{"title":"Chevrolet, (2024-present), L5P, Suspension, Lift Kit","description":"","products":[{"product_id":"fox-2-5-coil-over-conversion-upgrade-6-5-inch-lift-silverado-sierra-2500hd-3500hd-20-24-diesel","title":"BDS Suspension FOX 2.5 Coil-Over Conversion Upgrade 6.5 Inch Lift (2020-2026 Duramax 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eBDS offers complete coilover conversion upgrade kits for your Chevy Silverado and GMC Sierra 2500 \/ 3500 HD that make it effortless to convert your standard lifted suspension into coilovers.\u003c\/p\u003e\n\u003cp\u003eThese kits are equipped with heavy-duty brackets and FOX 2.5 Coilovers to withstand any rugged use and abuse you subject them to, taking your vehicle's performance to new heights. These upgrade kits are compatible with existing BDS 6-inch lift kits, allowing for seamless integration.\u003c\/p\u003e\n\u003cp\u003eBDS provides a bolt-on bracket for mounting the coilovers to the frame in the shock mount location. To reinforce the upper mount, a weld-in support gusset is utilized. Aside from replacing the factory torsion bars, the upper and lower control arms are also upgraded for enhanced strength and travel to accommodate the new coilovers.\u003c\/p\u003e\n\u003cp\u003eThe tubular performance upper control arms, specially designed by BDS for this system, work seamlessly with the 2.5 coilovers. The new lower control arms, on the other hand, are built from high-strength steel, fully boxed, and internally gusseted to complement the uppers.\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Coil-Overs\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Factory Dual Speed Compression Adjust shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms\u003c\/p\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 Inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability.\u003c\/p\u003e\n\u003cp\u003eArms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Shocks\u003c\/li\u003e\n\u003cli\u003eLower Mount Type: No Lower Mount Type\u003c\/li\u003e\n\u003cli\u003eUpper Mount Type: No Upper Mount Type\u003c\/li\u003e\n\u003cli\u003eGas Charged: No Gas Charged\u003c\/li\u003e\n\u003cli\u003eAdjustable: true\u003c\/li\u003e\n\u003cli\u003eAdjustable Dampening: No Adjustable Dampening\u003c\/li\u003e\n\u003cli\u003eCompressed Length: No Compressed Length\u003c\/li\u003e\n\u003cli\u003eTravel Length: No Travel Length\u003c\/li\u003e\n\u003cli\u003eExtended Length: No Extended Length\u003c\/li\u003e\n\u003cli\u003eShaft Diameter: No Shaft Diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Coilovers w\/ Remote Dual Speed Compression Adjust Adjustment\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular UCAs to improve travel\u003c\/li\u003e\n\u003cli\u003eFully Boxed and Gusseted LCAs\u003c\/li\u003e\n\u003cli\u003eNext Level Performance On and Offroad\u003c\/li\u003e\n\u003cli\u003eCompatible with existing 4.5 Inch and 6.5 Inch BDS Lifts\u003c\/li\u003e\n\u003cli\u003eEasy Installation (Only minor welding for gusset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS021303, 2020-2024 GM HD LCA Kit - Drv, UPC Code 711745611894\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021304, 2020-2024 GM HD LCA Kit - Pass, UPC Code 711745611900\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS121301, 2020-2024 GM HD Coil Over Conversion UCA Kit, UPC Code 711745612051\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS121663, 2020-2024 GM HD Coil Over Conversion Kit - 6.5 Inch, UPC Code 711745612099\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406339, Kit: 20+ GM 2500\/3500 HD Front Coilover, 2.5 Series, R\/R 6.5 Inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":49659013890336,"sku":"BDS794FPE","price":5332.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-fox-25-coil-over-conversion-upgrade-65-inch-lift-2020-2026-duramax-4wd-7799097.jpg?v=1779550029"},{"product_id":"3-inch-lift-kit-fox-performance-elite-silverado-sierra-2500hd-3500hd-20-24-3-inch-block-without-overload","title":"BDS Suspension 3 Inch Lift Kit FOX Performance Elite (2020-2026 Duramax 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eUp the ante in your 2020-2026 Chevy Silverado and GMC Sierra 2500 HD 4WD truck and improve the ride with this 3-inch lift kit featuring FOX 2.5 Performance Elite shocks from BDS Suspension.\u003c\/p\u003e\n\u003cp\u003eDesigned to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires. These kits feature proprietary FOX 2.5 shocks designed specifically to bolt-on performance for increase travel and the ability to soak up the roughest terrain along with smooth on-road comfort.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes FOX 2.5 Performance Elite reservoir shocks and heavy duty tubular upper control arms for increased strength. Along with the control arms, a pair of indexed cast steel torsion bar keys are supplied upfront to lift the vehicle and a small differential relocation kit is supplied to correct CV axle operating angles without affecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle.\u003c\/p\u003e\n\u003cp\u003eIn the rear, a 2 inch block and u-bolt kit is used to create a level to slightly tail high stance when unloaded. Rounding out these kits are a pair of specially tuned FOX 2.5 Performance Elite reservoir shocks ready to soak up the terrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX Performance Elite\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms\u003c\/p\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Torsion Key\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eDisassembly\/assembly of the factory torsion bar system requires the use of a special unloading tool. The GM specified tool #CH48809\u003c\/li\u003e\n\u003cli\u003eSome minor trimming may be necessary to fit certain wheel\/Tire combination. This is normal with most aftermarket Tire\/wheel fitment on Chevy\/GM trucks and typically consists of trimming the bottom edge of the inner fender shrouds and\/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter\/ narrower Tires will reduce\/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet.\u003c\/li\u003e\n\u003cli\u003eFOX 2.5 performance elite series shocks offer next level performance and damper capacity. Aluminum body for faster heat dispersion and Dual Speed Compression Adjust adjustabe reservoir.