944,"sku":"E05 20910","price":409.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-20910-high-pressure-feed-tube-2019-2024-cummins-6754485.png?v=1779545829"},{"product_id":"2019-2020-6-7-cummins-exergy-replacement-fuel-rail-complete-w-sensor-prv-e05-20950","title":"Exergy Performance E05 20950 Replacement Fuel Rail Complete w\/Sensor \u0026 PRV (2019-2024 6.7L Cummins)","description":"\u003cp\u003eExergy Replacement Fuel Rail (Complete w\/Sensor \u0026amp; PRV)\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653178986784,"sku":"E05 20950","price":309.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-20950-replacement-fuel-rail-complete-wsensor-prv-2019-2024-cummins-6071071.png?v=1779545829"},{"product_id":"2019-2021-6-7-cummins-new-exergy-ho-fuel-injectors-60-over-set-of-6-e02-20807","title":"Exergy Performance New Exergy HO Fuel Injectors Set (2019-2021 6.7L Cummins)","description":"\u003cdiv\u003eAre you looking for an increase in power without sacrificing drivability or reliability? Well, look no further than our 30\/60\/100% over fuel injectors!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector.  All components are built and tested on specialized equipment designed and built in-house at Exergy. Every 60% over injector set is tested at multiple calibration points, balanced to +\/- 1%, and shipped with a detailed calibration sheet.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eTuning will be needed for acceptable EGTs and optimum drivability.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)! For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"30 Percent Over","offer_id":50911587959072,"sku":"E02 20805","price":5169.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":50911587991840,"sku":"E02 20807","price":5329.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":50911588024608,"sku":"E02 20808","price":5569.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-new-exergy-ho-fuel-injectors-set-of-6-2019-2024-cummins-7581081.png?v=1779545829"},{"product_id":"2019-2021-6-7-cummins-new-exergy-so-fuel-injectors-60-over-set-of-6-e02-20707","title":"Exergy Performance New Exergy SO Fuel Injectors Set (2019-2021 6.7L Cummins)","description":"\u003cdiv\u003eAre you looking for an increase in power without sacrificing drivability or reliability? Well, look no further than our 30\/60\/100% over fuel injectors!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe nozzles are enlarged using abrasive flow honing technology and are hydraulically flow matched to less than 1%. Each nozzle undergoes four separate quality control checks throughout the process before being installed back onto the injector.  All components are built and tested on specialized equipment designed and built in-house at Exergy. Every 60% over injector set is tested at multiple calibration points, balanced to +\/- 1%, and shipped with a detailed calibration sheet.  There are no shortcuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eLet Exergy give you peace of mind with your injector purchase!\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eTuning will be needed for acceptable EGTs and optimum drivability.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eInjector seal kit included (copper gaskets and O-rings)! For injector sizing please contact us for more information. Core $150.00 each \/ Pending 30 day return policy.\u003c\/div\u003e","brand":"Exergy Performance","offers":[{"title":"30 Percent Over","offer_id":50911453774112,"sku":"E02 20705","price":5169.99,"currency_code":"USD","in_stock":true},{"title":"60 Percent Over","offer_id":50911453806880,"sku":"E02 20707","price":5329.99,"currency_code":"USD","in_stock":true},{"title":"100 Percent Over","offer_id":50911453839648,"sku":"E02 20708","price":5569.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-new-exergy-so-fuel-injectors-set-of-6-2019-2024-cummins-3835910.png?v=1779545829"},{"product_id":"2019-21-6-7-cummins-cp4-2-exergy-system-saver-improved-stock-inlet-metering-valve-e05-20905","title":"Exergy Performance E05 20905 CP4.2 System Saver Improved Stock Inlet Metering Valve (2019-2020 6.7L Cummins)","description":"\u003cp\u003eExergy System Saver Improved Stock Inlet Metering Valve (FCA\/MPROP)\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653179380000,"sku":"E05 20905","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e05-20905-cp42-system-saver-improved-stock-inlet-metering-valve-2019-2024-cummins-2404581.png?v=1779545829"},{"product_id":"cummins-6-7-duramax-lly-lbz-lmm-port-to-female-m18x1-5-1-018-167","title":"Exergy Performance 1-018-167 Port to Female M18X1.5 (2004.5-2010 Duramax)","description":"","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653179445536,"sku":"1-018-167","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-1-018-167-port-to-female-m18x15-20045-2010-duramax-6566995.png?v=1779545830"},{"product_id":"cummins-6-7-duramax-lly-lbz-lmm-prv-plug-w-o-ring-for-diagnostic-purposes-only-1-018-172","title":"Exergy Performance 1-018-172 PRV Plug w\/ O-ring (For Diagnostic Purposes Only) (2004.5-2010 Duramax)","description":"","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653179478304,"sku":"1-018-172","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-1-018-172-prv-plug-w-o-ring-for-diagnostic-purposes-only-20045-2010-duramax-9412597.png?v=1779545828"},{"product_id":"cummins-6-7-duramax-lly-lbz-lmm-rail-fitting-for-hp-line-into-prv-location-1-018-153-a","title":"Exergy Performance 1-018-153-A Rail Fitting For HP Line Into PRV Location | Fuel System | Duramax","description":"\u003cp\u003eFits: 2004.5-2010 Duramax; 2007.5-2018 Cummins\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653179511072,"sku":"1-018-153-A","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-1-018-153-a-rail-fitting-for-hp-line-into-prv-location-fuel-system-duramax-4946405.png?v=1779545828"},{"product_id":"cummins-6-7-lly-lbz-lmm-duramax-1800-bar-26-000-psi-pressure-relief-valve-e07-00010","title":"Exergy Performance E07 00010 1800 Bar (26 000 PSI) Pressure Relief Valve (2004.5-2010 6.6L Duramax, 2007.5-2018 6.7L Cummins)","description":"\u003cp\u003eFits: 2004.5-2010 Duramax; 2007.5-2018 Cummins\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653179576608,"sku":"E07 00010","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e07-00010-1800-bar-26-000-psi-pressure-relief-valve-fuel-system-duramax-4047017.png?v=1779545828"},{"product_id":"cummins-6-7-lly-lbz-lmm-duramax-2000-bar-29-000-psi-pressure-relief-valve-e07-00012","title":"Exergy Performance E07 00012 2000 Bar (29 000 PSI) Pressure Relief Valve (2004.5-2010 6.6L Duramax, 2007.5-2018 6.7L Cummins)","description":"\u003cp\u003eFits: 2004.5-2010 Duramax; 2007.5-2018 Cummins\u003c\/p\u003e","brand":"Exergy Performance","offers":[{"title":"Default Title","offer_id":50653179609376,"sku":"E07 00012","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/exergy-performance-e07-00012-2000-bar-29-000-psi-pressure-relief-valve-fuel-system-duramax-7176865.png?v=1779545828"}],"url":"https:\/\/www.southerndieselsupply.com\/collections\/exergy.oembed","provider":"Southern Diesel Supply","version":"1.0","type":"link"}