\u003c\/li\u003e\n\u003cli\u003ePerformance UCAs increase strength and allow for more suspension travel\u003c\/li\u003e\n\u003cli\u003eHigh strength cast torsion bar keys use an indexed design to provide additional ride height.\u003c\/li\u003e\n\u003cli\u003eSway bar relocation for proper clearance\u003c\/li\u003e\n\u003cli\u003eDifferential relocation to improve CV operating angle.\u003c\/li\u003e\n\u003cli\u003eRear block and u-bolt kit provides lift while maintaining spring function and load capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRear Lift Option 3 inch block kit without Overload\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDetermine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs.\u003c\/p\u003e\n\u003cp\u003eTire Size: 295 \/ 60 Tire Size 2: 285 \/ 65 Wheel Diameter: 20 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5.75\/6.18\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS011218, 2011-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 2 inch Rear Block w\/o Overload, UPC Code 658848611713\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS011310, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 3 inch Box Kit, UPC Code 658848611720\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326084, Kit: 20-ON GM 2500\/3500 w\/ UCA, Front, 2.5 Truck Fox Performance Elite Series, R\/R, 5.7 inch, 1.5-2.5 inch Lift, Dual Speed Compression Adjust, UPC Code 711745591325\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326085, Kit: 20-ON GM 2500\/3500, Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 10.17 inch, 0-1 Inch Lift, Dual Speed Compression Adjust, UPC Code 711745591332\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"BDS Suspension","offers":[{"title":"2 inch Block without Overload","offer_id":50799981822240,"sku":"BDS760FPE","price":4389.99,"currency_code":"USD","in_stock":true},{"title":"2 inch Block with Overload","offer_id":50799981855008,"sku":"BDS761FPE","price":4389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-3-inch-lift-kit-fox-performance-elite-2020-2026-duramax-4wd-4537210.jpg?v=1779550028"},{"product_id":"6-5-inch-lift-kit-fox-performance-elite-silverado-sierra-2500hd-3500hd-20-24-4wd-6-inch-block-kit-without-overload","title":"BDS Suspension 6.5 Inch Lift Kit FOX Performance Elite (2020-2026 Duramax 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eTake your 2020-2024 Chevy Silverado and GMC Sierra 2500 HD 4WD to the next level by installing this 6.5-inch lift kit by BDS Suspension. For maximum ground clearance, BDS designed a No Torsion Bar Drop System where the torsion bars are mounted directly to the top of the lower a-arm eliminating the need to drop the torsion bar cross-member.\u003c\/p\u003e\n\u003cp\u003eDesigned to improve the stance, performance, and capability this kit includes everything necessary to set your truck up right with clearance for up to 38 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front, the kit utilizes torsion bar relocation brackets, high-arched 1\/4-inch thick steel crossmembers along with a multipiece differential relocation brackets and heavy duty skid plates built for offroad protection.\u003c\/p\u003e\n\u003cp\u003eSteering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles. These combined with the provided sway bar drops, stainless steel brake lines, supplied hardware and more provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS offers replacement lift blocks and u-bolts to lift and level that stance. The lift block installs in place of the stock block and retains ride quality and load capacity. Also included, BDS supplies brake line and ABS line relocation brackets allow the use of factory brake lines. Lastly are a matching set of NX2 Nitro or FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with factory tie rod ends to maintain steering angles for proper function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6 inch Block Kit Without Overload\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 6 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eFor DRW models, use the w\/ overload rear lift option\u003c\/li\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003eTorsion Bar Tool required to load\/unload torsion bars\u003c\/li\u003e\n\u003cli\u003eModels with two-piece rear driveshafts will require a carrier bearing drop kit.\u003c\/li\u003e\n\u003cli\u003eFactory 17-18 inch wheels cannot be reinstalled due to tie rod end interference, stock 20 inch wheels can be reinstalled with up to a 35x12.50 Tire.\u003c\/li\u003e\n\u003cli\u003eIn some cases, vehicles used in 4WD on the highway frequently could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.\u003c\/li\u003e\n\u003cli\u003eDo not install this suspension system in conjunction with any type of torsion bar lift keys to achieve more than the tested 6.5 inch lift height.\u003c\/li\u003e\n\u003cli\u003eSome minor trim will be required with certain wheel\/Tire combinations. This is normal with most aftermarket Tire\/wheel fitment on Chevy\/GM trucks. Trimming will normally include the bottom edge of the inner fender shrouds and\/or the lower corner of the front bumper valance. As a rule of thumb, deeper backspacing and shorter\/narrower Tires will reduce\/eliminate trimming required.\u003c\/li\u003e\n\u003cli\u003eFurther trimming tips are included at the end of this instruction sheet.\u003c\/li\u003e\n\u003cli\u003eWill NOT work with AT4X or ZR2 models, lower control arm profile is different\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Clearance design w\/ no torsion bar drop maximizes ground clearance\u003c\/li\u003e\n\u003cli\u003eRobust steering knuckles maintain ESC system compliance\u003c\/li\u003e\n\u003cli\u003eHD skid plate system improved offroad protection\u003c\/li\u003e\n\u003cli\u003eMultipoint differential relocation brackets to secure the front axle and improve CV angles\u003c\/li\u003e\n\u003cli\u003eFOX 2.5 shocks designed specifically for increase travel and the ability to soak up the roughest terrain\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Wheel Diameter: 20 x 9 Back Spacing: 4.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS011516, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 6.5 inch Rear Box Kit w\/o Overloads, UPC Code 658848611911\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021690, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Knuckle Box Kit - Drv, UPC Code 658848615179\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021691, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Knuckle Box Kit - Pass, UPC Code 658848615186\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021692, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Front Box Kit 1of2, UPC Code 658848615193\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021693, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Front Box Kit 2of2, UPC Code 658848615209\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021694, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 6.5 inch Box Kit, UPC Code 658848615216\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS121661, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Skid Plate Box Kit, UPC Code 658848619276\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88426030, Kit: BDS 20-ON GM 2500\/3500 Front, 2.5 Truck Fox Performance Elite Series, R\/R, 6.5 inchРЎСљ Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88426031, Kit: BDS 20-ON GM 2500\/3500 Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 6.5 inchРЎСљ Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"6 inch Block Kit without Overload","offer_id":50781954015520,"sku":"BDS1823FPE","price":5211.99,"currency_code":"USD","in_stock":true},{"title":"6 inch Block Kit with Overload","offer_id":50781954048288,"sku":"BDS1825FPE","price":5211.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-65-inch-lift-kit-fox-performance-elite-2020-2026-duramax-4wd-8149408.jpg?v=1779549851"},{"product_id":"5-inch-lift-kit-fox-performance-elite-silverado-sierra-2500hd-3500hd-20-24-4wd-5-inch-block-without-overload","title":"BDS Suspension 5 Inch Lift Kit FOX Performance Elite (2020-2026 Duramax 4WD)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eTake your 2020-2024 Chevy Silverado and GMC Sierra 2500 HD 4WD to the next level by installing this 5-inch lift kit by BDS Suspension. For maximum ground clearance, BDS designed a No Torsion Bar Drop System where the torsion bars are mounted directly to the top of the lower a-arm eliminating the need to drop the torsion bar cross-member.\u003c\/p\u003e\n\u003cp\u003eDesigned to improve the stance, performance, and capability this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front, the kit utilizes torsion bar relocation brackets, high-arched 1\/4-inch thick steel crossmembers along with a multipiece differential relocation brackets and heavy duty skid plates built for offroad protection.\u003c\/p\u003e\n\u003cp\u003eSteering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles. These combined with the provided sway bar drops, stainless steel brake lines, supplied hardware and more provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS offers replacement lift blocks and u-bolts to lift and level that stance. The lift block installs in place of the stock block and retains ride quality and load capacity. Also included, BDS supplies brake line and ABS line relocation brackets allow the use of factory brake lines. Lastly are a matching set of NX2 Nitro or FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX Performance Elite 5 Inch Block kit without Overload\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with factory tie rod ends to maintain steering angles for proper function.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4.5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eFor DRW models, use the w\/ overload rear lift option\u003c\/li\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003eTorsion Bar Tool required to load\/unload torsion bars\u003c\/li\u003e\n\u003cli\u003eModels with two-piece rear driveshafts will require a carrier bearing drop kit.\u003c\/li\u003e\n\u003cli\u003eFactory 17-18 inch wheels cannot be reinstalled due to tie rod end interference, stock 20 inch wheels can be reinstalled with up to a 35x12.50 Tire.\u003c\/li\u003e\n\u003cli\u003eIn some cases, vehicles used in 4WD on the highway frequently could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.\u003c\/li\u003e\n\u003cli\u003eDo not install this suspension system in conjunction with any type of torsion bar lift keys to achieve more than the tested 5 inch lift height.\u003c\/li\u003e\n\u003cli\u003eSome minor trim will be required with certain wheel\/Tire combinations. This is normal with most aftermarket Tire\/wheel fitment on Chevy\/GM trucks. Trimming will normally include the bottom edge of the inner fender shrouds and\/or the lower corner of the front bumper valance. As a rule of thumb, deeper backspacing and shorter\/narrower Tires will reduce\/eliminate trimming required.\u003c\/li\u003e\n\u003cli\u003eFurther trimming tips are included at the end of this instruction sheet.\u003c\/li\u003e\n\u003cli\u003eWill NOT work with AT4X or ZR2 models, lower control arm profile is different\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Clearance design w\/ no torsion bar drop maximizes ground clearance\u003c\/li\u003e\n\u003cli\u003eRobust steering knuckles maintain ESC system compliance\u003c\/li\u003e\n\u003cli\u003eHD skid plate system improved offroad protection\u003c\/li\u003e\n\u003cli\u003eMultipoint differential relocation brackets to secure the front axle and improve CV angles\u003c\/li\u003e\n\u003cli\u003eFOX 2.5 shocks designed specifically for increase travel and the ability to soak up the roughest terrain\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 20 x 10 Wheel Diameter 2: 20 x 9 Back Spacing: 5.5\/4.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS011416, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch Rear Box Kit - w\/o Overloads, UPC Code 658848611829\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021505, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch Box Kit, UPC Code 658848614714\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021690, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Knuckle Box Kit - Drv, UPC Code 658848615179\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021691, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Knuckle Box Kit - Pass, UPC Code 658848615186\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021692, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Front Box Kit 1of2, UPC Code 658848615193\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021693, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Front Box Kit 2of2, UPC Code 658848615209\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS121661, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Skid Plate Box Kit, UPC Code 658848619276\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88426030, Kit: BDS 20-ON GM 2500\/3500 Front, 2.5 Truck Fox Performance Elite Series, R\/R, 6.5 inchРЎСљ Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88426031, Kit: BDS 20-ON GM 2500\/3500 Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 6.5 inchРЎСљ Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"5 inch Block Kit without Overload","offer_id":50781890150688,"sku":"BDS1822FPE","price":5222.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit with Overload","offer_id":50781890183456,"sku":"BDS1824FPE","price":5249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-5-inch-lift-kit-fox-performance-elite-2020-2026-duramax-4wd-4288094.jpg?v=1779549850"},{"product_id":"5-inch-lift-kit-silverado-sierra-2500hd-3500hd-20-24-4wd-5-inch-block-without-overload-fox-2-0-performance","title":"BDS Suspension 4WD 5 Inch Lift Kit (2020-2024 Duramax)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eTake your 2020-2024 Chevy Silverado and GMC Sierra 2500 HD 4WD to the next level by installing this 5-inch lift kit by BDS Suspension. For maximum ground clearance, BDS designed a No Torsion Bar Drop System where the torsion bars are mounted directly to the top of the lower a-arm eliminating the need to drop the torsion bar cross-member.\u003c\/p\u003e\n\u003cp\u003eDesigned to improve the stance, performance, and capability this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front, the kit utilizes torsion bar relocation brackets, high-arched 1\/4-inch thick steel crossmembers along with a multipiece differential relocation brackets and heavy duty skid plates built for offroad protection.\u003c\/p\u003e\n\u003cp\u003eSteering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles. These combined with the provided sway bar drops, stainless steel brake lines, supplied hardware and more provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS offers replacement lift blocks and u-bolts to lift and level that stance. The lift block installs in place of the stock block and retains ride quality and load capacity. Also included, BDS supplies brake line and ABS line relocation brackets allow the use of factory brake lines. Lastly are a matching set of NX2 Nitro or FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmembers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with factory tie rod ends to maintain steering angles for proper function.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003eTorsion Bar Tool required to load\/unload torsion bars, The GM specified tool is CH48809.\u003c\/li\u003e\n\u003cli\u003eModels with two-piece rear driveshafts will require a carrier bearing drop kit.\u003c\/li\u003e\n\u003cli\u003eFactory 17-18 inch wheels cannot be reinstalled due to tie rod end interference, stock 20 inch wheels can be reinstalled with up to a 35x12.50 Tire.\u003c\/li\u003e\n\u003cli\u003eIn some cases vehicles used in 4WD on the highway regularly could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.\u003c\/li\u003e\n\u003cli\u003eSome minor trimming will be required with certain wheel\/Tire combination. This is normal with most aftermarket Tire\/wheel fitment on Chevy\/GM trucks. Trimming will normally included the bottom edge of the inner fender shrouds and\/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter\/narrower Tires will reduce\/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet.\u003c\/li\u003e\n\u003cli\u003eWill NOT work with AT4X or ZR2 models, lower control arm profile is different\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Clearance design w\/ no torsion bar drop maximizes ground clearance\u003c\/li\u003e\n\u003cli\u003eRobust steering knuckles maintain ESC system compliance\u003c\/li\u003e\n\u003cli\u003eHD skid plate system improved offroad protection\u003c\/li\u003e\n\u003cli\u003eMultipoint differential relocation brackets to secure the front axle and improve CV angles\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003cli\u003eChoice of NX2, FOX 2.0 or FOX 2.5 gas shocks for improved performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Lift Option 5 Inch Block Kit Without Overload\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDetermine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs.\u003c\/p\u003e\n\u003cp\u003eTire Size: 35 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 20 x 10 Wheel Diameter 2: 20 x 9 Back Spacing: 5.5\/5.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShock Option\u003c\/strong\u003e \u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS011416, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch Rear Box Kit - w\/o Overloads, UPC Code 658848611829\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021505, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch Box Kit, UPC Code 658848614714\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021690, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Knuckle Box Kit - Drv, UPC Code 658848615179\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021691, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Knuckle Box Kit - Pass, UPC Code 658848615186\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021692, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Front Box Kit 1of2, UPC Code 658848615193\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021693, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Front Box Kit 2of2, UPC Code 658848615209\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS121661, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Skid Plate Box Kit, UPC Code 658848619276\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224621, Fox 2.0 Shock 21.47 x 14.60 x 2 - EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224769, Fox 2.0 Shock 31.02 x 18.95 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"5 inch Block Kit Without Overload \/ FOX 2.0 Performance Series","offer_id":50746439860512,"sku":"BDS766FS","price":3122.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit Without Overload \/ NX2 Nitro Series","offer_id":50746439893280,"sku":"BDS766H","price":2516.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit With Overload \/ FOX 2.0 Performance Series","offer_id":50746439926048,"sku":"BDS767FS","price":3149.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit With Overload \/ NX2 Nitro Series","offer_id":50746439958816,"sku":"BDS767H","price":2543.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-5-inch-lift-kit-2020-2024-duramax-4729485.jpg?v=1779549551"},{"product_id":"6-5-inch-lift-kit-silverado-sierra-2500hd-3500hd-20-24-4wd-5-inch-block-without-overload-fox-2-0-performance","title":"BDS Suspension 4WD 6.5 Inch Lift Kit (2020-2024 Duramax)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eTake your 2020-2024 Chevy Silverado and GMC Sierra 2500 HD 4WD to the next level by installing this 6.5-inch lift kit by BDS Suspension.\u003c\/p\u003e\n\u003cp\u003eFor maximum ground clearance, BDS designed a No Torsion Bar Drop System where the torsion bars are mounted directly to the top of the lower a-arm eliminating the need to drop the torsion bar cross-member.\u003c\/p\u003e\n\u003cp\u003eDesigned to improve the stance, performance, and capability this kit includes everything necessary to set your truck up right with clearance for up to 38 Inch Tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front, the kit utilizes torsion bar relocation brackets, high-arched 1\/4-inch thick steel crossmembers along with a multipiece differential relocation brackets and heavy duty skid plates built for offroad protection.\u003c\/p\u003e\n\u003cp\u003eSteering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles. These combined with the provided sway bar drops, stainless steel brake lines, supplied hardware and more provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS offers replacement lift blocks and u-bolts to lift and level that stance. The lift block installs in place of the stock block and retains ride quality and load capacity. Also included, BDS supplies brake line and ABS line relocation brackets allow the use of factory brake lines. Lastly are a matching set of NX2 Nitro or FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003eHigh Clearance Crossmembers\u003c\/p\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Steering Knuckles\u003c\/p\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with factory tie rod ends to maintain steering angles for proper function.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6.5 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eFor DRW models, use the w\/ overload rear lift option\u003c\/li\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003eTorsion Bar Tool required to load\/unload torsion bars, The GM specified tool is #CH48809.\u003c\/li\u003e\n\u003cli\u003eModels with two-piece rear driveshafts will require a carrier bearing drop kit.\u003c\/li\u003e\n\u003cli\u003eFactory 17-18 Inch wheels cannot be reinstalled due to tie rod end interference, stock 20 Inch wheels can be reinstalled with up to a 35x12.50 Tire.\u003c\/li\u003e\n\u003cli\u003eIn some cases vehicles used in 4WD on the highway regularly could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.\u003c\/li\u003e\n\u003cli\u003eDo not install this suspension system in conjunction with any type of torsion bar lift keys to achieve more that tested 6.5 Inch lift height.\u003c\/li\u003e\n\u003cli\u003eSome minor trim will be required with certain wheel\/Tire combination. This is normal with most aftermarket Tire\/wheel fitment on Chevy\/GM trucks. Trimming will normally included the bottom edge of the inner fender shrouds and\/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter\/narrower Tires will reduce\/eliminate trimming required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Clearance design w\/ no torsion bar drop maximizes ground clearance\u003c\/li\u003e\n\u003cli\u003eRobust steering knuckles maintain ESC system compliance\u003c\/li\u003e\n\u003cli\u003eHD skid plate system improved offroad protection\u003c\/li\u003e\n\u003cli\u003eMultipoint differential relocation brackets to secure the front axle and improve CV angles\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003cli\u003eChoice of NX2, FOX 2.0 or FOX 2.5 gas shocks for improved performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Lift Option 5 Inch Block Kit Without Overload\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDetermine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs.\u003c\/p\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 38 x 13.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 4.625\/6.18\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear Shock Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS011516, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 6.5 Inch Rear Box Kit w\/o Overloads, UPC Code 658848611911\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021690, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Drv, UPC Code 658848615179\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021691, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Pass, UPC Code 658848615186\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021692, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Front Box Kit 1of2, UPC Code 658848615193\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021693, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Front Box Kit 2of2, UPC Code 658848615209\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021694, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 6.5 Inch Box Kit, UPC Code 658848615216\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS121661, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Skid Plate Box Kit, UPC Code 658848619276\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224621, Fox 2.0 Shock 21.47 x 14.60 x 2 - EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224767, Fox 2.0 Shock 31.02 x 18.95 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"5 inch Block Kit Without Overload \/ FOX 2.0 Performance Series","offer_id":50746409550112,"sku":"BDS753FS","price":3111.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit Without Overload \/ NX2 Nitro Series","offer_id":50746409582880,"sku":"BDS753H","price":2505.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit With Overload \/ FOX 2.0 Performance Series","offer_id":50746409615648,"sku":"BDS756FS","price":3111.99,"currency_code":"USD","in_stock":true},{"title":"5 inch Block Kit With Overload \/ NX2 Nitro Series","offer_id":50746409648416,"sku":"BDS756H","price":2505.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-65-inch-lift-kit-2020-2024-duramax-4801319.jpg?v=1779549551"},{"product_id":"6-5-inch-lift-kit-fox-2-5-coil-over-conversion-silverado-sierra-2500hd-3500hd-20-24-diesel-block-without-factory-overload-fox-2-0-performance","title":"BDS Suspension 6.5 Inch Lift Kit FOX 2.5 Coil-Over Conversion Shocks (2020-2026 Duramax)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eBDS is a game changer in performance of your 2020-2026 Chevy Silverado and GMC Sierra 2500 HD truck with a 6.5-inch suspension lift kit with FOX 2.5 Coil-Over conversion. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38 Inch Tires.\u003c\/p\u003e\n\u003cp\u003eThese kits feature proprietary FOX 2.5 coil-over shocks designed specifically to bolt-on performance for increased travel and the ability to soak up the roughest terrain along with smooth on-road comfort.\u003c\/p\u003e\n\u003cp\u003eIn addition to replacing the factory torsion bars, the upper and lower control arms are upgraded to improve strength, travel, and accommodate the new coilovers. The new upper control arms are fabricated from large 1.5 Inch OD x .120-wall tubing, fully TIG welded for the highest quality, strength and durability.\u003c\/p\u003e\n\u003cp\u003eTo compliment the uppers, the new lower control arms are built from high strength steel, fully boxed with internally gusseted.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front, the kit utilizes FOX 2.5 coil-over shocks, heavy duty tubular upper control arms, fully boxed and gusseted lower control arms, high-arched 1\/4-inch thick steel crossmembers, and a multipiece differential relocation brackets and heavy duty skid plates built for offroad protection. Steering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles.\u003c\/p\u003e\n\u003cp\u003eThese combined with the provided sway bar links, bump stop extensions, stainless steel brake lines, CV spacers, supplied hardware and more provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS offers replacement lift blocks to lift and level that stance. The lift block installs in place of the stock block and retains ride quality and load capacity. Also for the rear is a u-bolt flip kit for max clearance and precision tuned FOX 2.0 Performance Series shocks for ultimate off road performance.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain.\u003c\/p\u003e\n\u003cp\u003eThe Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Control Arms\u003c\/p\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these control arms are ready to bolt-in. The upper arms use 1.5 Inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eThe new lower control arms are built from high strength steel, fully boxed with internally gusseted. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability.\u003c\/p\u003e\n\u003cp\u003eArms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6.5 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eModels with two-piece rear drive shafts will require a carrier bearing drop kit. (BDS121612)\u003c\/li\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003eDisassembly\/assembly of the factory torsion bar system requires the use of a special unloading tool. The GM specified tool # is CH48809.\u003c\/li\u003e\n\u003cli\u003eCompatible with diesel models ONLY. Works with standard or AT4 diesel models.\u003c\/li\u003e\n\u003cli\u003eSome minor trim will be required with certain wheel\/Tire combination. This is normal with most aftermarket Tire\/wheel fitment on Chevy\/GM trucks. Trimming will normally include the bottom edge of the inner fender shrouds and\/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter\/narrower Tires will reduce\/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet.\u003c\/li\u003e\n\u003cli\u003eFactory 17-18 Inch wheels cannot be reinstalled due to tie rod end interference, stock 20 Inch wheels can be reinstalled with up to a 37x12.50 Tire.\u003c\/li\u003e\n\u003cli\u003eIn some cases vehicles used in 4WD on the highway regularly could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.\u003c\/li\u003e\n\u003cli\u003eCoilover coil has a large amount of preload, a coil spring compressor must be used to remove the coil from the coilover. Failure to use a coil spring compressor may result in death or injury.\u003c\/li\u003e\n\u003cli\u003eDo not increase coilover preload.\u003c\/li\u003e\n\u003cli\u003eFor DRW models, use the w\/ overload rear lift option.\u003c\/li\u003e\n\u003cli\u003eWill NOT work with AT4X or ZR2 models, lower control arm profile is different\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 coil-overs offer improved damper performance over stock\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression Adjust Adjuster allows easy high-speed and low-speed compression tuning for optimal performance in any terrain\u003c\/li\u003e\n\u003cli\u003ePerformance UCAs increase strength and allow for more suspension travel\u003c\/li\u003e\n\u003cli\u003eHigh Clearance design w\/ no torsion bar drop maximizes ground clearance\u003c\/li\u003e\n\u003cli\u003eRobust steering knuckles maintain ESC system compliance\u003c\/li\u003e\n\u003cli\u003eHD skid plate system improved offroad protection\u003c\/li\u003e\n\u003cli\u003eMultipoint differential relocation brackets to secure the front axle and improve CV angles\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS011516, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 6.5 Inch Rear Box Kit w\/o Overloads, UPC Code 658848611911\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021303, 2020-2024 GM HD LCA Kit - Drv, UPC Code 711745611894\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021304, 2020-2024 GM HD LCA Kit - Pass, UPC Code 711745611900\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021690, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Drv, UPC Code 658848615179\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021691, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Pass, UPC Code 658848615186\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021692, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Front Box Kit 1of2, UPC Code 658848615193\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS021693, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Front Box Kit 2of2, UPC Code 658848615209\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS121301, 2020-2024 GM HD Coil Over Conversion UCA Kit, UPC Code 711745612051\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS121661, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Skid Plate Box Kit, UPC Code 658848619276\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS121663, 2020-2024 GM HD Coil Over Conversion Kit - 6.5 Inch, UPC Code 711745612099\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406339, Kit: 20+ GM 2500\/3500 HD Front Coilover, 2.5 Series, R\/R 6.5 Inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224767, Fox 2.0 Shock 31.02 x 18.95 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Block Kit Without Factory Overload \/ FOX 2.0 Performance Series","offer_id":50732442059040,"sku":"BDS753FPE","price":7586.99,"currency_code":"USD","in_stock":true},{"title":"Block Kit Without Factory Overload \/ FOX 2.5 Performance Elite","offer_id":50732442091808,"sku":"BDS792FPE","price":8636.99,"currency_code":"USD","in_stock":true},{"title":"Block Kit With Factory Overload \/ FOX 2.0 Performance Series","offer_id":50732442124576,"sku":"BDS756FPE","price":7586.99,"currency_code":"USD","in_stock":true},{"title":"Block Kit With Factory Overload \/ FOX 2.5 Performance Elite","offer_id":50732442157344,"sku":"BDS793FPE","price":8636.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-65-inch-lift-kit-fox-25-coil-over-conversion-shocks-2020-2026-duramax-5782124.jpg?v=1779549549"},{"product_id":"20-24-gm-2500hd-3500hd-4wd-5-inch-suspension-lift-system-4-5-inch-rear-lift-block-w-o-overload-fox-2-5-hto-bds-suspension","title":"BDS Suspension 4WD 5 Inch Lift System, 4.5 Inch Rear Lift, Fox 2.5 HTO Performance Series (2020-2024 Duramax)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eTake your 2020-2024 Chevy Silverado and GMC Sierra 2500 HD\/3500 4WD to the next level by installing this 5-inch lift kit by BDS Suspension. For maximum ground clearance, BDS designed a No Torsion Bar Drop System where the torsion bars are mounted directly to the top of the lower a-arm eliminating the need to drop the torsion bar cross-member. Designed to improve the stance, performance, and capability this kit includes everything necessary to set your truck up right with clearance for up to 37 inch tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great onroad handling characteristics. Up front, the kit utilizes torsion bar relocation brackets, high-arched 1\/4-inch thick steel crossmembers along with a multipiece differential relocation brackets and heavy duty skid plates built for offroad protection.\u003c\/p\u003e\n\u003cp\u003eSteering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles. These combined with the provided sway bar drops, stainless steel brake lines, supplied hardware and more provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS offers replacement lift blocks and u-bolts to lift and level that stance. The lift block installs in place of the stock block and retains ride quality and load capacity. Also included, BDS supplies brake line and ABS line relocation brackets allow the use of factory brake lines. Lastly are a matching set of NX2 Nitro or FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Clearance Crossmembers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Steering Knuckles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with factory tie rod ends to maintain steering angles for proper function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2020-2024 GM 2500HD\/3500HD 4wd 5 Inch Suspension Lift System, 4.5 Inch Rear Lift, Block, w\/o overload Fox 2.5 HTO\u003c\/li\u003e\n\u003cli\u003eHigh Clearance design w\/ no torsion bar drop maximizes ground clearance\u003c\/li\u003e\n\u003cli\u003eRobust steering knuckles maintain ESC system compliance\u003c\/li\u003e\n\u003cli\u003eHD skid plate system improved offroad protection\u003c\/li\u003e\n\u003cli\u003eMultipoint differential relocation brackets to secure the front axle and improve CV angles\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003cli\u003eFOX 2.5 gas shocks for improved performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1. Requires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003e2. Torsion Bar Tool required to load\/unload torsion bars, The GM specified tool is part number CH48809.\u003c\/li\u003e\n\u003cli\u003e3. Models with two-piece rear driveshafts will require a carrier bearing drop kit.\u003c\/li\u003e\n\u003cli\u003e4. Factory 17-18 inch wheels cannot be reinstalled due to tie rod end interference, stock 20 inch wheels can be reinstalled with up to a 35x12.50 tire.\u003c\/li\u003e\n\u003cli\u003e5. In some cases vehicles used in 4WD on the highway regularly could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.\u003c\/li\u003e\n\u003cli\u003e6. Some minor trimming will be required with certain wheel\/tire combination. This is normal with most aftermarket tire\/wheel fitment on Chevy\/GM trucks. Trimming will normally included the bottom edge\u003c\/li\u003e\n\u003cli\u003e7. Will Not work with AT4X or ZR2 models, lower control arm profile is different\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes Two FOX98724024,BDS 2020-ON GM 2500\/3500, Front, 2.5 Truck PS, IFP, 6.5 Inch Lift, HTO, UPC Code 692878899376\u003cbr\u003eIncludes Two FOX98724024,BDS 2020-ON GM 2500\/3500, Rear, 2.5 Truck PS, IFP, 6.5 Inch Lift, HTO, UPC Code 692878899383\u003cbr\u003eIncludes One BDS021690,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Drv, UPC Code 658848615179\u003cbr\u003eIncludes One BDS021691,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Pass, UPC Code 658848615186\u003cbr\u003eIncludes One BDS021692,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Front Box Kit 1of2, UPC Code 658848615193\u003cbr\u003eIncludes One BDS021693,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Front Box Kit 2of2, UPC Code 658848615209\u003cbr\u003eIncludes One BDS021505,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch Box Kit, UPC Code 658848614714\u003cbr\u003eIncludes One BDS121661,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Skid Plate Box Kit, UPC Code 658848619276\u003cbr\u003eIncludes One BDS011416,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch Rear Box Kit - w\/o Overloads, UPC Code 658848611829\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Without Factory Overload","offer_id":50729290826016,"sku":"BDS766FPP","price":3710.99,"currency_code":"USD","in_stock":true},{"title":"With Factory Overload","offer_id":50729290858784,"sku":"BDS767FPP","price":3710.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-5-inch-lift-system-45-inch-rear-lift-fox-25-hto-performance-series-2020-2024-duramax-8666624.jpg?v=1779549489"},{"product_id":"20-24-gm-2500hd-3500hd-4wd-6-5-inch-suspension-lift-system-6-inch-rear-lift-block-w-o-overload-fox-2-5-hto-bds-suspension","title":"BDS Suspension 4WD 6.5 Inch Lift System, 6 Inch Rear Lift, Fox 2.5 HTO Performance Series (2020-2026 Duramax)","description":"\u003cp class=\"p1\"\u003e**You will be contacted and charged separately about shipping cost.**\u003c\/p\u003e\n\u003cp\u003eTake your 2020-2024 Chevy Silverado and GMC Sierra 2500 HD\/3500 4WD to the next level by installing this 5-inch lift kit by BDS Suspension. For maximum ground clearance, BDS designed a No Torsion Bar Drop System where the torsion bars are mounted directly to the top of the lower a-arm eliminating the need to drop the torsion bar cross-member. Designed to improve the stance, performance, and capability this kit includes everything necessary to set your truck up right with clearance for up to 37 inch tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great onroad handling characteristics. Up front, the kit utilizes torsion bar relocation brackets, high-arched 1\/4-inch thick steel crossmembers along with a multipiece differential relocation brackets and heavy duty skid plates built for offroad protection.\u003c\/p\u003e\n\u003cp\u003eSteering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles. These combined with the provided sway bar drops, stainless steel brake lines, supplied hardware and more provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS offers replacement lift blocks and u-bolts to lift and level that stance. The lift block installs in place of the stock block and retains ride quality and load capacity. Also included, BDS supplies brake line and ABS line relocation brackets allow the use of factory brake lines. Lastly are a matching set of NX2 Nitro or FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Clearance Crossmembers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Steering Knuckles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with factory tie rod ends to maintain steering angles for proper function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2020-2024 GM 2500HD\/3500HD 4wd 6.5 Inch Suspension Lift System, 6 Inch Rear Lift, Block, w\/o overload Fox 2.5 HTO\u003c\/li\u003e\n\u003cli\u003eHigh Clearance design w\/ no torsion bar drop maximizes ground clearance\u003c\/li\u003e\n\u003cli\u003eRobust steering knuckles maintain ESC system compliance\u003c\/li\u003e\n\u003cli\u003eHD skid plate system improved offroad protection\u003c\/li\u003e\n\u003cli\u003eMultipoint differential relocation brackets to secure the front axle and improve CV angles\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003cli\u003eFOX 2.5 gas shocks for improved performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1. Requires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003e2. Torsion Bar Tool required to load\/unload torsion bars, The GM specified tool is part number CH48809.\u003c\/li\u003e\n\u003cli\u003e3. Models with two-piece rear driveshafts will require a carrier bearing drop kit.\u003c\/li\u003e\n\u003cli\u003e4. Factory 17-18 inch wheels cannot be reinstalled due to tie rod end interference, stock 20 inch wheels can be reinstalled with up to a 35x12.50 tire.\u003c\/li\u003e\n\u003cli\u003e5. In some cases vehicles used in 4WD on the highway regularly could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.\u003c\/li\u003e\n\u003cli\u003e6. Some minor trimming will be required with certain wheel\/tire combination. This is normal with most aftermarket tire\/wheel fitment on Chevy\/GM trucks. Trimming will normally included the bottom edge\u003c\/li\u003e\n\u003cli\u003e7. Will Not work with AT4X or ZR2 models, lower control arm profile is different\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes Two FOX98724024,BDS 2020-ON GM 2500\/3500, Front, 2.5 Truck PS, IFP, 6.5 Inch Lift, HTO, UPC Code 692878899376\u003cbr\u003eIncludes Two FOX98724024,BDS 2020-ON GM 2500\/3500, Rear, 2.5 Truck PS, IFP, 6.5 Inch Lift, HTO, UPC Code 692878899383\u003cbr\u003eIncludes One BDS021690,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Drv, UPC Code 658848615179\u003cbr\u003eIncludes One BDS021691,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Pass, UPC Code 658848615186\u003cbr\u003eIncludes One BDS021692,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Front Box Kit 1 of 2, UPC Code 658848615193\u003cbr\u003eIncludes One BDS021693,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Front Box Kit 2 of 2, UPC Code 658848615209\u003cbr\u003eIncludes One BDS021694,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 6.5 Inch Box Kit, UPC Code 658848615216\u003cbr\u003eIncludes One BDS121661,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Skid Plate Box Kit, UPC Code 658848619276\u003cbr\u003eIncludes One BDS011516,2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 6.5 Inch Rear Box Kit w\/o Overloads, UPC Code 658848611911\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Without Factory Overload","offer_id":50729279226144,"sku":"BDS753FPP","price":3699.99,"currency_code":"USD","in_stock":true},{"title":"With Factory Overload","offer_id":50729279258912,"sku":"BDS756FPP","price":3699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/3043\/6640\/files\/bds-suspension-4wd-65-inch-lift-system-6-inch-rear-lift-fox-25-hto-performance-series-2020-2026-duramax-5432277.jpg?v=1779549489"}],"url":"https:\/\/www.southerndieselsupply.com\/collections\/chevrolet-2024-present-l5p-suspension-lift-kit.oembed","provider":"Southern Diesel Supply","version":"1.0","type":"link"}